| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <MWHPR02MB262375C50CF76F70F88BB2B6C25F9@MWHPR02MB2623.namprd02.prod.outlook.com>
Date: Thu, 29 Apr 2021 06:23:59 +0000
From: Nava kishore Manne <navam@...inx.com>
To: Greg KH <gregkh@...uxfoundation.org>
CC: "robh+dt@...nel.org" <robh+dt@...nel.org>,
Michal Simek <michals@...inx.com>,
Derek Kiernan <dkiernan@...inx.com>,
Dragan Cvetic <draganc@...inx.com>,
"arnd@...db.de" <arnd@...db.de>, Rajan Vaja <RAJANV@...inx.com>,
Jolly Shah <JOLLYS@...inx.com>,
Tejas Patel <tejasp@...x.xilinx.com>,
Amit Sunil Dhamne <amitsuni@...x.xilinx.com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"chinnikishore369@...il.com" <chinnikishore369@...il.com>,
git <git@...inx.com>, Moritz Fischer <mdf@...nel.org>
Subject: RE: [PATCH 2/5] misc: zynq: Add afi config driver
Hi Greg,
Please find my response inline.
> -----Original Message-----
> From: Greg KH <gregkh@...uxfoundation.org>
> Sent: Tuesday, April 20, 2021 8:57 PM
> To: Nava kishore Manne <navam@...inx.com>
> Cc: robh+dt@...nel.org; Michal Simek <michals@...inx.com>; Derek Kiernan
> <dkiernan@...inx.com>; Dragan Cvetic <draganc@...inx.com>;
> arnd@...db.de; Rajan Vaja <RAJANV@...inx.com>; Jolly Shah
> <JOLLYS@...inx.com>; Tejas Patel <tejasp@...x.xilinx.com>; Amit Sunil
> Dhamne <amitsuni@...inx.com>; devicetree@...r.kernel.org; linux-arm-
> kernel@...ts.infradead.org; linux-kernel@...r.kernel.org;
> chinnikishore369@...il.com; git <git@...inx.com>
> Subject: Re: [PATCH 2/5] misc: zynq: Add afi config driver
>
> On Tue, Apr 20, 2021 at 01:36:51PM +0000, Nava kishore Manne wrote:
> > Hi Greg,
> >
> > Please find my response inline.
> >
> > > -----Original Message-----
> > > From: Greg KH <gregkh@...uxfoundation.org>
> > > Sent: Tuesday, April 20, 2021 2:17 PM
> > > To: Nava kishore Manne <navam@...inx.com>
> > > Cc: robh+dt@...nel.org; Michal Simek <michals@...inx.com>; Derek
> > > Kiernan <dkiernan@...inx.com>; Dragan Cvetic <draganc@...inx.com>;
> > > arnd@...db.de; Rajan Vaja <RAJANV@...inx.com>; Jolly Shah
> > > <JOLLYS@...inx.com>; Tejas Patel <tejasp@...x.xilinx.com>; Amit
> > > Sunil Dhamne <amitsuni@...inx.com>; devicetree@...r.kernel.org;
> > > linux-arm- kernel@...ts.infradead.org; linux-kernel@...r.kernel.org;
> > > chinnikishore369@...il.com; git <git@...inx.com>
> > > Subject: Re: [PATCH 2/5] misc: zynq: Add afi config driver
> > >
> > > On Tue, Apr 20, 2021 at 01:41:50PM +0530, Nava kishore Manne wrote:
> > > > This patch adds zynq afi config driver. This is useful for the
> > > > configuration of the PS-PL interface on zynq platform.
> > >
> > > What is "PS-PL"? Can you describe it better please?
> > >
> > PS-PL interface is nothing but the interface between processing system(PS)
> that contains arm cores and Programmable Logic(PL) i.e FPGA.
> > Will update the description in v2.
