| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <af80c7b4-f866-6964-e0a0-5b1941668881@redhat.com>
Date: Tue, 4 May 2021 07:00:16 -0700
From: Tom Rix <trix@...hat.com>
To: Lizhi Hou <lizhi.hou@...inx.com>, linux-kernel@...r.kernel.org
Cc: linux-fpga@...r.kernel.org, maxz@...inx.com,
sonal.santan@...inx.com, yliu@...inx.com, michal.simek@...inx.com,
stefanos@...inx.com, devicetree@...r.kernel.org, mdf@...nel.org,
robh@...nel.org, Max Zhen <max.zhen@...inx.com>
Subject: Re: [PATCH V5 XRT Alveo 12/20] fpga: xrt: VSEC driver
On 4/27/21 1:54 PM, Lizhi Hou wrote:
> Add VSEC driver. VSEC is a hardware function discovered by walking
> PCI Express configure space. A xrt device node will be created for it.
> VSEC provides board logic UUID and few offset of other hardware functions.
>
> Signed-off-by: Sonal Santan <sonal.santan@...inx.com>
> Signed-off-by: Max Zhen <max.zhen@...inx.com>
> Signed-off-by: Lizhi Hou <lizhi.hou@...inx.com>
> ---
> drivers/fpga/xrt/lib/xleaf/vsec.c | 372 ++++++++++++++++++++++++++++++
> 1 file changed, 372 insertions(+)
> create mode 100644 drivers/fpga/xrt/lib/xleaf/vsec.c
>
> diff --git a/drivers/fpga/xrt/lib/xleaf/vsec.c b/drivers/fpga/xrt/lib/xleaf/vsec.c
> new file mode 100644
> index 000000000000..2bc7578c5f5d
> --- /dev/null
> +++ b/drivers/fpga/xrt/lib/xleaf/vsec.c
> @@ -0,0 +1,372 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Xilinx Alveo FPGA VSEC Driver
> + *
> + * Copyright (C) 2020-2021 Xilinx, Inc.
> + *
> + * Authors:
> + * Lizhi Hou<Lizhi.Hou@...inx.com>
> + */
> +
> +#include <linux/regmap.h>
> +#include "metadata.h"
> +#include "xdevice.h"
> +#include "xleaf.h"
> +
> +#define XRT_VSEC "xrt_vsec"
> +
> +#define VSEC_TYPE_UUID 0x50
> +#define VSEC_TYPE_FLASH 0x51
> +#define VSEC_TYPE_PLATINFO 0x52
> +#define VSEC_TYPE_MAILBOX 0x53
> +#define VSEC_TYPE_END 0xff
> +
> +#define VSEC_UUID_LEN 16
> +
> +#define VSEC_REG_FORMAT 0x0
> +#define VSEC_REG_LENGTH 0x4
> +#define VSEC_REG_ENTRY 0x8
> +
> +struct xrt_vsec_header {
> + u32 format;
> + u32 length;
> + u32 entry_sz;
> + u32 rsvd;
> +} __packed;
> +
> +struct xrt_vsec_entry {
> + u8 type;
> + u8 bar_rev;
> + u16 off_lo;
> + u32 off_hi;
> + u8 ver_type;
> + u8 minor;
> + u8 major;
> + u8 rsvd0;
> + u32 rsvd1;
> +} __packed;
> +
> +struct vsec_device {
> + u8 type;
> + char *ep_name;
> + ulong size;
> + char *compat;
ok
> +};
> +
> +static struct vsec_device vsec_devs[] = {
> + {
> + .type = VSEC_TYPE_UUID,
> + .ep_name = XRT_MD_NODE_BLP_ROM,
> + .size = VSEC_UUID_LEN,
> + .compat = "vsec-uuid",
> + },
> + {
> + .type = VSEC_TYPE_FLASH,
> + .ep_name = XRT_MD_NODE_FLASH_VSEC,
> + .size = 4096,
> + .compat = "vsec-flash",
> + },
> + {
> + .type = VSEC_TYPE_PLATINFO,
> + .ep_name = XRT_MD_NODE_PLAT_INFO,
> + .size = 4,
> + .compat = "vsec-platinfo",
> + },
> + {
> + .type = VSEC_TYPE_MAILBOX,
> + .ep_name = XRT_MD_NODE_MAILBOX_VSEC,
> + .size = 48,
> + .compat = "vsec-mbx",
> + },
> +};
> +
> +XRT_DEFINE_REGMAP_CONFIG(vsec_regmap_config);
ok
> +
> +struct xrt_vsec {
> + struct xrt_device *xdev;
> + struct regmap *regmap;
> + u32 length;
> +
> + char *metadata;
> + char uuid[VSEC_UUID_LEN];
> + int group;
> +};
> +
> +static inline int vsec_read_entry(struct xrt_vsec *vsec, u32 index, struct xrt_vsec_entry *entry)
> +{
> + int ret;
> +
> + ret = regmap_bulk_read(vsec->regmap, sizeof(struct xrt_vsec_header) +
