| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210428153542.2814175-32-Liam.Howlett@Oracle.com>
Date: Wed, 28 Apr 2021 15:36:05 +0000
From: Liam Howlett <liam.howlett@...cle.com>
To: "maple-tree@...ts.infradead.org" <maple-tree@...ts.infradead.org>,
"linux-mm@...ck.org" <linux-mm@...ck.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Andrew Morton <akpm@...ux-foundation.org>
CC: Song Liu <songliubraving@...com>,
Davidlohr Bueso <dave@...olabs.net>,
"Paul E . McKenney" <paulmck@...nel.org>,
Matthew Wilcox <willy@...radead.org>,
Laurent Dufour <ldufour@...ux.ibm.com>,
David Rientjes <rientjes@...gle.com>,
Axel Rasmussen <axelrasmussen@...gle.com>,
Suren Baghdasaryan <surenb@...gle.com>,
Vlastimil Babka <vbabka@...e.cz>,
Rik van Riel <riel@...riel.com>,
Peter Zijlstra <peterz@...radead.org>,
Michel Lespinasse <walken.cr@...il.com>,
Liam Howlett <liam.howlett@...cle.com>
Subject: [PATCH 31/94] mm/mmap: Change unmapped_area and unmapped_area_topdown
to use maple tree
Use the new maple tree data structure to find an unmapped area.
Signed-off-by: Liam R. Howlett <Liam.Howlett@...cle.com>
---
mm/mmap.c | 263 +++++++-----------------------------------------------
1 file changed, 32 insertions(+), 231 deletions(-)
diff --git a/mm/mmap.c b/mm/mmap.c
index 0fc81b02935f..929c2f9eb3f5 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2049,260 +2049,61 @@ unsigned long mmap_region(struct file *file, unsigned long addr,
return error;
}
+/* unmapped_area() Find an area between the low_limit and the high_limit with
+ * the correct alignment and offset, all from @info. Note: current->mm is used
+ * for the search.
+ *
+ * @info: The unmapped area information including the range (low_limit -
+ * hight_limit), the alignment offset and mask.
+ *
+ * Return: A memory address or -ENOMEM.
+ */
static unsigned long unmapped_area(struct vm_unmapped_area_info *info)
{
- /*
- * We implement the search by looking for an rbtree node that
- * immediately follows a suitable gap. That is,
- * - gap_start = vma->vm_prev->vm_end <= info->high_limit - length;
- * - gap_end = vma->vm_start >= info->low_limit + length;
- * - gap_end - gap_start >= length
- */
+ unsigned long length, gap;
- struct mm_struct *mm = current->mm;
- struct vm_area_struct *vma;
- unsigned long length, low_limit, high_limit, gap_start, gap_end;
- unsigned long gap;
- MA_STATE(mas, &mm->mm_mt, 0, 0);
+ MA_STATE(mas, ¤t->mm->mm_mt, 0, 0);
/* Adjust search length to account for worst case alignment overhead */
length = info->length + info->align_mask;
if (length < info->length)
return -ENOMEM;
- rcu_read_lock();
- mas_empty_area_rev(&mas, info->low_limit, info->high_limit - 1,
- length);
- rcu_read_unlock();
- gap = mas.index;
- gap += (info->align_offset - gap) & info->align_mask;
-
- /* Adjust search limits by the desired length */
- if (info->high_limit < length)
- return -ENOMEM;
- high_limit = info->high_limit - length;
-
- if (info->low_limit > high_limit)
+ if (mas_empty_area(&mas, info->low_limit, info->high_limit - 1,
+ length)) {
return -ENOMEM;
- low_limit = info->low_limit + length;
-
- /* Check if rbtree root looks promising */
- if (RB_EMPTY_ROOT(&mm->mm_rb))
- goto check_highest;
- vma = rb_entry(mm->mm_rb.rb_node, struct vm_area_struct, vm_rb);
- if (vma->rb_subtree_gap < length)
- goto check_highest;
-
- while (true) {