> >
> > > >
> > > > Signed-off-by: Nava kishore Manne <nava.manne@...inx.com>
> > > > ---
> > > > drivers/misc/Kconfig | 11 ++++++
> > > > drivers/misc/Makefile | 1 +
> > > > drivers/misc/zynq-afi.c | 81
> > > > +++++++++++++++++++++++++++++++++++++++++
> > > > 3 files changed, 93 insertions(+) create mode 100644
> > > > drivers/misc/zynq-afi.c
> > > >
> > > > diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index
> > > > f532c59bb59b..877b43b3377d 100644
> > > > --- a/drivers/misc/Kconfig
> > > > +++ b/drivers/misc/Kconfig
> > > > @@ -445,6 +445,17 @@ config HISI_HIKEY_USB
> > > > switching between the dual-role USB-C port and the USB-A host
> > > ports
> > > > using only one USB controller.
> > > >
> > > > +config ZYNQ_AFI
> > > > + tristate "Xilinx ZYNQ AFI support"
> > > > + help
> > > > + Zynq AFI driver support for writing to the AFI registers
> > > > + for configuring PS_PL Bus-width. Xilinx Zynq SoC connect
> > > > + the PS to the programmable logic (PL) through the AXI port.
> > > > + This AXI port helps to establish the data path between the
> > > > + PS and PL.In-order to establish the proper communication path
> > > > + between PS and PL, the AXI port data path should be configured
> > > > + with the proper Bus-width values
> > > > +
> > > > source "drivers/misc/c2port/Kconfig"
> > > > source "drivers/misc/eeprom/Kconfig"
> > > > source "drivers/misc/cb710/Kconfig"
> > > > diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index
> > > > 99b6f15a3c70..e9b03843100f 100644
> > > > --- a/drivers/misc/Makefile
> > > > +++ b/drivers/misc/Makefile
> > > > @@ -56,3 +56,4 @@ obj-$(CONFIG_HABANA_AI) +=
> > > habanalabs/
> > > > obj-$(CONFIG_UACCE) += uacce/
> > > > obj-$(CONFIG_XILINX_SDFEC) += xilinx_sdfec.o
> > > > obj-$(CONFIG_HISI_HIKEY_USB) += hisi_hikey_usb.o
> > > > +obj-$(CONFIG_ZYNQ_AFI) += zynq-afi.o
> > > > diff --git a/drivers/misc/zynq-afi.c b/drivers/misc/zynq-afi.c new
> > > > file mode 100644 index 000000000000..04317d1bdb98
> > > > --- /dev/null
> > > > +++ b/drivers/misc/zynq-afi.c
> > > > @@ -0,0 +1,81 @@
> > > > +// SPDX-License-Identifier: GPL-2.0
> > > > +/*
> > > > + * Xilinx ZYNQ AFI driver.
> > > > + * Copyright (c) 2018-2021 Xilinx Inc.
> > > > + */
> > > > +
> > > > +#include <linux/err.h>
> > > > +#include <linux/io.h>
> > > > +#include <linux/module.h>
> > > > +#include <linux/of.h>
> > > > +#include <linux/platform_device.h>
> > > > +
> > > > +/* Registers and special values for doing register-based operations */
> > > > +#define AFI_RDCHAN_CTRL_OFFSET 0x00
> > > > +#define AFI_WRCHAN_CTRL_OFFSET 0x14
> > > > +
> > > > +#define AFI_BUSWIDTH_MASK 0x01
> > > > +
> > > > +/**
> > > > + * struct afi_fpga - AFI register description
> > > > + * @membase: pointer to register struct
> > > > + * @afi_width: AFI bus width to be written
> > > > + */
> > > > +struct zynq_afi_fpga {
> > > > + void __iomem *membase;
> > > > + u32 afi_width;
> > > > +};
> > > > +
> > > > +static int zynq_afi_fpga_probe(struct platform_device *pdev) {
> > > > + struct zynq_afi_fpga *afi_fpga;
> > > > + struct resource *res;
> > > > + u32 reg_val;
> > > > + u32 val;
> > > > +
> > > > + afi_fpga = devm_kzalloc(&pdev->dev, sizeof(*afi_fpga),
> > > GFP_KERNEL);
> > > > + if (!afi_fpga)
> > > > + return -ENOMEM;
> > > > +
> > > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > > > + afi_fpga->membase = devm_ioremap_resource(&pdev->dev, res);
> > > > + if (IS_ERR(afi_fpga->membase))
> > > > + return PTR_ERR(afi_fpga->membase);
