| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 5 May 2021 11:46:13 -0400
From: Waiman Long <longman@...hat.com>
To: Johannes Weiner <hannes@...xchg.org>,
Michal Hocko <mhocko@...nel.org>,
Vladimir Davydov <vdavydov.dev@...il.com>,
Andrew Morton <akpm@...ux-foundation.org>,
Christoph Lameter <cl@...ux.com>,
Pekka Enberg <penberg@...nel.org>,
David Rientjes <rientjes@...gle.com>,
Joonsoo Kim <iamjoonsoo.kim@....com>,
Vlastimil Babka <vbabka@...e.cz>, Roman Gushchin <guro@...com>,
Shakeel Butt <shakeelb@...gle.com>
Cc: linux-kernel@...r.kernel.org, cgroups@...r.kernel.org,
linux-mm@...ck.org, Waiman Long <longman@...hat.com>
Subject: [PATCH v3 2/2] mm: memcg/slab: Create a new set of kmalloc-cg-<n> caches
There are currently two problems in the way the objcg pointer array
(memcg_data) in the page structure is being allocated and freed.
On its allocation, it is possible that the allocated objcg pointer
array comes from the same slab that requires memory accounting. If this
happens, the slab will never become empty again as there is at least
one object left (the obj_cgroup array) in the slab.
When it is freed, the objcg pointer array object may be the last one
in its slab and hence causes kfree() to be called again. With the
right workload, the slab cache may be set up in a way that allows the
recursive kfree() calling loop to nest deep enough to cause a kernel
stack overflow and panic the system.
One way to solve this problem is to split the kmalloc-<n> caches
(KMALLOC_NORMAL) into two separate sets - a new set of kmalloc-<n>
(KMALLOC_NORMAL) caches for non-accounted objects only and a new set of
kmalloc-cg-<n> (KMALLOC_CGROUP) caches for accounted objects only. All
the other caches can still allow a mix of accounted and non-accounted
objects.
With this change, all the objcg pointer array objects will come from
KMALLOC_NORMAL caches which won't have their objcg pointer arrays. So
both the recursive kfree() problem and non-freeable slab problem are
gone. Since both the KMALLOC_NORMAL and KMALLOC_CGROUP caches no longer
have mixed accounted and unaccounted objects, this will slightly reduce
the number of objcg pointer arrays that need to be allocated and save
a bit of memory.
The new KMALLOC_CGROUP is added between KMALLOC_NORMAL and
KMALLOC_RECLAIM so that the first for loop in create_kmalloc_caches()
will include the newly added caches without change.
Suggested-by: Vlastimil Babka <vbabka@...e.cz>
Signed-off-by: Waiman Long <longman@...hat.com>
---
include/linux/slab.h | 42 ++++++++++++++++++++++++++++++++++--------
mm/slab_common.c | 23 +++++++++++++++--------
2 files changed, 49 insertions(+), 16 deletions(-)
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 0c97d788762c..f2d9ebc34f5c 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -305,9 +305,16 @@ static inline void __check_heap_object(const void *ptr, unsigned long n,
/*
* Whenever changing this, take care of that kmalloc_type() and
* create_kmalloc_caches() still work as intended.
+ *
+ * KMALLOC_NORMAL is for non-accounted objects only whereas KMALLOC_CGROUP
+ * is for accounted objects only. All the other kmem caches can have both
+ * accounted and non-accounted objects.
*/
enum kmalloc_cache_type {
KMALLOC_NORMAL = 0,
+#ifdef CONFIG_MEMCG_KMEM
+ KMALLOC_CGROUP,
+#endif
KMALLOC_RECLAIM,
#ifdef CONFIG_ZONE_DMA
KMALLOC_DMA,
@@ -315,28 +322,47 @@ enum kmalloc_cache_type {
NR_KMALLOC_TYPES
};
+#ifndef CONFIG_MEMCG_KMEM
+#define KMALLOC_CGROUP KMALLOC_NORMAL
+#endif
+#ifndef CONFIG_ZONE_DMA
+#define KMALLOC_DMA KMALLOC_NORMAL
+#endif
+
#ifndef CONFIG_SLOB
extern struct kmem_cache *
kmalloc_caches[NR_KMALLOC_TYPES][KMALLOC_SHIFT_HIGH + 1];
+/*
+ * Define gfp bits that should not be set for KMALLOC_NORMAL.
