| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210503121259.7a871bd0@jic23-huawei>
Date: Mon, 3 May 2021 12:12:59 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
Cc: Linux Doc Mailing List <linux-doc@...r.kernel.org>,
"Jonathan Corbet" <corbet@....net>,
Alexandru Ardelean <alexandru.ardelean@...log.com>,
Lars-Peter Clausen <lars@...afoo.de>,
linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] iio: Documentation: move incompatible ABI to
obsolete
On Tue, 27 Apr 2021 16:03:00 +0200
Mauro Carvalho Chehab <mchehab+huawei@...nel.org> wrote:
> Commit 63cd35f34d2e ("iio: Documentation: update definitions for bufferY and scan_elements")
> updated iio documentation in order to point to the newly
> per-buffer API, as it is now possible to support multi buffers.
>
> While the previous ABI will be kept forever, the best is
> for applications to use the 5.11+ ABI. So, move the
> legacy one ABI/obsolete.
>
> This fixes an issue with scripts/get_abi.pl, that doesn't
> accept two different Kernel version support for the same
> API set.
>
> Fixes: 63cd35f34d2e ("iio: Documentation: update definitions for bufferY and scan_elements")
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
Thanks for doing this Mauro.
Looks good to me.
Applied to the togreg branch of iio.git and pushed out as testing for the
autobuilders to ignore it.
Thanks,
Jonathan
> ---
> Documentation/ABI/obsolete/sysfs-bus-iio | 182 +++++++++++++++++++++++
> Documentation/ABI/testing/sysfs-bus-iio | 82 ----------
> 2 files changed, 182 insertions(+), 82 deletions(-)
> create mode 100644 Documentation/ABI/obsolete/sysfs-bus-iio
>
> diff --git a/Documentation/ABI/obsolete/sysfs-bus-iio b/Documentation/ABI/obsolete/sysfs-bus-iio
> new file mode 100644
> index 000000000000..c9531bb64816
> --- /dev/null
> +++ b/Documentation/ABI/obsolete/sysfs-bus-iio
> @@ -0,0 +1,182 @@
> +What: /sys/bus/iio/devices/iio:deviceX/buffer/length
> +KernelVersion: 2.6.35
> +Contact: linux-iio@...r.kernel.org
> +Description:
> + Number of scans contained by the buffer.
> +
> + Since Kernel 5.11, multiple buffers are supported.
> + so, it is better to use, instead:
> + /sys/bus/iio/devices/iio:deviceX/bufferY/length
> +
> +What: /sys/bus/iio/devices/iio:deviceX/buffer/enable
> +KernelVersion: 2.6.35
> +Contact: linux-iio@...r.kernel.org
> +Description:
> + Actually start the buffer capture up. Will start trigger
> + if first device and appropriate.
> +
> + Since Kernel 5.11, multiple buffers are supported.
> + so, it is better to use, instead:
> + /sys/bus/iio/devices/iio:deviceX/bufferY/enable
> +
> +What: /sys/bus/iio/devices/iio:deviceX/scan_elements
> +KernelVersion: 2.6.37
> +Contact: linux-iio@...r.kernel.org
> +Description:
> + Directory containing interfaces for elements that will be
> + captured for a single triggered sample set in the buffer.
> +
> + Since kernel 5.11 the scan_elements attributes are merged into
> + the bufferY directory, to be configurable per buffer.
> +
> +What: /sys/.../iio:deviceX/scan_elements/in_accel_x_en
> +What: /sys/.../iio:deviceX/scan_elements/in_accel_y_en
> +What: /sys/.../iio:deviceX/scan_elements/in_accel_z_en
> +What: /sys/.../iio:deviceX/scan_elements/in_anglvel_x_en
> +What: /sys/.../iio:deviceX/scan_elements/in_anglvel_y_en
> +What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_en
> +What: /sys/.../iio:deviceX/scan_elements/in_magn_x_en
> +What: /sys/.../iio:deviceX/scan_elements/in_magn_y_en
> +What: /sys/.../iio:deviceX/scan_elements/in_magn_z_en
> +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_en
> +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_en
> +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_en
> +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_en
> +What: /sys/.../iio:deviceX/scan_elements/in_timestamp_en
> +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en
> +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_en
> +What: /sys/.../iio:deviceX/scan_elements/in_voltageY-voltageZ_en
> +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_en
> +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_en
> +What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_en
> +What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_en
> +What: /sys/.../iio:deviceX/scan_elements/in_incli_x_en
> +What: /sys/.../iio:deviceX/scan_elements/in_incli_y_en
> +What: /sys/.../iio:deviceX/scan_elements/in_pressureY_en
> +What: /sys/.../iio:deviceX/scan_elements/in_pressure_en
> +What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_en
> +What: /sys/.../iio:deviceX/scan_elements/in_proximity_en
> +KernelVersion: 2.6.37
> +Contact: linux-iio@...r.kernel.org
> +Description:
> + Scan element control for triggered data capture.