> > > > +
> > > > + val = device_property_read_u32(&pdev->dev, "xlnx,afi-width",
> > > > + &afi_fpga->afi_width);
> > > > + if (val) {
> > > > + dev_err(&pdev->dev, "failed to get the afi bus width\n");
> > > > + return -EINVAL;
> > > > + }
> > > > +
> > > > + reg_val = readl(afi_fpga->membase + AFI_RDCHAN_CTRL_OFFSET);
> > > > + reg_val &= ~AFI_BUSWIDTH_MASK;
> > > > + writel(reg_val | afi_fpga->afi_width,
> > > > + afi_fpga->membase + AFI_RDCHAN_CTRL_OFFSET);
> > > > + reg_val = readl(afi_fpga->membase + AFI_WRCHAN_CTRL_OFFSET);
> > > > + reg_val &= ~AFI_BUSWIDTH_MASK;
> > > > + writel(reg_val | afi_fpga->afi_width,
> > > > + afi_fpga->membase + AFI_WRCHAN_CTRL_OFFSET);
> > > > +
> > > > + return 0;
> > > > +}
> > >
> > > I do not understand, why is this driver needed at all? Why can't
> > > you do the above from userspace?
> > >
> > > All this does is write some values to the hardware at probe time,
> > > who needs this?
> >
> > This driver will be used by the overlay framework for configuring the
> interface after programming the FPGA and before probing the drivers that
> are present in the PL.
>
> What is a "overlay framework"? And why does the kernel have to do this?
> Why can't you write these hardware values from userspace?
>
> confused,
>
The Zynq based processing system (PS) that contains ARM cores and Xilinx programmable logic (PL/FPGA) in a single device. The PS and PL can be tightly or loosely coupled using multiple interfaces and other signals.
This enables the designer to effectively integrate user-created hardware accelerators and other functions in the PL logic that are accessible to the processors and can also access memory resources in the PS.
https://www.xilinx.com/support/documentation/user_guides/ug585-Zynq-7000-TRM.pdf (Page No: 41)
To Program/Re-Program the PL at runtime in Linux we have a an FPGA Manger Framework and this frame work uses DT-Overlays to programming the FPGA and probing the relevant PL drivers.
For more info please refer this link: https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bindings/fpga/fpga-region.txt
Every Zynq/ZynqMP PL(FPGA) design has its own PS-PL configuration. So after programming the FPGA and before probing the relevant PL drivers these PS-PL configurations should be set.
Example DT-Overlay file to program the PL(FPGA) from Linux:
/dts-v1/;
/plugin/;
/ {
fragment@0 { /* fragment 0 contains Bitstream info */
target = <&fpga_full>;
overlay0: __overlay__ {
#address-cells = <2>;
#size-cells = <2>;
firmware-name = "Base_Zynq_MPSoC_wrapper.bit.bin";
resets = <&zynqmp_reset 116>;
};
};
fragment@1 { /* fragment 1 contains PS-PL configurations */
target = <&amba>;
overlay1: __overlay__ {
afi0: afi@...08000 {
#address-cells = <0x1>;
#size-cells = <0x0>;
compatible = "xlnx,zynq-afi-fpga";
reg = <0xf8008000 0x24>;
xlnx,afi-width = <0x1>;
};
};
};
fragment@2 { /* Fragment 2 contains the relevant drivers for the IP's present in the FPGA design*/
target = <&amba>;
overlay2: __overlay__ {
axi_gpio_0: gpio@...00000 {
#gpio-cells = <2>;
clock-names = "s_axi_aclk";
clocks = <&zynqmp_clk 71>;
compatible = "xlnx,xps-gpio-1.00.a";
gpio-controller ;
reg = <0x0 0xa0000000 0x0 0x1000>;
};
};
} ;
};
In-order to support the PL(FPGA) programming and to configure the interface between PS and PL using FPGA Manager. This Driver is needed in the kernel space.
@Moritz Fischer: Can you please let us know your thoughts on this.
Regards,
Navakishore.
Powered by blists - more mailing lists