linux-kernel - [PATCH 1/3] hwmon: (pmbus) Add new flag PMBUS_READ_STATUS_AFTER_FAILED

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed,  5 May 2021 20:32:46 +0200
From:   Erik Rosen <erik.rosen@...ormote.com>
To:     Jean Delvare <jdelvare@...e.com>,
        Guenter Roeck <linux@...ck-us.net>,
        Jonathan Corbet <corbet@....net>, linux-hwmon@...r.kernel.org,
        linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     Erik Rosen <erik.rosen@...ormote.com>
Subject: [PATCH 1/3] hwmon: (pmbus) Add new flag PMBUS_READ_STATUS_AFTER_FAILED_CHECK

Some PMBus chips end up in an undefined state when trying to read an
unsupported register. For such chips, it is necessary to reset the
chip pmbus controller to a known state after a failed register check.
This can be done by reading a known register. By setting this flag the
driver will try to read the STATUS register after each failed
register check. This read may fail, but it will put the chip into a
known state.

Signed-off-by: Erik Rosen <erik.rosen@...ormote.com>
---
 drivers/hwmon/pmbus/pmbus_core.c |  2 ++
 include/linux/pmbus.h            | 13 +++++++++++++
 2 files changed, 15 insertions(+)

diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index aadea85fe630..cb0b3c7c3434 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -512,6 +512,8 @@ static bool pmbus_check_register(struct i2c_client *client,
 	rv = func(client, page, reg);
 	if (rv >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK))
 		rv = pmbus_check_status_cml(client);
+	if (rv < 0 && (data->flags & PMBUS_READ_STATUS_AFTER_FAILED_CHECK))
+		data->read_status(client, -1);
 	pmbus_clear_fault_page(client, -1);
 	return rv >= 0;
 }
diff --git a/include/linux/pmbus.h b/include/linux/pmbus.h
index 12cbbf305969..edd7c84fef65 100644
--- a/include/linux/pmbus.h
+++ b/include/linux/pmbus.h
@@ -43,6 +43,19 @@
  */
 #define PMBUS_NO_CAPABILITY			BIT(2)
 
+/*
+ * PMBUS_READ_STATUS_AFTER_FAILED_CHECK
+ *
+ * Some PMBus chips end up in an undefined state when trying to read an
+ * unsupported register. For such chips, it is necessary to reset the
+ * chip pmbus controller to a known state after a failed register check.
+ * This can be done by reading a known register. By setting this flag the
+ * driver will try to read the STATUS register after each failed
+ * register check. This read may fail, but it will put the chip in a
+ * known state.
+ */
+#define PMBUS_READ_STATUS_AFTER_FAILED_CHECK	BIT(3)
+
 struct pmbus_platform_data {
 	u32 flags;		/* Device specific flags */
 
-- 
2.20.1