linux-kernel - [PATCH 0/3] drm/i915/display: Try YCbCr420 color when RGB fails

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210506172325.1995964-1-wse@tuxedocomputers.com>
Date:   Thu,  6 May 2021 19:23:22 +0200
From:   Werner Sembach <wse@...edocomputers.com>
To:     ville.syrjala@...ux.intel.com, airlied@...ux.ie, daniel@...ll.ch,
        intel-gfx@...ts.freedesktop.org, dri-devel@...ts.freedesktop.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH 0/3] drm/i915/display: Try YCbCr420 color when RGB fails

When encoder validation of a display mode fails, retry with less bandwidth
heavy YCbCr420 color mode, if available. This enables some HDMI 1.4 setups
to support 4k60Hz output, which previously failed silently.

AMDGPU had nearly the exact same issue. This problem description is
therefore copied from my commit message of the AMDGPU patch.

On some setups, while the monitor and the gpu support display modes with
pixel clocks of up to 600MHz, the link encoder might not. This prevents
YCbCr444 and RGB encoding for 4k60Hz, but YCbCr420 encoding might still be
possible. However, which color mode is used is decided before the link
encoder capabilities are checked. This patch fixes the problem by retrying
to find a display mode with YCbCr420 enforced and using it, if it is
valid.

This patchset is revision 5. Only change to 4 is a small whitespace error fix.
Resend because automation tools did not work with wrong e-mail format used
before.