> + index * sizeof(struct xrt_vsec_entry), entry,
> + sizeof(struct xrt_vsec_entry) /
> + vsec_regmap_config.reg_stride);
> +
> + return ret;
> +}
> +
> +static inline u32 vsec_get_bar(struct xrt_vsec_entry *entry)
> +{
> + return (entry->bar_rev >> 4) & 0xf;
ok
> +}
> +
> +static inline u64 vsec_get_bar_off(struct xrt_vsec_entry *entry)
> +{
> + return entry->off_lo | ((u64)entry->off_hi << 16);
> +}
> +
> +static inline u32 vsec_get_rev(struct xrt_vsec_entry *entry)
> +{
> + return entry->bar_rev & 0xf;
> +}
> +
> +static char *type2epname(u32 type)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(vsec_devs); i++) {
> + if (vsec_devs[i].type == type)
> + return (vsec_devs[i].ep_name);
> + }
> +
> + return NULL;
> +}
> +
> +static ulong type2size(u32 type)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(vsec_devs); i++) {
> + if (vsec_devs[i].type == type)
> + return (vsec_devs[i].size);
> + }
> +
> + return 0;
> +}
> +
> +static char *type2compat(u32 type)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(vsec_devs); i++) {
> + if (vsec_devs[i].type == type)
> + return (vsec_devs[i].compat);
> + }
> +
> + return NULL;
> +}
> +
> +static int xrt_vsec_add_node(struct xrt_vsec *vsec,
> + void *md_blob, struct xrt_vsec_entry *p_entry)
> +{
> + struct xrt_md_endpoint ep;
> + char compat_ver[64];
> + int ret;
> +
> + if (!type2epname(p_entry->type))
> + return -EINVAL;
> +
> + /*
> + * VSEC may have more than 1 mailbox instance for the card
> + * which has more than 1 physical function.
> + * This is not supported for now. Assuming only one mailbox
> + */
> +
> + snprintf(compat_ver, sizeof(compat_ver) - 1, "%d-%d.%d.%d",
> + p_entry->ver_type, p_entry->major, p_entry->minor,
> + vsec_get_rev(p_entry));
> + ep.ep_name = type2epname(p_entry->type);
> + ep.bar_index = vsec_get_bar(p_entry);
> + ep.bar_off = vsec_get_bar_off(p_entry);
> + ep.size = type2size(p_entry->type);
> + ep.compat = type2compat(p_entry->type);
> + ep.compat_ver = compat_ver;
> + ret = xrt_md_add_endpoint(DEV(vsec->xdev), vsec->metadata, &ep);
> + if (ret)
> + xrt_err(vsec->xdev, "add ep failed, ret %d", ret);
> +
> + return ret;
> +}
> +
> +static int xrt_vsec_create_metadata(struct xrt_vsec *vsec)
> +{
> + struct xrt_vsec_entry entry;
> + int i, ret;
> +
> + ret = xrt_md_create(&vsec->xdev->dev, &vsec->metadata);
> + if (ret) {
> + xrt_err(vsec->xdev, "create metadata failed");
> + return ret;
> + }
> +
> + for (i = 0; i * sizeof(entry) < vsec->length -
> + sizeof(struct xrt_vsec_header); i++) {
> + ret = vsec_read_entry(vsec, i, &entry);
> + if (ret) {
> + xrt_err(vsec->xdev, "failed read entry %d, ret %d", i, ret);
> + goto fail;
> + }
> +
> + if (entry.type == VSEC_TYPE_END)
> + break;
> + ret = xrt_vsec_add_node(vsec, vsec->metadata, &entry);
> + if (ret)
> + goto fail;
> + }
> +
> + return 0;
> +
> +fail:
> + vfree(vsec->metadata);
> + vsec->metadata = NULL;
> + return ret;
> +}
> +
> +static int xrt_vsec_leaf_call(struct xrt_device *xdev, u32 cmd, void *arg)
> +{
> + int ret = 0;
> +
> + switch (cmd) {
> + case XRT_XLEAF_EVENT:
> + /* Does not handle any event. */
> + break;
> + default:
> + ret = -EINVAL;
> + xrt_err(xdev, "should never been called");
> + break;
> + }
> +
> + return ret;
> +}
> +
> +static int xrt_vsec_mapio(struct xrt_vsec *vsec)
> +{