+ */
+#define KMALLOC_NOT_NORMAL_BITS \
+ (__GFP_RECLAIMABLE | \
+ (IS_ENABLED(CONFIG_ZONE_DMA) ? __GFP_DMA : 0) | \
+ (IS_ENABLED(CONFIG_MEMCG_KMEM) ? __GFP_ACCOUNT : 0))
+
static __always_inline enum kmalloc_cache_type kmalloc_type(gfp_t flags)
{
-#ifdef CONFIG_ZONE_DMA
/*
* The most common case is KMALLOC_NORMAL, so test for it
* with a single branch for both flags.
*/
- if (likely((flags & (__GFP_DMA | __GFP_RECLAIMABLE)) == 0))
+ if (likely((flags & KMALLOC_NOT_NORMAL_BITS) == 0))
return KMALLOC_NORMAL;
/*
- * At least one of the flags has to be set. If both are, __GFP_DMA
- * is more important.
+ * At least one of the flags has to be set. Their priorities in
+ * decreasing order are:
+ * 1) __GFP_DMA
+ * 2) __GFP_RECLAIMABLE
+ * 3) __GFP_ACCOUNT
*/
- return flags & __GFP_DMA ? KMALLOC_DMA : KMALLOC_RECLAIM;
-#else
- return flags & __GFP_RECLAIMABLE ? KMALLOC_RECLAIM : KMALLOC_NORMAL;
-#endif
+ if (IS_ENABLED(CONFIG_ZONE_DMA) && (flags & __GFP_DMA))
+ return KMALLOC_DMA;
+ if (!IS_ENABLED(CONFIG_MEMCG_KMEM) || (flags & __GFP_RECLAIMABLE))
+ return KMALLOC_RECLAIM;
+ else
+ return KMALLOC_CGROUP;
}
/*
diff --git a/mm/slab_common.c b/mm/slab_common.c
index f8833d3e5d47..d750e3ba7af5 100644
--- a/mm/slab_common.c
+++ b/mm/slab_common.c
@@ -727,21 +727,25 @@ struct kmem_cache *kmalloc_slab(size_t size, gfp_t flags)
}
#ifdef CONFIG_ZONE_DMA
-#define INIT_KMALLOC_INFO(__size, __short_size) \
-{ \
- .name[KMALLOC_NORMAL] = "kmalloc-" #__short_size, \
- .name[KMALLOC_RECLAIM] = "kmalloc-rcl-" #__short_size, \
- .name[KMALLOC_DMA] = "dma-kmalloc-" #__short_size, \
- .size = __size, \
-}
+#define KMALLOC_DMA_NAME(sz) .name[KMALLOC_DMA] = "dma-kmalloc-" #sz,
+#else
+#define KMALLOC_DMA_NAME(sz)
+#endif
+
+#ifdef CONFIG_MEMCG_KMEM
+#define KMALLOC_CGROUP_NAME(sz) .name[KMALLOC_CGROUP] = "kmalloc-cg-" #sz,
#else
+#define KMALLOC_CGROUP_NAME(sz)
+#endif
+
#define INIT_KMALLOC_INFO(__size, __short_size) \
{ \
.name[KMALLOC_NORMAL] = "kmalloc-" #__short_size, \
.name[KMALLOC_RECLAIM] = "kmalloc-rcl-" #__short_size, \
+ KMALLOC_CGROUP_NAME(__short_size) \
+ KMALLOC_DMA_NAME(__short_size) \
.size = __size, \
}
-#endif
/*
* kmalloc_info[] is to make slub_debug=,kmalloc-xx option work at boot time.
@@ -847,6 +851,9 @@ void __init create_kmalloc_caches(slab_flags_t flags)
int i;
enum kmalloc_cache_type type;
+ /*
+ * Including KMALLOC_CGROUP if CONFIG_MEMCG_KMEM defined
+ */
for (type = KMALLOC_NORMAL; type <= KMALLOC_RECLAIM; type++) {
for (i = KMALLOC_SHIFT_LOW; i <= KMALLOC_SHIFT_HIGH; i++) {
if (!kmalloc_caches[type][i])
--
2.18.1
Powered by blists - more mailing lists