| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <3150349be99187c4f9290ac35d6227bb6a83519b.1619621413.git.mchehab+huawei@kernel.org>
Date: Wed, 28 Apr 2021 16:51:29 +0200
From: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
To: unlisted-recipients:; (no To-header on input)
Cc: linuxarm@...wei.com, mauro.chehab@...wei.com,
Mauro Carvalho Chehab <mchehab+huawei@...nel.org>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Eugen Hristev <eugen.hristev@...rochip.com>,
Ludovic Desroches <ludovic.desroches@...rochip.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-media@...r.kernel.org
Subject: [PATCH v4 08/79] media: atmel: properly get pm_runtime
There are several issues in the way the atmel driver handles
pm_runtime_get_sync():
- it doesn't check return codes;
- it doesn't properly decrement the usage_count on all places;
- it starts streaming even if pm_runtime_get_sync() fails.
- while it tries to get pm_runtime at the clock enable logic,
it doesn't check if the operation was suceeded.
Replace all occurrences of it to use the new kAPI:
pm_runtime_resume_and_get(), which ensures that, if the
return code is not negative, the usage_count was incremented.
With that, add additional checks when this is called, in order
to ensure that errors will be properly addressed.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
---
drivers/media/platform/atmel/atmel-isc-base.c | 27 ++++++++++++++-----
drivers/media/platform/atmel/atmel-isi.c | 19 ++++++++++---
2 files changed, 35 insertions(+), 11 deletions(-)
diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
index fe3ec8d0eaee..02543fe42e9d 100644
--- a/drivers/media/platform/atmel/atmel-isc-base.c
+++ b/drivers/media/platform/atmel/atmel-isc-base.c
@@ -294,9 +294,13 @@ static int isc_wait_clk_stable(struct clk_hw *hw)
static int isc_clk_prepare(struct clk_hw *hw)
{
struct isc_clk *isc_clk = to_isc_clk(hw);
+ int ret;
- if (isc_clk->id == ISC_ISPCK)
- pm_runtime_get_sync(isc_clk->dev);
+ if (isc_clk->id == ISC_ISPCK) {
+ ret = pm_runtime_resume_and_get(isc_clk->dev);
+ if (ret < 0)
+ return 0;
+ }
return isc_wait_clk_stable(hw);
}
@@ -353,9 +357,13 @@ static int isc_clk_is_enabled(struct clk_hw *hw)
{
struct isc_clk *isc_clk = to_isc_clk(hw);
u32 status;
+ int ret;
- if (isc_clk->id == ISC_ISPCK)
- pm_runtime_get_sync(isc_clk->dev);
+ if (isc_clk->id == ISC_ISPCK) {
+ ret = pm_runtime_resume_and_get(isc_clk->dev);
+ if (ret < 0)
+ return 0;
+ }
regmap_read(isc_clk->regmap, ISC_CLKSR, &status);
@@ -807,7 +815,9 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count)
goto err_start_stream;
}
- pm_runtime_get_sync(isc->dev);
+ ret = pm_runtime_resume_and_get(isc->dev);
+ if (ret < 0)
+ goto err_pm_get;
ret = isc_configure(isc);
if (unlikely(ret))
@@ -838,7 +848,7 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count)
err_configure:
pm_runtime_put_sync(isc->dev);
-
+err_pm_get:
v4l2_subdev_call(isc->current_subdev->sd, video, s_stream, 0);
err_start_stream:
@@ -1809,6 +1819,7 @@ static void isc_awb_work(struct work_struct *w)
u32 baysel;
unsigned long flags;
u32 min, max;
+ int ret;
/* streaming is not active anymore */
if (isc->stop)
@@ -1831,7 +1842,9 @@ static void isc_awb_work(struct work_struct *w)
ctrls->hist_id = hist_id;
baysel = isc->config.sd_format->cfa_baycfg << ISC_HIS_CFG_BAYSEL_SHIFT;
- pm_runtime_get_sync(isc->dev);
+ ret = pm_runtime_resume_and_get(isc->dev);
+ if (ret < 0)
+ return;
/*
* only update if we have all the required histograms and controls
diff --git a/drivers/media/platform/atmel/atmel-isi.c b/drivers/media/platform/atmel/atmel-isi.c
index 0514be6153df..6a433926726d 100644
--- a/drivers/media/platform/atmel/atmel-isi.c
+++ b/drivers/media/platform/atmel/atmel-isi.c
@@ -422,7 +422,9 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count)
struct frame_buffer *buf, *node;
int ret;
- pm_runtime_get_sync(isi->dev);
+ ret = pm_runtime_resume_and_get(isi->dev);
+ if (ret < 0)
+ return ret;
/* Enable stream on the sub device */
ret = v4l2_subdev_call(isi->entity.subdev, video, s_stream, 1);
@@ -782,9 +784,10 @@ static int isi_enum_frameintervals(struct file *file, void *fh,
return 0;
}
-static void isi_camera_set_bus_param(struct atmel_isi *isi)
+static int isi_camera_set_bus_param(struct atmel_isi *isi)
{
u32 cfg1 = 0;
+ int ret;
/* set bus param for ISI */
if (isi->pdata.hsync_act_low)
@@ -801,12 +804,16 @@ static void isi_camera_set_bus_param(struct atmel_isi *isi)
cfg1 |= ISI_CFG1_THMASK_BEATS_16;
/* Enable PM and peripheral clock before operate isi registers */
- pm_runtime_get_sync(isi->dev);
+ ret = pm_runtime_resume_and_get(isi->dev);
+ if (ret < 0)
+ return ret;
isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
isi_writel(isi, ISI_CFG1, cfg1);
pm_runtime_put(isi->dev);
+
+ return 0;
}
/* -----------------------------------------------------------------------*/
@@ -1085,7 +1092,11 @@ static int isi_graph_notify_complete(struct v4l2_async_notifier *notifier)
dev_err(isi->dev, "No supported mediabus format found\n");
return ret;
}
- isi_camera_set_bus_param(isi);
+ ret = isi_camera_set_bus_param(isi);
+ if (ret) {
+ dev_err(isi->dev, "Can't wake up device\n");
+ return ret;
+ }
ret = isi_set_default_fmt(isi);
if (ret) {
--
2.30.2
Powered by blists - more mailing lists