[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YJGw86qt6iGsYJJ2@google.com>
Date: Tue, 4 May 2021 13:39:15 -0700
From: Matthias Kaehlcke <mka@...omium.org>
To: Sandeep Maheswaram <sanm@...eaurora.org>
Cc: Rob Herring <robh+dt@...nel.org>, Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Felipe Balbi <balbi@...nel.org>,
Stephen Boyd <swboyd@...omium.org>,
Doug Anderson <dianders@...omium.org>,
devicetree@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
Manu Gautam <mgautam@...eaurora.org>
Subject: Re: [PATCH v3 1/2] arm64: dts: qcom: sc7280: Add USB related nodes
On Tue, May 04, 2021 at 12:38:54PM +0530, Sandeep Maheswaram wrote:
> Add nodes for DWC3 USB controller, QMP and HS USB PHYs in sc7280 SOC.
>
> Signed-off-by: Sandeep Maheswaram <sanm@...eaurora.org>
> ---
> changes in v3:
> removed space between clock and clock-names.
>
> changes in v2:
> Moved #clock-cells property to child node in usb_1_qmpphy.
> changed phy@...9000 to phy-wrapper@...9000 to avoid binding check error.
> changed lanes@...9200 to usb3-phy@...9200 to avoid binding check error.
>
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 149 +++++++++++++++++++++++++++++++++++
> 1 file changed, 149 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 2cc4785..c95e143 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -805,6 +805,110 @@
> };
> };
>
> + usb_1_hsphy: phy@...3000 {
> + compatible = "qcom,sc7280-usb-hs-phy",
> + "qcom,usb-snps-hs-7nm-phy";
> + reg = <0 0x088e3000 0 0x400>;
> + status = "disabled";
> + #phy-cells = <0>;
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "ref";
> +
> + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> + };
> +
> + usb_2_hsphy: phy@...4000 {
> + compatible = "qcom,sc7280-usb-hs-phy",
> + "qcom,usb-snps-hs-7nm-phy";
> + reg = <0 0x088e4000 0 0x400>;
> + status = "disabled";
> + #phy-cells = <0>;
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "ref";
> +
> + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
> + };
> +
> + usb_1_qmpphy: phy-wrapper@...9000 {
> + compatible = "qcom,sm8250-qmp-usb3-phy";
> + reg = <0 0x088e9000 0 0x200>,
> + <0 0x088e8000 0 0x20>;
> + reg-names = "reg-base", "dp_com";
> + status = "disabled";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
> + clock-names = "aux", "ref_clk_src", "com_aux";
> +
> + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
> + <&gcc GCC_USB3_PHY_PRIM_BCR>;
> + reset-names = "phy", "common";
> +
> + usb_1_ssphy: usb3-phy@...9200 {
> + reg = <0 0x088e9200 0 0x200>,
> + <0 0x088e9400 0 0x200>,
> + <0 0x088e9c00 0 0x400>,
> + <0 0x088e9600 0 0x200>,
> + <0 0x088e9800 0 0x200>,
> + <0 0x088e9a00 0 0x100>;
> + #phy-cells = <0>;
> + #clock-cells = <1>;
> + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> + clock-names = "pipe0";
> + clock-output-names = "usb3_phy_pipe_clk_src";
> + };
> + };
> +
> + usb_2: usb@...8800 {
> + compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
> + reg = <0 0x08cf8800 0 0x400>;
> + status = "disabled";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + dma-ranges;
> +
> + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
> + <&gcc GCC_USB30_SEC_MASTER_CLK>,
> + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
> + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
> + <&gcc GCC_USB30_SEC_SLEEP_CLK>;
> + clock-names = "cfg_noc", "core", "iface","mock_utmi",
> + "sleep";
> +
> + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
> + <&gcc GCC_USB30_SEC_MASTER_CLK>;
> + assigned-clock-rates = <19200000>, <200000000>;
> +
> + interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
> + <&pdc 13 IRQ_TYPE_EDGE_RISING>,
> + <&pdc 12 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "hs_phy_irq",
> + "dm_hs_phy_irq", "dp_hs_phy_irq";
> +
> + power-domains = <&gcc GCC_USB30_SEC_GDSC>;
> +
> + resets = <&gcc GCC_USB30_SEC_BCR>;
> +
> + usb_2_dwc3: dwc3@...0000 {
> + compatible = "snps,dwc3";
> + reg = <0 0x08c00000 0 0xe000>;
> + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
> + iommus = <&apps_smmu 0xa0 0x0>;
> + snps,dis_u2_susphy_quirk;
> + snps,dis_enblslpm_quirk;
> + phys = <&usb_2_hsphy>;
> + phy-names = "usb2-phy";
> + maximum-speed = "high-speed";
> + };
> + };
> +
> system-cache-controller@...0000 {
> compatible = "qcom,sc7280-llcc";
> reg = <0 0x09200000 0 0xd0000>, <0 0x09600000 0 0x50000>;
> @@ -812,6 +916,51 @@
> interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> + usb_1: usb@...8800 {
> + compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
> + reg = <0 0x0a6f8800 0 0x400>;
> + status = "disabled";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + dma-ranges;
> +
> + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
> + <&gcc GCC_USB30_PRIM_MASTER_CLK>,
> + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
> + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> + <&gcc GCC_USB30_PRIM_SLEEP_CLK>;
> + clock-names = "cfg_noc", "core", "iface", "mock_utmi",
> + "sleep";
> +
> + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> + <&gcc GCC_USB30_PRIM_MASTER_CLK>;
> + assigned-clock-rates = <19200000>, <200000000>;
> +
> + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
> + <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
> + <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
> + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
> + "dm_hs_phy_irq", "ss_phy_irq";
> +
> + power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
> +
> + resets = <&gcc GCC_USB30_PRIM_BCR>;
> +
> + usb_1_dwc3: dwc3@...0000 {
> + compatible = "snps,dwc3";
> + reg = <0 0x0a600000 0 0xe000>;
> + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> + iommus = <&apps_smmu 0xe0 0x0>;
> + snps,dis_u2_susphy_quirk;
> + snps,dis_enblslpm_quirk;
> + phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
> + phy-names = "usb2-phy", "usb3-phy";
> + maximum-speed = "super-speed";
> + };
> + };
> +
> pdc: interrupt-controller@...0000 {
> compatible = "qcom,sc7280-pdc", "qcom,pdc";
> reg = <0 0x0b220000 0 0x30000>;
Reviewed-by: Matthias Kaehlcke <mka@...omium.org>
Powered by blists - more mailing lists