- /* Visit left subtree if it looks promising */
- gap_end = vm_start_gap(vma);
- if (gap_end >= low_limit && vma->vm_rb.rb_left) {
- struct vm_area_struct *left =
- rb_entry(vma->vm_rb.rb_left,
- struct vm_area_struct, vm_rb);
- if (left->rb_subtree_gap >= length) {
- vma = left;
- continue;
- }
- }
-
- gap_start = vma->vm_prev ? vm_end_gap(vma->vm_prev) : 0;
-check_current:
- /* Check if current node has a suitable gap */
- if (gap_start > high_limit)
- return -ENOMEM;
- if (gap_end >= low_limit &&
- gap_end > gap_start && gap_end - gap_start >= length)
- goto found;
-
- /* Visit right subtree if it looks promising */
- if (vma->vm_rb.rb_right) {
- struct vm_area_struct *right =
- rb_entry(vma->vm_rb.rb_right,
- struct vm_area_struct, vm_rb);
- if (right->rb_subtree_gap >= length) {
- vma = right;
- continue;
- }
- }
-
- /* Go back up the rbtree to find next candidate node */
- while (true) {
- struct rb_node *prev = &vma->vm_rb;
- if (!rb_parent(prev))
- goto check_highest;
- vma = rb_entry(rb_parent(prev),
- struct vm_area_struct, vm_rb);
- if (prev == vma->vm_rb.rb_left) {
- gap_start = vm_end_gap(vma->vm_prev);
- gap_end = vm_start_gap(vma);
- goto check_current;
- }
- }
}
-
-check_highest:
- /* Check highest gap, which does not precede any rbtree node */
- gap_start = mm->highest_vm_end;
- gap_end = ULONG_MAX; /* Only for VM_BUG_ON below */
- if (gap_start > high_limit)
- return -ENOMEM;
-
-found:
- /* We found a suitable gap. Clip it with the original low_limit. */
- if (gap_start < info->low_limit)
- gap_start = info->low_limit;
-
- /* Adjust gap address to the desired alignment */
- gap_start += (info->align_offset - gap_start) & info->align_mask;
-
- VM_BUG_ON(gap_start + info->length > info->high_limit);
- VM_BUG_ON(gap_start + info->length > gap_end);
-
- VM_BUG_ON(gap != gap_start);
- return gap_start;
-}
-
-static inline unsigned long top_area_aligned(struct vm_unmapped_area_info *info,
- unsigned long end)
-{
- return (end - info->length - info->align_offset) & (~info->align_mask);
+ gap = mas.index;
+ gap += (info->align_offset - gap) & info->align_mask;
+ return gap;
}
+/* unmapped_area_topdown() Find an area between the low_limit and the
+ * high_limit with * the correct alignment and offset at the highest available
+ * address, all from * @info. Note: current->mm is used for the search.
+ *
+ * @info: The unmapped area information including the range (low_limit -
+ * hight_limit), the alignment offset and mask.
+ *
+ * Return: A memory address or -ENOMEM.
+ */
static unsigned long unmapped_area_topdown(struct vm_unmapped_area_info *info)
{
- struct mm_struct *mm = current->mm;
- struct vm_area_struct *vma = NULL;
- unsigned long length, low_limit, high_limit, gap_start, gap_end;
- unsigned long gap;
-
- MA_STATE(mas, &mm->mm_mt, 0, 0);
- validate_mm_mt(mm);
+ unsigned long length, gap;
+ MA_STATE(mas, ¤t->mm->mm_mt, 0, 0);
/* Adjust search length to account for worst case alignment overhead */
length = info->length + info->align_mask;
if (length < info->length)
return -ENOMEM;
- rcu_read_lock();
- mas_empty_area_rev(&mas, info->low_limit, info->high_limit - 1,
- length);
- rcu_read_unlock();
- gap = (mas.index + info->align_mask) & ~info->align_mask;
- gap -= info->align_offset & info->align_mask;
-
- /*
- * Adjust search limits by the desired length.
- * See implementation comment at top of unmapped_area().