> + struct xrt_subdev_platdata *pdata = DEV_PDATA(vsec->xdev);
> + struct resource *res = NULL;
> + void __iomem *base = NULL;
> + const u64 *bar_off;
> + const u32 *bar;
> + u64 addr;
> + int ret;
> +
> + if (!pdata || xrt_md_size(DEV(vsec->xdev), pdata->xsp_dtb) == XRT_MD_INVALID_LENGTH) {
> + xrt_err(vsec->xdev, "empty metadata");
> + return -EINVAL;
> + }
> +
> + ret = xrt_md_get_prop(DEV(vsec->xdev), pdata->xsp_dtb, XRT_MD_NODE_VSEC,
> + NULL, XRT_MD_PROP_BAR_IDX, (const void **)&bar, NULL);
> + if (ret) {
> + xrt_err(vsec->xdev, "failed to get bar idx, ret %d", ret);
> + return -EINVAL;
> + }
> +
> + ret = xrt_md_get_prop(DEV(vsec->xdev), pdata->xsp_dtb, XRT_MD_NODE_VSEC,
> + NULL, XRT_MD_PROP_OFFSET, (const void **)&bar_off, NULL);
> + if (ret) {
> + xrt_err(vsec->xdev, "failed to get bar off, ret %d", ret);
> + return -EINVAL;
> + }
> +
> + xrt_info(vsec->xdev, "Map vsec at bar %d, offset 0x%llx",
> + be32_to_cpu(*bar), be64_to_cpu(*bar_off));
> +
> + xleaf_get_root_res(vsec->xdev, be32_to_cpu(*bar), &res);
> + if (!res) {
> + xrt_err(vsec->xdev, "failed to get bar addr");
> + return -EINVAL;
> + }
> +
> + addr = res->start + be64_to_cpu(*bar_off);
> +
> + base = devm_ioremap(&vsec->xdev->dev, addr, vsec_regmap_config.max_register);
> + if (!base) {
> + xrt_err(vsec->xdev, "Map failed");
> + return -EIO;
> + }
> +
> + vsec->regmap = devm_regmap_init_mmio(&vsec->xdev->dev, base, &vsec_regmap_config);
> + if (IS_ERR(vsec->regmap)) {
> + xrt_err(vsec->xdev, "regmap %pR failed", res);
> + return PTR_ERR(vsec->regmap);
> + }
> +
> + ret = regmap_read(vsec->regmap, VSEC_REG_LENGTH, &vsec->length);
> + if (ret) {
> + xrt_err(vsec->xdev, "failed to read length %d", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void xrt_vsec_remove(struct xrt_device *xdev)
> +{
> + struct xrt_vsec *vsec;
> +
> + vsec = xrt_get_drvdata(xdev);
> +
> + if (vsec->group >= 0)
> + xleaf_destroy_group(xdev, vsec->group);
> + vfree(vsec->metadata);
> +}
> +
> +static int xrt_vsec_probe(struct xrt_device *xdev)
> +{
> + struct xrt_vsec *vsec;
> + int ret = 0;
> +
> + vsec = devm_kzalloc(&xdev->dev, sizeof(*vsec), GFP_KERNEL);
> + if (!vsec)
> + return -ENOMEM;
> +
> + vsec->xdev = xdev;
> + vsec->group = -1;
> + xrt_set_drvdata(xdev, vsec);
> +
> + ret = xrt_vsec_mapio(vsec);
> + if (ret)
> + goto failed;
> +
> + ret = xrt_vsec_create_metadata(vsec);
> + if (ret) {
> + xrt_err(xdev, "create metadata failed, ret %d", ret);
> + goto failed;
> + }
> + ret = xleaf_create_group(xdev, vsec->metadata);
ok
Reviewed-by: Tom Rix <trix@...hat.com>
> + if (ret < 0) {
> + xrt_err(xdev, "create group failed, ret %d", vsec->group);
> + goto failed;
> + }
> + vsec->group = ret;
> +
> + return 0;
> +
> +failed:
> + xrt_vsec_remove(xdev);
> +
> + return ret;
> +}
> +
> +static struct xrt_dev_endpoints xrt_vsec_endpoints[] = {
> + {
> + .xse_names = (struct xrt_dev_ep_names []){
> + { .ep_name = XRT_MD_NODE_VSEC },
> + { NULL },
> + },
> + .xse_min_ep = 1,
> + },
> + { 0 },
> +};
> +
> +static struct xrt_driver xrt_vsec_driver = {
> + .driver = {
> + .name = XRT_VSEC,
> + },
> + .subdev_id = XRT_SUBDEV_VSEC,
> + .endpoints = xrt_vsec_endpoints,
> + .probe = xrt_vsec_probe,
> + .remove = xrt_vsec_remove,
> + .leaf_call = xrt_vsec_leaf_call,
> +};
> +
> +XRT_LEAF_INIT_FINI_FUNC(vsec);
Powered by blists - more mailing lists