lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1620091264-418-1-git-send-email-wcheng@codeaurora.org>
Date:   Mon,  3 May 2021 18:21:04 -0700
From:   Wesley Cheng <wcheng@...eaurora.org>
To:     balbi@...nel.org, gregkh@...uxfoundation.org
Cc:     linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
        Thinh.Nguyen@...opsys.com, jackp@...eaurora.org,
        Wesley Cheng <wcheng@...eaurora.org>
Subject: [PATCH v2] usb: dwc3: gadget: Avoid canceling current request for queuing error

If an error is received when issuing a start or update transfer
command, the error handler will stop all active requests (including
the current USB request), and call dwc3_gadget_giveback() to notify
function drivers of the requests which have been stopped.  Avoid
having to cancel the current request which is trying to be queued, as
the function driver will handle the EP queue error accordingly.
Simply unmap the request as it was done before, and allow previously
started transfers to be cleaned up.

Signed-off-by: Wesley Cheng <wcheng@...eaurora.org>
---
Changes in v2:
 - Addressed feedback received by making sure the logic only applies to a req
   which is being queued, decrementing the enqueue pointer, and only clearing
   the HWO bit.

 drivers/usb/dwc3/gadget.c | 75 +++++++++++++++++++++++++++++++++++++++++------
 1 file changed, 66 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index dd80e5c..c8ddbe1 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -140,6 +140,29 @@ int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state)
 }
 
 /**
+ * dwc3_ep_dec_trb - decrement a trb index.
+ * @index: Pointer to the TRB index to increment.
+ *
+ * The index should never point to the link TRB. After decrementing,
+ * if index is zero, wrap around to the TRB before the link TRB.
+ */
+static void dwc3_ep_dec_trb(u8 *index)
+{
+	(*index)--;
+	if (*index < 0)
+		*index = DWC3_TRB_NUM - 1;
+}
+
+/**
+ * dwc3_ep_dec_enq - decrement endpoint's enqueue pointer
+ * @dep: The endpoint whose enqueue pointer we're decrementing
+ */
+static void dwc3_ep_dec_enq(struct dwc3_ep *dep)
+{
+	dwc3_ep_dec_trb(&dep->trb_enqueue);
+}
+
+/**
  * dwc3_ep_inc_trb - increment a trb index.
  * @index: Pointer to the TRB index to increment.
  *
@@ -1352,7 +1375,26 @@ static int dwc3_prepare_trbs(struct dwc3_ep *dep)
 
 static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep);
 
-static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep)
+static void dwc3_gadget_ep_revert_trbs(struct dwc3_ep *dep, struct dwc3_request *req)
+{
+	int i;
+
+	if (!req->trb)
+		return;
+
+	for (i = 0; i < req->num_trbs; i++) {
+		struct dwc3_trb *trb;
+
+		trb = &dep->trb_pool[dep->trb_enqueue];
+		trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+		dwc3_ep_dec_enq(dep);
+	}
+
+	req->num_trbs = 0;
+}
+
+static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep,
+				       struct dwc3_request *queued_req)
 {
 	struct dwc3_gadget_ep_cmd_params params;
 	struct dwc3_request		*req;
@@ -1410,8 +1452,23 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep)
 
 		dwc3_stop_active_transfer(dep, true, true);
 
-		list_for_each_entry_safe(req, tmp, &dep->started_list, list)
-			dwc3_gadget_move_cancelled_request(req, DWC3_REQUEST_STATUS_DEQUEUED);
+		/*
+		 * In order to ensure the logic is applied to a request being
+		 * queued by dwc3_gadget_ep_queue(), it needs to explicitly
+		 * check that req is the same as queued_req (request being
+		 * queued).  If so, then just unmap and decrement the enqueue
+		 * pointer, as the usb_ep_queue() error handler in the function
+		 * driver will handle cleaning up the USB request.
+		 */
+		list_for_each_entry_safe(req, tmp, &dep->started_list, list) {
+			if (req == queued_req) {
+				dwc3_gadget_ep_revert_trbs(dep, req);
+				dwc3_gadget_del_and_unmap_request(dep, req, ret);
+			} else {
+				dwc3_gadget_move_cancelled_request(req,
+								   DWC3_REQUEST_STATUS_DEQUEUED);
+			}
+		}
 
 		/* If ep isn't started, then there's no end transfer pending */
 		if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING))
@@ -1546,7 +1603,7 @@ static int dwc3_gadget_start_isoc_quirk(struct dwc3_ep *dep)
 	dep->start_cmd_status = 0;
 	dep->combo_num = 0;
 
-	return __dwc3_gadget_kick_transfer(dep);
+	return __dwc3_gadget_kick_transfer(dep, NULL);
 }
 
 static int __dwc3_gadget_start_isoc(struct dwc3_ep *dep)
@@ -1593,7 +1650,7 @@ static int __dwc3_gadget_start_isoc(struct dwc3_ep *dep)
 	for (i = 0; i < DWC3_ISOC_MAX_RETRIES; i++) {
 		dep->frame_number = DWC3_ALIGN_FRAME(dep, i + 1);
 
-		ret = __dwc3_gadget_kick_transfer(dep);
+		ret = __dwc3_gadget_kick_transfer(dep, NULL);
 		if (ret != -EAGAIN)
 			break;
 	}
@@ -1684,7 +1741,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
 		}
 	}
 
-	return __dwc3_gadget_kick_transfer(dep);
+	return __dwc3_gadget_kick_transfer(dep, req);
 }
 
 static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
@@ -1893,7 +1950,7 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
 
 		if ((dep->flags & DWC3_EP_DELAY_START) &&
 		    !usb_endpoint_xfer_isoc(dep->endpoint.desc))
-			__dwc3_gadget_kick_transfer(dep);
+			__dwc3_gadget_kick_transfer(dep, NULL);
 
 		dep->flags &= ~DWC3_EP_DELAY_START;
 	}
@@ -2992,7 +3049,7 @@ static bool dwc3_gadget_endpoint_trbs_complete(struct dwc3_ep *dep,
 		(list_empty(&dep->pending_list) || status == -EXDEV))
 		dwc3_stop_active_transfer(dep, true, true);
 	else if (dwc3_gadget_ep_should_continue(dep))
-		if (__dwc3_gadget_kick_transfer(dep) == 0)
+		if (__dwc3_gadget_kick_transfer(dep, NULL) == 0)
 			no_started_trb = false;
 
 out:
@@ -3106,7 +3163,7 @@ static void dwc3_gadget_endpoint_command_complete(struct dwc3_ep *dep,
 
 	if ((dep->flags & DWC3_EP_DELAY_START) &&
 	    !usb_endpoint_xfer_isoc(dep->endpoint.desc))
-		__dwc3_gadget_kick_transfer(dep);
+		__dwc3_gadget_kick_transfer(dep, NULL);
 
 	dep->flags &= ~DWC3_EP_DELAY_START;
 }
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