[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <cd88adf8-8d85-0a7a-6a5d-fd1d616a35ae@oss.nxp.com>
Date: Fri, 30 Apr 2021 12:52:33 +0800
From: "Peng Fan (OSS)" <peng.fan@....nxp.com>
To: Lucas Stach <l.stach@...gutronix.de>, robh+dt@...nel.org,
shawnguo@...nel.org, s.hauer@...gutronix.de
Cc: kernel@...gutronix.de, festevam@...il.com, linux-imx@....com,
p.zabel@...gutronix.de, krzk@...nel.org, agx@...xcpu.org,
marex@...x.de, andrew.smirnov@...il.com,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, ping.bai@....com,
frieder.schrempf@...tron.de, aford173@...il.com, abel.vesa@....com,
Peng Fan <peng.fan@....com>
Subject: Re: [PATCH 16/16] soc: imx: gpcv2: remove waiting handshake in power
up
On 2021/4/29 22:34, Lucas Stach wrote:
> Am Donnerstag, dem 29.04.2021 um 15:30 +0800 schrieb Peng Fan (OSS):
>> From: Peng Fan <peng.fan@....com>
>>
>> i.MX8MM has blk ctl module, the handshake can only finish after setting
>> blk ctl. The blk ctl driver will set the bus clk bit and the handshake
>> will finish there. we just add a delay and suppose the handshake will
>> finish after that.
>
> Instead of this patch, just drop patch 05/16 from this series. I think
> we should leave a comment in the code on why we aren't waiting for the
> handshake ack, as this is non-obvious from looking at the driver code.
>
> Basically add a polished version of the commit log from this patch into
> the driver code.
I see. Will do it in V2.
Thanks,
Peng.
>
> Regards,
> Lucas
>
>> Signed-off-by: Peng Fan <peng.fan@....com>
>> ---
>> drivers/soc/imx/gpcv2.c | 8 --------
>> 1 file changed, 8 deletions(-)
>>
>> diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
>> index 49dd137f6b94..04564017bfe9 100644
>> --- a/drivers/soc/imx/gpcv2.c
>> +++ b/drivers/soc/imx/gpcv2.c
>> @@ -251,14 +251,6 @@ static int imx_pgc_power_up(struct generic_pm_domain *genpd)
>> regmap_update_bits(domain->regmap, GPC_PU_PWRHSK,
>> domain->bits.hskreq, domain->bits.hskreq);
>>
>>
>>
>>
>> - ret = regmap_read_poll_timeout(domain->regmap, GPC_PU_PWRHSK,
>> - reg_val,
>> - (reg_val & domain->bits.hskack),
>> - 0, USEC_PER_MSEC);
>> - if (ret) {
>> - dev_err(domain->dev, "failed to power up ADB400\n");
>> - goto out_clk_disable;
>> - }
>> }
>>
>>
>>
>>
>> /* Disable reset clocks for all devices in the domain */
>
>
Powered by blists - more mailing lists