linux-kernel - [PATCH 09/16] soc: imx: gpcv2: add support for optional resets

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210429073050.21039-10-peng.fan@oss.nxp.com>
Date:   Thu, 29 Apr 2021 15:30:43 +0800
From:   "Peng Fan (OSS)" <peng.fan@....nxp.com>
To:     robh+dt@...nel.org, shawnguo@...nel.org, s.hauer@...gutronix.de
Cc:     kernel@...gutronix.de, festevam@...il.com, linux-imx@....com,
        p.zabel@...gutronix.de, l.stach@...gutronix.de, krzk@...nel.org,
        agx@...xcpu.org, marex@...x.de, andrew.smirnov@...il.com,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, ping.bai@....com,
        frieder.schrempf@...tron.de, aford173@...il.com, abel.vesa@....com
Subject: [PATCH 09/16] soc: imx: gpcv2: add support for optional resets

From: Lucas Stach <l.stach@...gutronix.de>

Normally the reset for the devices inside the power domain is
triggered automatically from the PGC in the power-up sequencing,
however on i.MX8MM this doesn't work for the GPU power domains.

Add support for triggering the reset explicitly during the power
up sequencing.

Signed-off-by: Lucas Stach <l.stach@...gutronix.de>
---
 drivers/soc/imx/gpcv2.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index 640f4165cfba..4a2c2a255d1a 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -15,6 +15,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
+#include <linux/reset.h>
 #include <linux/sizes.h>
 #include <dt-bindings/power/imx7-power.h>
 #include <dt-bindings/power/imx8mq-power.h>
@@ -108,6 +109,7 @@ struct imx_pgc_domain {
 	struct generic_pm_domain genpd;
 	struct regmap *regmap;
 	struct regulator *regulator;
+	struct reset_control *reset;
 	struct clk_bulk_data *clks;
 	int num_clks;
 
@@ -163,6 +165,8 @@ static int imx_pgc_power_up(struct generic_pm_domain *genpd)
 		goto out_regulator_disable;
 	}
 
+	reset_control_assert(domain->reset);
+
 	if (domain->bits.pxx) {
 		/* request the domain to power up */
 		regmap_update_bits(domain->regmap, GPC_PU_PGC_SW_PUP_REQ,
@@ -185,6 +189,11 @@ static int imx_pgc_power_up(struct generic_pm_domain *genpd)
 				   GPC_PGC_CTRL_PCR, 0);
 	}
 
+	/* delay for reset to propagate */
+	udelay(5);
+
+	reset_control_deassert(domain->reset);
+
 	/* request the ADB400 to power up */
 	if (domain->bits.hskreq) {
 		regmap_update_bits(domain->regmap, GPC_PU_PWRHSK,
@@ -531,11 +540,17 @@ static int imx_pgc_domain_probe(struct platform_device *pdev)
 				      domain->voltage, domain->voltage);
 	}
 
+
 	domain->num_clks = devm_clk_bulk_get_all(domain->dev, &domain->clks);
 	if (domain->num_clks < 0)
 		return dev_err_probe(domain->dev, domain->num_clks,
 				     "Failed to get domain's clocks\n");
 
+	domain->reset = devm_reset_control_array_get_optional_exclusive(domain->dev);
+	if (IS_ERR(domain->reset))
+		return dev_err_probe(domain->dev, PTR_ERR(domain->reset),
+				     "Failed to get domain's resets\n");
+
 	pm_runtime_enable(domain->dev);
 
 	if (domain->bits.map)
-- 
2.30.0