| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210428085825.GH6446@dell>
Date: Wed, 28 Apr 2021 09:58:25 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: [GIT PULL] MFD for v5.13
Good morning Linus,
The following changes since commit 0d02ec6b3136c73c09e7859f0d0e4e2c4c07b49b:
Linux 5.12-rc4 (2021-03-21 14:56:43 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git tags/mfd-next-5.13
for you to fetch changes up to f9386c91574fe6da9f4fca9a47734816b0db0019:
mfd: intel-m10-bmc: Add support for MAX10 BMC Secure Updates (2021-04-14 16:06:57 +0100)
----------------------------------------------------------------
- Core Frameworks
- Add support for Software Nodes to MFD Core
- Remove support for Device Properties from MFD Core
- Use standard APIs in MFD Core
- New Drivers
- Add support for ROHM BD9576MUF and BD9573MUF PMICs
- Add support for Netronix Embedded Controller, PWM and RTC
- Add support for Actions Semi ATC260x PMICs and OnKey
- New Device Support
- Add support for DG1 PCIe Graphics Card to Intel PMT
- Add support for ROHM BD71815 PMIC to ROHM BD71828
- Add support for Tolino Shine 2 HD to Netronix Embedded Controller
- Add support for AX10 BMC Secure Updates to Intel M10 BMC
- Removed Device Support
- Remove Arizona Extcon support from MFD
- Remove ST-E AB8500 Power Supply code from MFD
- Remove AB3100 altogether
- New Functionality
- Add support for SMBus and I2C modes to Dialog DA9063
- Switch to using Software Nodes in Intel (various)
- New/converted Device Tree bindings; rohm,bd71815-pmic, rohm,bd9576-pmic,
netronix,ntxec, actions,atc260x,
ricoh,rn5t618, qcom-pm8xxx
- Fix-ups
- Fix error handling/path; intel_pmt
- Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc
- Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618, max8997
- Use correct data-type; db8500-prcmu
- Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl
- Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio
- Regmap related fix-ups; intel-m10-bmc, sec-core
- Reorder resource freeing during remove; intel_quark_i2c_gpio
- Make table indexing more robust; intel_quark_i2c_gpio
- Fix reference imbalances; arizona-irq
- Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930,
intel-lpss-acpi, intel-lpss-pci,
atc260x-i2c, intel_quark_i2c_gpio
- Bug Fixes
- Fix incorrect (register) values; intel-m10-bmc
- Kconfig related fixes; ABX500_CORE
- Do not clear the Auto Reload Register; stm32-timers
----------------------------------------------------------------
Andreas Kemnade (3):
dt-bindings: mfd: Convert rn5t618 to json-schema
mfd: rn5t618: Do not cache various USB related registers
mfd: ntxec: Support for EC in Tolino Shine 2 HD
Andy Shevchenko (11):
mfd: intel-lpss: Constify device property structures
mfd: intel_quark_i2c_gpio: Unregister resources in reversed order
mfd: intel_quark_i2c_gpio: Remove unused struct device member
mfd: intel_quark_i2c_gpio: Replace I²C speeds with descriptive definitions
mfd: intel_quark_i2c_gpio: Reuse BAR definitions for MFD cell indexing
mfd: intel_quark_i2c_gpio: Enable MSI interrupt
mfd: intel_quark_i2c_gpio: Don't play dirty trick with const
mfd: core: Use acpi_find_child_device() for child devices lookup
mfd: lpc_sch: Partially revert "Add support for Intel Quark X1000"
mfd: intel_quark_i2c_gpio: Convert I²C to use software nodes
i2c: designware: Get rid of legacy platform data
Arnd Bergmann (1):
mfd: Remove support for AB3100
Cristian Ciocaltea (4):
dt-bindings: input: Add reset-time-sec common property
dt-bindings: mfd: Add Actions Semi ATC260x PMIC binding
mfd: Add MFD driver for ATC260x PMICs
input: atc260x: Add onkey driver for ATC260x PMICs
David E. Box (2):
mfd: intel_pmt: Fix nuisance messages and handling of disabled capabilities
mfd: intel_pmt: Add support for DG1
Dinghao Liu (1):
mfd: arizona: Fix rumtime PM imbalance on error
Fabrice Gasnier (1):
mfd: stm32-timers: Avoid clearing auto reload register
Geert Uytterhoeven (1):
mfd: Kconfig: ABX500_CORE should depend on ARCH_U8500
Hans de Goede (6):
mfd: arizona: Drop arizona-extcon cells
extcon: arizona: Fix some issues when HPDET IRQ fires after the jack has been unplugged
extcon: arizona: Fix various races on driver unbind
extcon: arizona: Fix flags parameter to the gpiod_get("wlf,micd-pol") call
extcon: arizona: Always use pm_runtime_get_sync() when we need the device to be awake
ASoC/extcon: arizona: Move arizona jack code to sound/soc/codecs/arizona-jack.c
Heikki Krogerus (3):
mfd: core: Add support for software nodes
mfd: intel-lpss: Switch to use the software nodes
mfd: core: Remove support for dangling device properties
Hubert Streidl (1):
mfd: da9063: Support SMBus and I2C mode
Jiapeng Chong (1):
mfd: dbx500-prcmu: Use true and false for bool variable
Jonathan Neuschäfer (6):
dt-bindings: Add vendor prefix for Netronix, Inc.
