linux-kernel - [PATCH v3 2/5] ARM: dts: aspeed: ast2600evb: Add comment for gpio regulator of sdhci

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210506100312.1638-3-steven_lee@aspeedtech.com>
Date:   Thu, 6 May 2021 18:03:09 +0800
From:   Steven Lee <steven_lee@...eedtech.com>
To:     Andrew Jeffery <andrew@...id.au>,
        Ulf Hansson <ulf.hansson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Joel Stanley <joel@....id.au>,
        "Adrian Hunter" <adrian.hunter@...el.com>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        Ryan Chen <ryanchen.aspeed@...il.com>,
        "moderated list:ASPEED SD/MMC DRIVER" <linux-aspeed@...ts.ozlabs.org>,
        "moderated list:ASPEED SD/MMC DRIVER" <openbmc@...ts.ozlabs.org>,
        "open list:ASPEED SD/MMC DRIVER" <linux-mmc@...r.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        "moderated list:ARM/ASPEED MACHINE SUPPORT" 
        <linux-arm-kernel@...ts.infradead.org>,
        open list <linux-kernel@...r.kernel.org>
CC:     <steven_lee@...eedtech.com>, <Hongweiz@....com>,
        <ryan_chen@...eedtech.com>, <chin-ting_kuo@...eedtech.com>
Subject: [PATCH v3 2/5] ARM: dts: aspeed: ast2600evb: Add comment for gpio regulator of sdhci

Add the description for describing the AST2600-A2 EVB reference design of
GPIO regulators.

Signed-off-by: Steven Lee <steven_lee@...eedtech.com>
---
 arch/arm/boot/dts/aspeed-ast2600-evb.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
index 2772796e215e..1ae0facc3d5f 100644
--- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
@@ -104,6 +104,21 @@
 	status = "okay";
 };
 
+/*
+ * The signal voltage of sdhci0 and sdhci1 on AST2600-A2 EVB is able to be
+ * toggled by GPIO pins.
+ * In the reference design, GPIOV0 of AST2600-A2 EVB is connected to the
+ * power load switch that providing 3.3v to sdhci0 vdd, GPIOV1 is connected to
+ * a 1.8v and a 3.3v power load switch that providing signal voltage to
+ * sdhci0 bus.
+ * If GPIOV0 is active high, sdhci0 is enabled, otherwise, sdhci0 is disabled.
+ * If GPIOV1 is active high, 3.3v power load switch is enabled, sdhci0 signal
+ * voltage is 3.3v, otherwise, 1.8v power load switch will be enabled,
+ * sdhci0 signal voltage becomes 1.8v.
+ * AST2600-A2 EVB also support toggling signal voltage for sdhci1.
+ * The design is the same as sdhci0, it uses GPIOV2 as power-gpio and GPIOV3
+ * as power-switch-gpio.
+ */
 &emmc {
 	non-removable;
 	bus-width = <4>;
-- 
2.17.1