lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210430045656.577395-1-kai.heng.feng@canonical.com>
Date:   Fri, 30 Apr 2021 12:56:56 +0800
From:   Kai-Heng Feng <kai.heng.feng@...onical.com>
To:     alexander.deucher@....com, christian.koenig@....com
Cc:     Kai-Heng Feng <kai.heng.feng@...onical.com>,
        David Airlie <airlied@...ux.ie>,
        Daniel Vetter <daniel@...ll.ch>,
        amd-gfx@...ts.freedesktop.org (open list:RADEON and AMDGPU DRM DRIVERS),
        dri-devel@...ts.freedesktop.org (open list:DRM DRIVERS),
        linux-kernel@...r.kernel.org (open list)
Subject: [PATCH v2] drm/radeon/dpm: Disable sclk switching on Oland when two 4K 60Hz monitors are connected

Screen flickers rapidly when two 4K 60Hz monitors are in use. This issue
doesn't happen when one monitor is 4K 60Hz (pixelclock 594MHz) and
another one is 4K 30Hz (pixelclock 297MHz).

The issue is gone after setting "power_dpm_force_performance_level" to
"high". Following the indication, we found that the issue occurs when
sclk is too low.

So resolve the issue by disabling sclk switching when there are two
monitors requires high pixelclock (> 297MHz).

v2:
 - Only apply the fix to Oland.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@...onical.com>
---
 drivers/gpu/drm/radeon/radeon.h    | 1 +
 drivers/gpu/drm/radeon/radeon_pm.c | 8 ++++++++
 drivers/gpu/drm/radeon/si_dpm.c    | 3 +++
 3 files changed, 12 insertions(+)

diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 42281fce552e6..56ed5634cebef 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -1549,6 +1549,7 @@ struct radeon_dpm {
 	void                    *priv;
 	u32			new_active_crtcs;
 	int			new_active_crtc_count;
+	int			high_pixelclock_count;
 	u32			current_active_crtcs;
 	int			current_active_crtc_count;
 	bool single_display;
diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index 0c1950f4e146f..3861c0b98fcf3 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -1767,6 +1767,7 @@ static void radeon_pm_compute_clocks_dpm(struct radeon_device *rdev)
 	struct drm_device *ddev = rdev->ddev;
 	struct drm_crtc *crtc;
 	struct radeon_crtc *radeon_crtc;
+	struct radeon_connector *radeon_connector;
 
 	if (!rdev->pm.dpm_enabled)
 		return;
@@ -1776,6 +1777,7 @@ static void radeon_pm_compute_clocks_dpm(struct radeon_device *rdev)
 	/* update active crtc counts */
 	rdev->pm.dpm.new_active_crtcs = 0;
 	rdev->pm.dpm.new_active_crtc_count = 0;
+	rdev->pm.dpm.high_pixelclock_count = 0;
 	if (rdev->num_crtc && rdev->mode_info.mode_config_initialized) {
 		list_for_each_entry(crtc,
 				    &ddev->mode_config.crtc_list, head) {
@@ -1783,6 +1785,12 @@ static void radeon_pm_compute_clocks_dpm(struct radeon_device *rdev)
 			if (crtc->enabled) {
 				rdev->pm.dpm.new_active_crtcs |= (1 << radeon_crtc->crtc_id);
 				rdev->pm.dpm.new_active_crtc_count++;
+				if (!radeon_crtc->connector)
+					continue;
+
+				radeon_connector = to_radeon_connector(radeon_crtc->connector);
+				if (radeon_connector->pixelclock_for_modeset > 297000)
+					rdev->pm.dpm.high_pixelclock_count++;
 			}
 		}
 	}
diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c
index 9186095518047..3cc2b96a7f368 100644
--- a/drivers/gpu/drm/radeon/si_dpm.c
+++ b/drivers/gpu/drm/radeon/si_dpm.c
@@ -2979,6 +2979,9 @@ static void si_apply_state_adjust_rules(struct radeon_device *rdev,
 		    (rdev->pdev->device == 0x6605)) {
 			max_sclk = 75000;
 		}
+
+		if (rdev->pm.dpm.high_pixelclock_count > 1)
+			disable_sclk_switching = true;
 	}
 
 	if (rps->vce_active) {
-- 
2.30.2

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