dt-bindings: mfd: Add binding for Netronix embedded controller
mfd: Add base driver for Netronix embedded controller
pwm: ntxec: Add driver for PWM function in Netronix EC
rtc: New driver for RTC in Netronix embedded controller
MAINTAINERS: Add entry for Netronix embedded controller
Krzysztof Kozlowski (2):
MAINTAINERS: Move Milo Kim to credits
mfd: sec: Initialize driver via module_platform_driver()
Lee Jones (3):
Merge tags 'ib-mfd-clk-gpio-regulator-rtc-v5.13', 'ib-mfd-extcon-v5.13', 'ib-mfd-input-v5.13-1', 'ib-mfd-platform-x86-v5.13', 'ib-mfd-power-v5.13', 'ib-mfd-pwm-rtc-v5.13-1' and 'ib-regulator-list-ramp-helpers-v5.13' into ibs-for-mfd-merged
Merge tag 'ib-mfd-watchdog-v5.13' into ibs-for-mfd-merged
dt-bindings: mfd: ricoh,rn5t618: Trivial: Fix spelling mistake of 'additionally'
Linus Walleij (5):
power: ab8500: Require device tree
mfd/power: ab8500: Push data to power supply code
mfd/power: ab8500: Push algorithm to power supply code
mfd/power: ab8500: Push data to power supply code
mfd: ab8500: Drop bm disable parameter
Luca Ceresoli (2):
mfd: lp87565: Remove unused define 'LP87565_NUM_BUCK'
dt-bindings: mfd: lp875xx: Add optional reset GPIO
Manivannan Sadhasivam (1):
MAINTAINERS: Add entry for ATC260x PMIC
Matthew Gerlach (1):
mfd: intel-m10-bmc: Add access table configuration to the regmap
Matti Vaittinen (24):
dt_bindings: mfd: Add ROHM BD9576MUF and BD9573MUF PMICs
mfd: Support ROHM BD9576MUF and BD9573MUF
mfd: bd9576: Add IRQ support
wdt: Support wdt on ROHM BD9576MUF and BD9573MUF
MAINTAINERS: Add ROHM BD9576MUF and BD9573MUF drivers
mfd: bd9576: Add safety limit/monitoring registers
regulator: helpers: Export helper voltage listing
regulator: Add regmap helper for ramp-delay setting
rtc: bd70528: Do not require parent data
mfd: bd718x7: simplify by cleaning unnecessary device data
dt_bindings: bd71828: Add clock output mode
dt_bindings: regulator: Add ROHM BD71815 PMIC regulators
dt_bindings: mfd: Add ROHM BD71815 PMIC
mfd: Add ROHM BD71815 ID
mfd: Sort ROHM chip ID list for better readability
mfd: Support for ROHM BD71815 PMIC core
gpio: Support ROHM BD71815 GPOs
regulator: rohm-regulator: linear voltage support
regulator: rohm-regulator: Support SNVS HW state.
