linux-kernel - Re: [RESEND v2] Kbuild: Update config_data.gz only if KCONFIG

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <42674c78-28d7-35b5-5e01-07dec7eed938@codeaurora.org>
Date:   Mon, 26 Apr 2021 09:16:24 -0700
From:   Elliot Berman <eberman@...eaurora.org>
To:     Masahiro Yamada <masahiroy@...nel.org>
Cc:     Michal Marek <michal.lkml@...kovi.net>,
        Linux Kbuild mailing list <linux-kbuild@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Matthias Maennich <maennich@...gle.com>,
        Trilok Soni <tsoni@...eaurora.org>
Subject: Re: [RESEND v2] Kbuild: Update config_data.gz only if KCONFIG_CONFIG
 materially changed



On 4/24/2021 11:50 PM, Masahiro Yamada wrote:
> On Sat, Apr 24, 2021 at 2:02 AM Elliot Berman <eberman@...eaurora.org> wrote:
> 
> 
> Sorry for the delay.

No problem!

> 
> This patch is over-engineering.

I thought so, too.

> 
> I will apply this.
> https://patchwork.kernel.org/project/linux-kbuild/patch/20210425062407.1183801-5-masahiroy@kernel.org/
> 
> The 'cmp' command is not expensive.
> md5sum is unneeded.

Thanks!

> 
>> If you update the timestamp of KCONFIG_CONFIG without actually changing
>> anything, config_data.gz is re-generated and causes vmlinux to re-link.
>> When Link Time Optimization is enabled, unnecessary re-linking of
>> vmlinux is highly desirable since it adds several minutes to build time.
>>
>> Avoid touching config_data.gz by using a script to compare the existing
>> config_data.gz, KCONFIG_CONFIG, or script itself to update only if any
>> is mismatched.  The script follows gen_kheaders.sh approach for
>> determing in update is needed. The script intentionally avoids
>> re-compressing KCONFIG_CONFIG.
>>
>> The .config can be touched, for instance, by a build script which
>> installs the default defconfig and then applies a defconfig fragment on
>> top.
>>
>> For a simple example on my x86 machine, I modified x86 default defconfig to set
>> CONFIG_IKCONFIG=y and run:
>>    make -j50 defconfig tiny.config vmlinux
>>    make -j50 defconfig tiny.config vmlinux
>> With this patch, vmlinux is not re-built as a result of config_data.gz
>> change.
>>
>> Changes in v2:
>>   - Use md5 checksum to compare .config instead of gzip'ing again
>>
>> Signed-off-by: Elliot Berman <eberman@...eaurora.org>
>> ---
>>   kernel/.gitignore         |  1 +
>>   kernel/Makefile           |  4 +++-
>>   kernel/gen_config_data.sh | 31 +++++++++++++++++++++++++++++++
>>   3 files changed, 35 insertions(+), 1 deletion(-)
>>   create mode 100755 kernel/gen_config_data.sh
>>
>> diff --git a/kernel/.gitignore b/kernel/.gitignore
>> index 78701ea..a191136 100644
>> --- a/kernel/.gitignore
>> +++ b/kernel/.gitignore
>> @@ -1,4 +1,5 @@
>>   # SPDX-License-Identifier: GPL-2.0-only
>> +config_data.gz.md5
>>   kheaders.md5
>>   timeconst.h
>>   hz.bc
>> diff --git a/kernel/Makefile b/kernel/Makefile
>> index 320f1f3..0784bf3d 100644
>> --- a/kernel/Makefile
>> +++ b/kernel/Makefile
>> @@ -139,8 +139,10 @@ obj-$(CONFIG_SCF_TORTURE_TEST) += scftorture.o
>>   $(obj)/configs.o: $(obj)/config_data.gz
>>
>>   targets += config_data.gz
>> +quiet_cmd_genicfg = CHK     $(obj)/config_data.gz
>> +      cmd_genicfg = $(CONFIG_SHELL) $(srctree)/kernel/gen_config_data.sh $@ $<
>>   $(obj)/config_data.gz: $(KCONFIG_CONFIG) FORCE
>> -       $(call if_changed,gzip)
>> +       $(call cmd,genicfg)
>>
>>   $(obj)/kheaders.o: $(obj)/kheaders_data.tar.xz
>>
>> diff --git a/kernel/gen_config_data.sh b/kernel/gen_config_data.sh
>> new file mode 100755
>> index 00000000..e9ff193
>> --- /dev/null
>> +++ b/kernel/gen_config_data.sh
>> @@ -0,0 +1,31 @@
>> +#!/bin/sh
>> +# SPDX-License-Identifier: GPL-2.0
>> +
>> +# This script generates a compressed version of .config, if its checksum has changed
>> +set -e
>> +
>> +this_file="$(readlink -f "$0")"
>> +outfile=$1
>> +infile=$2
>> +
>> +config_md5="$(md5sum $infile | cut -d ' ' -f1)"
>> +# Any changes to this script will also cause a rebuild of config_data.
>> +this_file_md5="$(md5sum $sfile | cut -d ' ' -f1)"
>> +if [ -f $outfile ]; then outfile_md5="$(md5sum $outfile | cut -d ' ' -f1)"; fi
>> +
>> +if [ -f $outfile.md5 ] &&
>> +       [ "$(head -n 1 $outfile.md5)" = "$config_md5" ] &&
>> +       [ "$(head -n 2 $outfile.md5 | tail -n 1)" = "$this_file_md5" ] &&
>> +       [ "$(tail -n 1 $outfile.md5)" = "$outfile_md5" ]; then
>> +               exit
>> +fi
>> +
>> +if [ "${quiet}" != "silent_" ]; then
>> +       echo "  GEN     $outfile"
>> +fi
>> +
>> +${KGZIP} -c -n -f -9 $infile > $outfile
>> +
>> +echo "$config_md5" > $outfile.md5
>> +echo "$this_file_md5" >> $outfile.md5
>> +echo "$(md5sum $outfile | cut -d ' ' -f1)" >> $outfile.md5
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
>> a Linux Foundation Collaborative Project
>>
> 
>