> +
> + Since kernel 5.11 the scan_elements attributes are merged into
> + the bufferY directory, to be configurable per buffer.
> +
> +What: /sys/.../iio:deviceX/scan_elements/in_accel_type
> +What: /sys/.../iio:deviceX/scan_elements/in_anglvel_type
> +What: /sys/.../iio:deviceX/scan_elements/in_magn_type
> +What: /sys/.../iio:deviceX/scan_elements/in_incli_type
> +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_type
> +What: /sys/.../iio:deviceX/scan_elements/in_voltage_type
> +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_type
> +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_type
> +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_type
> +What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_type
> +What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_type
> +What: /sys/.../iio:deviceX/scan_elements/in_timestamp_type
> +What: /sys/.../iio:deviceX/scan_elements/in_pressureY_type
> +What: /sys/.../iio:deviceX/scan_elements/in_pressure_type
> +What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_type
> +What: /sys/.../iio:deviceX/scan_elements/in_proximity_type
> +KernelVersion: 2.6.37
> +Contact: linux-iio@...r.kernel.org
> +Description:
> + Description of the scan element data storage within the buffer
> + and hence the form in which it is read from user-space.
> + Form is [be|le]:[s|u]bits/storagebits[>>shift].
> + be or le specifies big or little endian. s or u specifies if
> + signed (2's complement) or unsigned. bits is the number of bits
> + of data and storagebits is the space (after padding) that it
> + occupies in the buffer. shift if specified, is the shift that
> + needs to be applied prior to masking out unused bits. Some
> + devices put their data in the middle of the transferred elements
> + with additional information on both sides. Note that some
> + devices will have additional information in the unused bits
> + so to get a clean value, the bits value must be used to mask
> + the buffer output value appropriately. The storagebits value
> + also specifies the data alignment. So s48/64>>2 will be a
> + signed 48 bit integer stored in a 64 bit location aligned to
> + a 64 bit boundary. To obtain the clean value, shift right 2
> + and apply a mask to zero the top 16 bits of the result.
> + For other storage combinations this attribute will be extended
> + appropriately.
> +
> + Since kernel 5.11 the scan_elements attributes are merged into
> + the bufferY directory, to be configurable per buffer.
> +
> +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_index
> +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_index
> +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_index
> +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_index
> +What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_index
> +What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_index
> +What: /sys/.../iio:deviceX/scan_elements/in_accel_x_index
> +What: /sys/.../iio:deviceX/scan_elements/in_accel_y_index
> +What: /sys/.../iio:deviceX/scan_elements/in_accel_z_index
> +What: /sys/.../iio:deviceX/scan_elements/in_anglvel_x_index
> +What: /sys/.../iio:deviceX/scan_elements/in_anglvel_y_index
> +What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_index
> +What: /sys/.../iio:deviceX/scan_elements/in_magn_x_index
> +What: /sys/.../iio:deviceX/scan_elements/in_magn_y_index
> +What: /sys/.../iio:deviceX/scan_elements/in_magn_z_index
> +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_index
> +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_index
> +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_index
> +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_index
> +What: /sys/.../iio:deviceX/scan_elements/in_incli_x_index
> +What: /sys/.../iio:deviceX/scan_elements/in_incli_y_index
> +What: /sys/.../iio:deviceX/scan_elements/in_timestamp_index
> +What: /sys/.../iio:deviceX/scan_elements/in_pressureY_index
> +What: /sys/.../iio:deviceX/scan_elements/in_pressure_index
> +What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_index
> +What: /sys/.../iio:deviceX/scan_elements/in_proximity_index
> +KernelVersion: 2.6.37
> +Description:
> + A single positive integer specifying the position of this
> + scan element in the buffer. Note these are not dependent on
> + what is enabled and may not be contiguous. Thus for user-space
> + to establish the full layout these must be used in conjunction
> + with all _en attributes to establish which channels are present,
> + and the relevant _type attributes to establish the data storage
> + format.
> +
> + Since kernel 5.11 the scan_elements attributes are merged into
> + the bufferY directory, to be configurable per buffer.
> +
> +What: /sys/bus/iio/devices/iio:deviceX/buffer/watermark
> +KernelVersion: 4.2
> +Contact: linux-iio@...r.kernel.org
> +Description:
> + A single positive integer specifying the maximum number of scan
> + elements to wait for.
> +
> + Poll will block until the watermark is reached.
> +
> + Blocking read will wait until the minimum between the requested
> + read amount or the low water mark is available.
> +
> + Non-blocking read will retrieve the available samples from the
> + buffer even if there are less samples then watermark level. This
> + allows the application to block on poll with a timeout and read
> + the available samples after the timeout expires and thus have a
> + maximum delay guarantee.
> +
> + Since Kernel 5.11, multiple buffers are supported.
> + so, it is better to use, instead:
> + /sys/bus/iio/devices/iio:deviceX/bufferY/watermark
> +
> +What: /sys/bus/iio/devices/iio:deviceX/buffer/data_available
> +KernelVersion: 4.16
> +Contact: linux-iio@...r.kernel.org
> +Description:
> + A read-only value indicating the bytes of data available in the
> + buffer. In the case of an output buffer, this indicates the
> + amount of empty space available to write data to. In the case of
> + an input buffer, this indicates the amount of data available for
> + reading.
> +
> + Since Kernel 5.11, multiple buffers are supported.
> + so, it is better to use, instead:
> + /sys/bus/iio/devices/iio:deviceX/bufferY/data_available
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
> index 433fe0ab74be..1164e3779fd9 100644
> --- a/Documentation/ABI/testing/sysfs-bus-iio
> +++ b/Documentation/ABI/testing/sysfs-bus-iio
> @@ -1195,16 +1195,12 @@ Description:
> The name of the trigger source being used, as per string given
> in /sys/class/iio/triggerY/name.
>
> -What: /sys/bus/iio/devices/iio:deviceX/buffer/length
> -KernelVersion: 2.6.35
> What: /sys/bus/iio/devices/iio:deviceX/bufferY/length
> KernelVersion: 5.11
> Contact: linux-iio@...r.kernel.org
> Description:
> Number of scans contained by the buffer.
>
> -What: /sys/bus/iio/devices/iio:deviceX/buffer/enable
> -KernelVersion: 2.6.35
> What: /sys/bus/iio/devices/iio:deviceX/bufferY/enable
> KernelVersion: 5.11
> Contact: linux-iio@...r.kernel.org
> @@ -1212,8 +1208,6 @@ Description:
> Actually start the buffer capture up. Will start trigger
> if first device and appropriate.
>
> -What: /sys/bus/iio/devices/iio:deviceX/scan_elements
> -KernelVersion: 2.6.37
> What: /sys/bus/iio/devices/iio:deviceX/bufferY
> KernelVersion: 5.11
> Contact: linux-iio@...r.kernel.org
> @@ -1224,34 +1218,6 @@ Description:
> Since kernel 5.11 the scan_elements attributes are merged into
> the bufferY directory, to be configurable per buffer.
>
> -What: /sys/.../iio:deviceX/scan_elements/in_accel_x_en
> -What: /sys/.../iio:deviceX/scan_elements/in_accel_y_en
> -What: /sys/.../iio:deviceX/scan_elements/in_accel_z_en
> -What: /sys/.../iio:deviceX/scan_elements/in_anglvel_x_en
> -What: /sys/.../iio:deviceX/scan_elements/in_anglvel_y_en
> -What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_en
> -What: /sys/.../iio:deviceX/scan_elements/in_magn_x_en
> -What: /sys/.../iio:deviceX/scan_elements/in_magn_y_en
> -What: /sys/.../iio:deviceX/scan_elements/in_magn_z_en
> -What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_en
> -What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_en
> -What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_en
> -What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_en
> -What: /sys/.../iio:deviceX/scan_elements/in_timestamp_en
> -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en
> -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_en
> -What: /sys/.../iio:deviceX/scan_elements/in_voltageY-voltageZ_en
> -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_en
> -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_en
> -What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_en
> -What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_en
> -What: /sys/.../iio:deviceX/scan_elements/in_incli_x_en
> -What: /sys/.../iio:deviceX/scan_elements/in_incli_y_en
> -What: /sys/.../iio:deviceX/scan_elements/in_pressureY_en
> -What: /sys/.../iio:deviceX/scan_elements/in_pressure_en
> -What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_en
> -What: /sys/.../iio:deviceX/scan_elements/in_proximity_en
> -KernelVersion: 2.6.37
> What: /sys/.../iio:deviceX/bufferY/in_accel_x_en
> What: /sys/.../iio:deviceX/bufferY/in_accel_y_en
> What: /sys/.../iio:deviceX/bufferY/in_accel_z_en
> @@ -1284,23 +1250,6 @@ Contact: linux-iio@...r.kernel.org
> Description:
> Scan element control for triggered data capture.
>
> -What: /sys/.../iio:deviceX/scan_elements/in_accel_type
> -What: /sys/.../iio:deviceX/scan_elements/in_anglvel_type
> -What: /sys/.../iio:deviceX/scan_elements/in_magn_type
> -What: /sys/.../iio:deviceX/scan_elements/in_incli_type
> -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_type
> -What: /sys/.../iio:deviceX/scan_elements/in_voltage_type
> -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_type
> -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_type
> -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_type
> -What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_type
> -What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_type
> -What: /sys/.../iio:deviceX/scan_elements/in_timestamp_type
> -What: /sys/.../iio:deviceX/scan_elements/in_pressureY_type
> -What: /sys/.../iio:deviceX/scan_elements/in_pressure_type
> -What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_type
> -What: /sys/.../iio:deviceX/scan_elements/in_proximity_type
> -KernelVersion: 2.6.37
> What: /sys/.../iio:deviceX/bufferY/in_accel_type
> What: /sys/.../iio:deviceX/bufferY/in_anglvel_type
> What: /sys/.../iio:deviceX/bufferY/in_magn_type
> @@ -1347,33 +1296,6 @@ Description:
> If the type parameter can take one of a small set of values,
> this attribute lists them.
>
> -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_index
> -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_index
> -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_index
> -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_index
> -What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_index
> -What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_index
> -What: /sys/.../iio:deviceX/scan_elements/in_accel_x_index
> -What: /sys/.../iio:deviceX/scan_elements/in_accel_y_index
> -What: /sys/.../iio:deviceX/scan_elements/in_accel_z_index
> -What: /sys/.../iio:deviceX/scan_elements/in_anglvel_x_index
> -What: /sys/.../iio:deviceX/scan_elements/in_anglvel_y_index
> -What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_index
> -What: /sys/.../iio:deviceX/scan_elements/in_magn_x_index
> -What: /sys/.../iio:deviceX/scan_elements/in_magn_y_index
> -What: /sys/.../iio:deviceX/scan_elements/in_magn_z_index
> -What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_index
> -What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_index
> -What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_index
> -What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_index
> -What: /sys/.../iio:deviceX/scan_elements/in_incli_x_index
> -What: /sys/.../iio:deviceX/scan_elements/in_incli_y_index
> -What: /sys/.../iio:deviceX/scan_elements/in_timestamp_index
> -What: /sys/.../iio:deviceX/scan_elements/in_pressureY_index
> -What: /sys/.../iio:deviceX/scan_elements/in_pressure_index
> -What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_index
> -What: /sys/.../iio:deviceX/scan_elements/in_proximity_index
> -KernelVersion: 2.6.37
> What: /sys/.../iio:deviceX/bufferY/in_voltageY_index
> What: /sys/.../iio:deviceX/bufferY/in_voltageY_supply_index
> What: /sys/.../iio:deviceX/bufferY/in_voltageY_i_index
> @@ -1613,8 +1535,6 @@ Description:
> Specifies number of seconds in which we compute the steps
> that occur in order to decide if the consumer is making steps.
>
> -What: /sys/bus/iio/devices/iio:deviceX/buffer/watermark
> -KernelVersion: 4.2
> What: /sys/bus/iio/devices/iio:deviceX/bufferY/watermark
> KernelVersion: 5.11
> Contact: linux-iio@...r.kernel.org
> @@ -1633,8 +1553,6 @@ Description:
> the available samples after the timeout expires and thus have a
> maximum delay guarantee.
>
> -What: /sys/bus/iio/devices/iio:deviceX/buffer/data_available
> -KernelVersion: 4.16
> What: /sys/bus/iio/devices/iio:deviceX/bufferY/data_available
> KernelVersion: 5.11
> Contact: linux-iio@...r.kernel.org
Powered by blists - more mailing lists