linux-kernel - Re: [PATCH v3] Fix FSP-3Y YH-5151E non-compliant vout encoding

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:   Thu, 29 Apr 2021 18:25:22 -0700
From:   Guenter Roeck <linux@...ck-us.net>
To:     Václav Kubernát <kubernat@...net.cz>
Cc:     Jean Delvare <jdelvare@...e.com>, linux-hwmon@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3] Fix FSP-3Y YH-5151E non-compliant vout encoding

On Thu, Apr 29, 2021 at 09:53:38AM +0200, Václav Kubernát wrote:
> I didn't properly test the driver for YH-5151E, so it was completely
> broken. Firstly, the log/real mapping was incorrect in one case.
> Secondly, PMBus specifies that output voltages should be in the linear16
> encoding. However, the YH-5151E is non-compliant and uses linear11.
> YM-2151E isn't affected by this. Fix this by converting the values
> inside the read functions. linear16 gets the exponent from the VOUT_MODE
> command. The device doesn't support it, so I have to manually supply the
> value for it.
> 
> Both supported devices have now been tested to report correct vout
> values.
> 
> Fixes: 1734b4135a62 ("hwmon: Add driver for fsp-3y PSUs and PDUs")
> Signed-off-by: Václav Kubernát <kubernat@...net.cz>

Applied.

Thanks,
Guenter

> ---
>  drivers/hwmon/pmbus/fsp-3y.c | 27 +++++++++++++++++++++++++--
>  1 file changed, 25 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/hwmon/pmbus/fsp-3y.c b/drivers/hwmon/pmbus/fsp-3y.c
> index 564649e87e34..655690dde4d7 100644
> --- a/drivers/hwmon/pmbus/fsp-3y.c
> +++ b/drivers/hwmon/pmbus/fsp-3y.c
> @@ -57,7 +57,7 @@ static int page_log_to_page_real(int page_log, enum chips chip)
>  		case YH5151E_PAGE_12V_LOG:
>  			return YH5151E_PAGE_12V_REAL;
>  		case YH5151E_PAGE_5V_LOG:
> -			return YH5151E_PAGE_5V_LOG;
> +			return YH5151E_PAGE_5V_REAL;
>  		case YH5151E_PAGE_3V3_LOG:
>  			return YH5151E_PAGE_3V3_REAL;
>  		}
> @@ -103,8 +103,18 @@ static int set_page(struct i2c_client *client, int page_log)
>  
>  static int fsp3y_read_byte_data(struct i2c_client *client, int page, int reg)
>  {
> +	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
> +	struct fsp3y_data *data = to_fsp3y_data(info);
>  	int rv;
>  
> +	/*
> +	 * YH5151-E outputs vout in linear11. The conversion is done when
> +	 * reading. Here, we have to inject pmbus_core with the correct
> +	 * exponent (it is -6).
> +	 */
> +	if (data->chip == yh5151e && reg == PMBUS_VOUT_MODE)
> +		return 0x1A;
> +
>  	rv = set_page(client, page);
>  	if (rv < 0)
>  		return rv;
> @@ -114,6 +124,8 @@ static int fsp3y_read_byte_data(struct i2c_client *client, int page, int reg)
>  
>  static int fsp3y_read_word_data(struct i2c_client *client, int page, int phase, int reg)
>  {
> +	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
> +	struct fsp3y_data *data = to_fsp3y_data(info);
>  	int rv;
>  
>  	/*
> @@ -144,7 +156,18 @@ static int fsp3y_read_word_data(struct i2c_client *client, int page, int phase,
>  	if (rv < 0)
>  		return rv;
>  
> -	return i2c_smbus_read_word_data(client, reg);
> +	rv = i2c_smbus_read_word_data(client, reg);
> +	if (rv < 0)
> +		return rv;
> +
> +	/*
> +	 * YH-5151E is non-compliant and outputs output voltages in linear11
> +	 * instead of linear16.
> +	 */
> +	if (data->chip == yh5151e && reg == PMBUS_READ_VOUT)
> +		rv = sign_extend32(rv, 10) & 0xffff;
> +
> +	return rv;
>  }
>  
>  struct pmbus_driver_info fsp3y_info[] = {