regulator: bd718x7, bd71828: Use ramp-delay helper
regulator: Support ROHM BD71815 regulators
clk: bd718x7: Add support for clk gate on ROHM BD71815 PMIC
rtc: bd70528: Support RTC on ROHM BD71815
MAINTAINERS: Add ROHM BD71815AGW
Rikard Falkeborn (1):
mfd: stmpe: Revert "Constify static struct resource"
Russ Weight (1):
mfd: intel-m10-bmc: Add support for MAX10 BMC Secure Updates
Timon Baetz (2):
mfd: max8997: Replace 8998 with 8997
Revert "mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell"
Wei Yongjun (3):
mfd: arizona: Make some symbols static
mfd: ene-kb3930: Make local symbol 'kb3930_power_off' static
mfd: Make symbol 'atc260x_i2c_of_match' static
Xu Yilun (4):
MAINTAINERS: Add entry for Intel MAX 10 mfd driver
mfd: intel-m10-bmc: Fix the register access range
mfd: intel-m10-bmc: Simplify the legacy version reg definition
MAINTAINERS: Add entry for Intel MAX 10 mfd driver
Yang Li (1):
mfd: lm3533: Switch to using the new API kobj_to_dev()
YueHaibing (1):
mfd: twl: Remove unused inline function twl4030charger_usb_en()
satya priya (2):
dt-bindings: mfd: Add compatible for pmk8350 rtc
dt-bindings: mfd: Convert pm8xxx bindings to yaml
CREDITS | 3 +
Documentation/devicetree/bindings/input/input.yaml | 7 +
.../devicetree/bindings/mfd/actions,atc260x.yaml | 183 ++++
.../devicetree/bindings/mfd/netronix,ntxec.yaml | 76 ++
.../devicetree/bindings/mfd/qcom-pm8xxx.txt | 99 ---
.../devicetree/bindings/mfd/qcom-pm8xxx.yaml | 54 ++
.../devicetree/bindings/mfd/ricoh,rn5t618.yaml | 111 +++
Documentation/devicetree/bindings/mfd/rn5t618.txt | 52 --
.../devicetree/bindings/mfd/rohm,bd71815-pmic.yaml | 201 +++++
.../devicetree/bindings/mfd/rohm,bd71828-pmic.yaml | 6 +
.../devicetree/bindings/mfd/rohm,bd9576-pmic.yaml | 123 +++
.../devicetree/bindings/mfd/ti,lp87524-q1.yaml | 4 +
.../devicetree/bindings/mfd/ti,lp87561-q1.yaml | 4 +
.../devicetree/bindings/mfd/ti,lp87565-q1.yaml | 4 +
.../bindings/regulator/rohm,bd71815-regulator.yaml | 116 +++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 74 +-
drivers/clk/clk-bd718x7.c | 9 +-
drivers/extcon/Kconfig | 8 -
drivers/extcon/Makefile | 1 -
drivers/gpio/Kconfig | 10 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-bd71815.c | 185 ++++
drivers/i2c/busses/i2c-designware-platdrv.c | 7 +-
drivers/input/misc/Kconfig | 11 +
drivers/input/misc/Makefile | 2 +-
drivers/input/misc/atc260x-onkey.c | 305 +++++++
drivers/mfd/Kconfig | 82 +-
drivers/mfd/Makefile | 7 +-
drivers/mfd/ab3100-core.c | 929 ---------------------
drivers/mfd/ab3100-otp.c | 240 ------
drivers/mfd/ab8500-core.c | 37 +-
drivers/mfd/arizona-core.c | 20 -
drivers/mfd/arizona-irq.c | 2 +-
drivers/mfd/arizona-spi.c | 4 +-
drivers/mfd/atc260x-core.c | 310 +++++++
drivers/mfd/atc260x-i2c.c | 64 ++
drivers/mfd/da9063-i2c.c | 10 +
drivers/mfd/ene-kb3930.c | 2 +-
drivers/mfd/intel-lpss-acpi.c | 32 +-
drivers/mfd/intel-lpss-pci.c | 46 +-
drivers/mfd/intel-lpss.c | 2 +-
drivers/mfd/intel-lpss.h | 4 +-
drivers/mfd/intel-m10-bmc.c | 30 +-
drivers/mfd/intel_pmt.c | 112 ++-
drivers/mfd/intel_quark_i2c_gpio.c | 112 +--
drivers/mfd/lm3533-core.c | 2 +-
drivers/mfd/lpc_sch.c | 32 +-
drivers/mfd/max8997.c | 4 +-
drivers/mfd/mfd-core.c | 29 +-
drivers/mfd/ntxec.c | 271 ++++++
drivers/mfd/rn5t618.c | 3 +
drivers/mfd/rohm-bd71828.c | 486 ++++++++---
drivers/mfd/rohm-bd718x7.c | 43 +-
drivers/mfd/rohm-bd9576.c | 189 +++++
drivers/mfd/sec-core.c | 14 +-
drivers/mfd/stm32-timers.c | 7 +-
drivers/mfd/stmpe.c | 14 +-
drivers/platform/x86/intel_pmt_class.c | 46 +
drivers/platform/x86/intel_pmt_class.h | 1 +
drivers/platform/x86/intel_pmt_telemetry.c | 20 -
