[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Wed, 5 May 2021 12:26:31 +0800
From: Greentime Hu <greentime.hu@...ive.com>
To: Bjorn Helgaas <helgaas@...nel.org>
Cc: Paul Walmsley <paul.walmsley@...ive.com>, hes@...ive.com,
Erik Danie <erik.danie@...ive.com>,
Zong Li <zong.li@...ive.com>,
Bjorn Helgaas <bhelgaas@...gle.com>, robh+dt@...nel.org,
Albert Ou <aou@...s.berkeley.edu>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Philipp Zabel <p.zabel@...gutronix.de>, alex.dewar90@...il.com,
khilman@...libre.com, hayashi.kunihiko@...ionext.com,
vidyas@...dia.com, jh80.chung@...sung.com,
linux-pci@...r.kernel.org, devicetree@...r.kernel.org,
linux-riscv <linux-riscv@...ts.infradead.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-clk@...r.kernel.org
Subject: Re: [PATCH v6 5/6] PCI: fu740: Add SiFive FU740 PCIe host controller driver
Bjorn Helgaas <helgaas@...nel.org> 於 2021年5月4日 週二 下午9:46寫道:
>
> On Tue, May 04, 2021 at 06:59:39PM +0800, Greentime Hu wrote:
> > From: Paul Walmsley <paul.walmsley@...ive.com>
> >
> > Add driver for the SiFive FU740 PCIe host controller.
> > This controller is based on the DesignWare PCIe core.
> >
> > Signed-off-by: Paul Walmsley <paul.walmsley@...ive.com>
> > Co-developed-by: Henry Styles <hes@...ive.com>
> > Signed-off-by: Henry Styles <hes@...ive.com>
> > Co-developed-by: Erik Danie <erik.danie@...ive.com>
> > Signed-off-by: Erik Danie <erik.danie@...ive.com>
> > Co-developed-by: Greentime Hu <greentime.hu@...ive.com>
> > Signed-off-by: Greentime Hu <greentime.hu@...ive.com>
> > ---
> > drivers/pci/controller/dwc/Kconfig | 10 +
> > drivers/pci/controller/dwc/Makefile | 1 +
> > drivers/pci/controller/dwc/pcie-fu740.c | 309 ++++++++++++++++++++++++
> > 3 files changed, 320 insertions(+)
> > create mode 100644 drivers/pci/controller/dwc/pcie-fu740.c
> >
> > diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> > index 22c5529e9a65..255d43b1661b 100644
> > --- a/drivers/pci/controller/dwc/Kconfig
> > +++ b/drivers/pci/controller/dwc/Kconfig
> > @@ -318,4 +318,14 @@ config PCIE_AL
> > required only for DT-based platforms. ACPI platforms with the
> > Annapurna Labs PCIe controller don't need to enable this.
> >
> > +config PCIE_FU740
> > + bool "SiFive FU740 PCIe host controller"
> > + depends on PCI_MSI_IRQ_DOMAIN
> > + depends on SOC_SIFIVE || COMPILE_TEST
> > + depends on GPIOLIB
>
> 1) I'm a little disappointed that I reported the build issue 6 days
> ago when we were already in the merge window, and it's taken until
> now to make some progress.
>
> 2) I would prefer not to depend on GPIOLIB because it reduces
> compile-test coverage. For example, the x86_64 defconfig does not
> enable GPIOLIB, so one must manually enable it to even be able to
> enable PCIE_FU740.
>
> Many other PCI controller drivers use GPIO, but no others depend on
> GPIOLIB, so I infer that in the !GPIOLIB case, gpio/consumer.h
> provides the stubs required for compile testing.
>
> We could have a conversation about whether it's better to
> explicitly depend on GPIOLIB here, or whether building a working
> FU740 driver implicitly depends on GPIOLIB being selected
> elsewhere. That implicit dependency *is* a little obscure, but I
> think that's what other drivers currently do, and I'd like to do
> this consistently unless there's a good reason otherwise.
>
> Here are some examples of other drivers:
>
> dwc/pci-dra7xx.c:
> config PCI_DRA7XX_HOST
> depends on SOC_DRA7XX || COMPILE_TEST
>
> config SOC_DRA7XX
> select ARCH_OMAP2PLUS
>
> config ARCH_OMAP2PLUS
> select GPIOLIB
>
> dwc/pci-meson.c:
> config PCI_MESON
> # doesn't, but probably *should* depend on "ARCH_MESON || COMPILE_TEST"
>
> menuconfig ARCH_MESON
> select GPIOLIB
>
> dwc/pcie-qcom.c:
> config PCIE_QCOM
> depends on OF && (ARCH_QCOM || COMPILE_TEST)
>
> config ARCH_QCOM
> select GPIOLIB
>
> pcie-rockchip.c:
> config PCIE_ROCKCHIP_HOST
> depends on ARCH_ROCKCHIP || COMPILE_TEST
>
> config ARCH_ROCKCHIP
> select GPIOLIB
>
> > + select PCIE_DW_HOST
> > + help
> > + Say Y here if you want PCIe controller support for the SiFive
> > + FU740.
> > +
> > endmenu
Hi,
Sorry for late to debug this case. I was working on other works and
just missed the email.
How about this?
diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
index e1b2690b6e45..66f57f2db49d 100644
--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -7,6 +7,7 @@ config SOC_SIFIVE
select CLK_SIFIVE
select CLK_SIFIVE_PRCI
select SIFIVE_PLIC
+ select GPIOLIB if PCIE_FU740
help
This enables support for SiFive SoC platform hardware.
diff --git a/drivers/pci/controller/dwc/Kconfig
b/drivers/pci/controller/dwc/Kconfig
index 255d43b1661b..0a37d21ed64e 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -322,7 +322,6 @@ config PCIE_FU740
bool "SiFive FU740 PCIe host controller"
depends on PCI_MSI_IRQ_DOMAIN
depends on SOC_SIFIVE || COMPILE_TEST
- depends on GPIOLIB
select PCIE_DW_HOST
help
Say Y here if you want PCIe controller support for the SiFive
Powered by blists - more mailing lists