- */
- gap_end = info->high_limit;
- if (gap_end < length)
+ if (mas_empty_area_rev(&mas, info->low_limit, info->high_limit - 1,
+ length)) {
return -ENOMEM;
- high_limit = gap_end - length;
-
- if (info->low_limit > high_limit)
- return -ENOMEM;
- low_limit = info->low_limit + length;
-
- /* Check highest gap, which does not precede any rbtree node */
- gap_start = mm->highest_vm_end;
- if (gap_start <= high_limit)
- goto found_highest;
-
- /* Check if rbtree root looks promising */
- if (RB_EMPTY_ROOT(&mm->mm_rb))
- return -ENOMEM;
- vma = rb_entry(mm->mm_rb.rb_node, struct vm_area_struct, vm_rb);
- if (vma->rb_subtree_gap < length)
- return -ENOMEM;
-
- while (true) {
- /* Visit right subtree if it looks promising */
- gap_start = vma->vm_prev ? vm_end_gap(vma->vm_prev) : 0;
- if (gap_start <= high_limit && vma->vm_rb.rb_right) {
- struct vm_area_struct *right =
- rb_entry(vma->vm_rb.rb_right,
- struct vm_area_struct, vm_rb);
- if (right->rb_subtree_gap >= length) {
- vma = right;
- continue;
- }
- }
-
-check_current:
- /* Check if current node has a suitable gap */
- gap_end = vm_start_gap(vma);
- if (gap_end < low_limit)
- return -ENOMEM;
- if (gap_start <= high_limit &&
- gap_end > gap_start && gap_end - gap_start >= length)
- goto found;
-
- /* Visit left subtree if it looks promising */
- if (vma->vm_rb.rb_left) {
- struct vm_area_struct *left =
- rb_entry(vma->vm_rb.rb_left,
- struct vm_area_struct, vm_rb);
- if (left->rb_subtree_gap >= length) {
- vma = left;
- continue;
- }
- }
-
- /* Go back up the rbtree to find next candidate node */
- while (true) {
- struct rb_node *prev = &vma->vm_rb;
- if (!rb_parent(prev))
- return -ENOMEM;
- vma = rb_entry(rb_parent(prev),
- struct vm_area_struct, vm_rb);
- if (prev == vma->vm_rb.rb_right) {
- gap_start = vma->vm_prev ?
- vm_end_gap(vma->vm_prev) : 0;
- goto check_current;
- }
- }
}
-
-found:
- /* We found a suitable gap. Clip it with the original high_limit. */
- if (gap_end > info->high_limit)
- gap_end = info->high_limit;
-
-found_highest:
- /* Compute highest gap address at the desired alignment */
- gap_end -= info->length;
- gap_end -= (gap_end - info->align_offset) & info->align_mask;
-
- VM_BUG_ON(gap_end < info->low_limit);
- VM_BUG_ON(gap_end < gap_start);
-
- if (gap != gap_end) {
- pr_err("%s: %px Gap was found: mt %lu gap_end %lu\n", __func__,
- mm, gap, gap_end);
- pr_err("window was %lu - %lu size %lu\n", info->high_limit,
- info->low_limit, length);
- pr_err("mas.min %lu max %lu mas.last %lu\n", mas.min, mas.max,
- mas.last);
- pr_err("mas.index %lu align mask %lu offset %lu\n", mas.index,
- info->align_mask, info->align_offset);
- pr_err("rb_find_vma find on %lu => %px (%px)\n", mas.index,
- find_vma(mm, mas.index), vma);
-#if defined(CONFIG_DEBUG_MAPLE_TREE)
- mt_dump(&mm->mm_mt);
-#endif
- {
- struct vm_area_struct *dv = mm->mmap;
-
- while (dv) {
- printk("vma %px %lu-%lu\n", dv, dv->vm_start, dv->vm_end);
- dv = dv->vm_next;
- }
- }
- VM_BUG_ON(gap != gap_end);
- }
-
- return gap_end;
+ gap = (mas.index + info->align_mask) & ~info->align_mask;
+ gap -= info->align_offset & info->align_mask;
+ return gap;
}
/*
--
2.30.2
Powered by blists - more mailing lists