drivers/power/supply/Kconfig | 2 +-
.../abx500 => drivers/power/supply}/ab8500-bm.h | 297 ++++++-
.../power/supply/ab8500-chargalg.h | 6 +-
drivers/power/supply/ab8500_bmdata.c | 3 +-
drivers/power/supply/ab8500_btemp.c | 45 +-
drivers/power/supply/ab8500_charger.c | 27 +-
drivers/power/supply/ab8500_fg.c | 20 +-
drivers/power/supply/abx500_chargalg.c | 22 +-
drivers/power/supply/pm2301_charger.c | 4 +-
drivers/pwm/Kconfig | 8 +
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-ntxec.c | 184 ++++
drivers/regulator/Kconfig | 11 +
drivers/regulator/Makefile | 1 +
drivers/regulator/bd71815-regulator.c | 652 +++++++++++++++
drivers/regulator/bd71828-regulator.c | 51 +-
drivers/regulator/bd718x7-regulator.c | 60 +-
drivers/regulator/helpers.c | 101 ++-
drivers/regulator/rohm-regulator.c | 23 +-
drivers/rtc/Kconfig | 14 +-
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-bd70528.c | 104 ++-
drivers/rtc/rtc-ntxec.c | 145 ++++
drivers/watchdog/Kconfig | 13 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/bd9576_wdt.c | 291 +++++++
include/linux/mfd/ab3100.h | 128 ---
include/linux/mfd/abx500.h | 276 ------
include/linux/mfd/atc260x/atc2603c.h | 281 +++++++
include/linux/mfd/atc260x/atc2609a.h | 308 +++++++
include/linux/mfd/atc260x/core.h | 58 ++
include/linux/mfd/core.h | 6 +-
include/linux/mfd/da9063/registers.h | 3 +
include/linux/mfd/db8500-prcmu.h | 2 +-
include/linux/mfd/intel-m10-bmc.h | 92 +-
include/linux/mfd/lp87565.h | 3 -
include/linux/mfd/max8997.h | 8 +-
include/linux/mfd/ntxec.h | 38 +
include/linux/mfd/rn5t618.h | 1 +
include/linux/mfd/rohm-bd71815.h | 562 +++++++++++++
include/linux/mfd/rohm-bd71828.h | 3 +
include/linux/mfd/rohm-bd718x7.h | 13 -
include/linux/mfd/rohm-bd957x.h | 140 ++++
include/linux/mfd/rohm-generic.h | 17 +-
include/linux/mfd/twl.h | 2 -
include/linux/platform_data/i2c-designware.h | 13 -
include/linux/regulator/driver.h | 7 +
.../soc/codecs/arizona-jack.c | 63 +-
109 files changed, 6467 insertions(+), 2508 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml
delete mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
create mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml
delete mode 100644 Documentation/devicetree/bindings/mfd/rn5t618.txt
create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
create mode 100644 drivers/gpio/gpio-bd71815.c
create mode 100644 drivers/input/misc/atc260x-onkey.c
delete mode 100644 drivers/mfd/ab3100-core.c
delete mode 100644 drivers/mfd/ab3100-otp.c
create mode 100644 drivers/mfd/atc260x-core.c
create mode 100644 drivers/mfd/atc260x-i2c.c
create mode 100644 drivers/mfd/ntxec.c
create mode 100644 drivers/mfd/rohm-bd9576.c
rename {include/linux/mfd/abx500 => drivers/power/supply}/ab8500-bm.h (58%)
rename include/linux/mfd/abx500/ux500_chargalg.h => drivers/power/supply/ab8500-chargalg.h (93%)
create mode 100644 drivers/pwm/pwm-ntxec.c
create mode 100644 drivers/regulator/bd71815-regulator.c
create mode 100644 drivers/rtc/rtc-ntxec.c
create mode 100644 drivers/watchdog/bd9576_wdt.c
delete mode 100644 include/linux/mfd/ab3100.h
create mode 100644 include/linux/mfd/atc260x/atc2603c.h
create mode 100644 include/linux/mfd/atc260x/atc2609a.h
create mode 100644 include/linux/mfd/atc260x/core.h
create mode 100644 include/linux/mfd/ntxec.h
create mode 100644 include/linux/mfd/rohm-bd71815.h
create mode 100644 include/linux/mfd/rohm-bd957x.h
delete mode 100644 include/linux/platform_data/i2c-designware.h
rename drivers/extcon/extcon-arizona.c => sound/soc/codecs/arizona-jack.c (98%)
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists