linux-kernel - TGL: : No video output on external monitor after unplug and re-plug the cable

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-ID: <CABTNMG1TRbAW+ULs9Ss27owvxppf-dA=F7M0vGp1EtHwDcK51w@mail.gmail.com>
Date:   Thu, 29 Apr 2021 12:46:58 +0800
From:   Chris Chiu <chris.chiu@...onical.com>
To:     imre.deak@...el.com, jani.nikula@...ux.intel.com,
        joonas.lahtinen@...ux.intel.com, rodrigo.vivi@...el.com,
        intel-gfx@...ts.freedesktop.org, dri-devel@...ts.freedesktop.org,
        Linux Kernel <linux-kernel@...r.kernel.org>
Subject: TGL: : No video output on external monitor after unplug and re-plug
 the cable

We found another bug after the fix of
https://gitlab.freedesktop.org/drm/intel/-/issues/2538. The external
monitor is also connected via WD19's HDMI/DisplayPort just as #2538.
However, the display monitor can only be detected and show output at
the very first time we power on the WD19 dock. If we unplug the cable
and replug again, the monitor seems to be detected but there's no
video output.

When we power on the WD19 dock with cable connected to the monitor,
the drm kernel log shows as follows

 i915 0000:00:02.0: [drm:intel_get_hpd_pins.isra.0 [i915]] hotplug
event received, stat 0x00010000, dig 0x0088888a, pins 0x00000200, long
0x00000200
 i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on
[ENCODER:292:DDI D] - long
 i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD
interrupt on PIN 9 - cnt: 10
 i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on
[ENCODER:292:DDI D] - long
 i915 0000:00:02.0: [drm:i915_hotplug_work_func [i915]] running
encoder hotplug functions
 i915 0000:00:02.0: [drm:i915_hotplug_work_func [i915]] Connector DP-1
(pin 9) received hotplug event. (retry 0)
 i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:293:DP-1]
 i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC cold off
 i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded
 i915 0000:00:02.0: [drm:__intel_tc_port_lock [i915]] Port D/TC#1: TC
port mode reset (tbt-alt -> dp-alt)
 i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX D TC1
 i915 0000:00:02.0: [drm:drm_dp_dpcd_read [drm_kms_helper]] AUX D/port
D: 0xf0000 AUX -> (ret=  8) 14 1e 40 55 02 00 00 00
 i915 0000:00:02.0: [drm:intel_dp_lttpr_init [i915]] LTTPR common
capabilities: 14 1e 40 55 02 00 00 00

Then I replug the cable, the intel_power_well_enable() in
intel_dp_aux_xfer() shows "enabling DC off" power domain instead of
enabling AUX D TC1. After that, the flooded i915 0000:00:02.0:
[drm:intel_dp_aux_xfer [i915]] AUX D/port D: timeout (status
0x7d4003ff) keeps show up and no video output.

I filed a bug on
https://gitlab.freedesktop.org/drm/intel/-/issues/3407 and also
uploaded the journal log  with kernel boot parameter
"drm.debug=0x10e".

Can anyone suggest what happens at the replug? What can we do to
identify the cause? Thanks

Chris