| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <0285BA82-111D-4CA9-9C74-E6BBFDD0FB42@holtmann.org>
Date: Fri, 7 May 2021 09:00:22 +0200
From: Marcel Holtmann <marcel@...tmann.org>
To: Venkata Lakshmi Narayana Gubba <gubbaven@...eaurora.org>
Cc: Johan Hedberg <johan.hedberg@...il.com>,
devicetree@...r.kernel.org, mka@...omium.org,
linux-kernel@...r.kernel.org, linux-bluetooth@...r.kernel.org,
hemantg@...eaurora.org, linux-arm-msm@...r.kernel.org,
bgodavar@...eaurora.org, rjliao@...eaurora.org,
hbandi@...eaurora.org, abhishekpandit@...omium.org
Subject: Re: [PATCH v3 2/5] Bluetooth: btqca: Add support for firmware image
with mbn type for WCN6750
Hi Venkata,
> 1. Added support to download firmware image with mbn type for wcn6750
> as it supports mbn type image.
> 2. If mbn type image is not present then check for tlv type image.
> 3. Added debug logs for mbn type image.
>
> Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@...eaurora.org>
> ---
> drivers/bluetooth/btqca.c | 69 +++++++++++++++++++++++++++++++++++------------
> drivers/bluetooth/btqca.h | 3 ++-
> 2 files changed, 54 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index fce808c..320c555 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -182,7 +182,8 @@ int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
> }
> EXPORT_SYMBOL_GPL(qca_send_pre_shutdown_cmd);
>
> -static void qca_tlv_check_data(struct qca_fw_config *config,
> +static void qca_tlv_check_data(struct hci_dev *hdev,
> + struct qca_fw_config *config,
> const struct firmware *fw, enum qca_btsoc_type soc_type)
> {
> const u8 *data;
> @@ -194,19 +195,21 @@ static void qca_tlv_check_data(struct qca_fw_config *config,
> struct tlv_type_nvm *tlv_nvm;
> uint8_t nvm_baud_rate = config->user_baud_rate;
>
> - tlv = (struct tlv_type_hdr *)fw->data;
> -
> - type_len = le32_to_cpu(tlv->type_len);
> - length = (type_len >> 8) & 0x00ffffff;
> -
> - BT_DBG("TLV Type\t\t : 0x%x", type_len & 0x000000ff);
> - BT_DBG("Length\t\t : %d bytes", length);
> -
> config->dnld_mode = QCA_SKIP_EVT_NONE;
> config->dnld_type = QCA_SKIP_EVT_NONE;
>
> switch (config->type) {
> + case ELF_TYPE_PATCH:
> + config->dnld_mode = QCA_SKIP_EVT_VSE_CC;
> + config->dnld_type = QCA_SKIP_EVT_VSE_CC;
> +
> + bt_dev_dbg(hdev, "File Class : 0x%x", fw->data[4]);
> + bt_dev_dbg(hdev, "Data Encoding : 0x%x", fw->data[5]);
> + bt_dev_dbg(hdev, "File version : 0x%x", fw->data[6]);
> + break;
> case TLV_TYPE_PATCH:
> + tlv = (struct tlv_type_hdr *)fw->data;
Is this casting always necessary.
> + type_len = le32_to_cpu(tlv->type_len);
> tlv_patch = (struct tlv_type_patch *)tlv->data;
>
> /* For Rome version 1.1 to 3.1, all segment commands
> @@ -218,6 +221,7 @@ static void qca_tlv_check_data(struct qca_fw_config *config,
> config->dnld_mode = tlv_patch->download_mode;
> config->dnld_type = config->dnld_mode;
>
> + BT_DBG("TLV Type\t\t : 0x%x", type_len & 0x000000ff);
> BT_DBG("Total Length : %d bytes",
> le32_to_cpu(tlv_patch->total_size));
> BT_DBG("Patch Data Length : %d bytes",
> @@ -243,6 +247,14 @@ static void qca_tlv_check_data(struct qca_fw_config *config,
> break;
>
> case TLV_TYPE_NVM:
> + tlv = (struct tlv_type_hdr *)fw->data;
> +
> + type_len = le32_to_cpu(tlv->type_len);
> + length = (type_len >> 8) & 0x00ffffff;
> +
> + BT_DBG("TLV Type\t\t : 0x%x", type_len & 0x000000ff);
> + BT_DBG("Length\t\t : %d bytes", length);
> +
> idx = 0;
> data = tlv->data;
> while (idx < length) {
> @@ -387,7 +399,8 @@ static int qca_inject_cmd_complete_event(struct hci_dev *hdev)
>
> static int qca_download_firmware(struct hci_dev *hdev,
> struct qca_fw_config *config,
> - enum qca_btsoc_type soc_type)
> + enum qca_btsoc_type soc_type,
> + u8 rom_ver)
> {
> const struct firmware *fw;
> const u8 *segment;
> @@ -397,12 +410,30 @@ static int qca_download_firmware(struct hci_dev *hdev,
>
> ret = request_firmware(&fw, config->fwname, &hdev->dev);
> if (ret) {
> - bt_dev_err(hdev, "QCA Failed to request file: %s (%d)",
> - config->fwname, ret);
> - return ret;
> + /* For WCN6750, if mbn file is not present then check for
> + * tlv file.
> + */
> + if (soc_type == QCA_WCN6750 && config->type == ELF_TYPE_PATCH) {
> + bt_dev_dbg(hdev, "QCA Failed to request file: %s (%d)",
> + config->fwname, ret);
> + config->type = TLV_TYPE_PATCH;
> + snprintf(config->fwname, sizeof(config->fwname),
> + "qca/msbtfw%02x.tlv", rom_ver);
> + bt_dev_info(hdev, "QCA Downloading %s", config->fwname);
> + ret = request_firmware(&fw, config->fwname, &hdev->dev);
> + if (ret) {
> + bt_dev_err(hdev, "QCA Failed to request file: %s (%d)",
> + config->fwname, ret);
> + return ret;
> + }
> + } else {
> + bt_dev_err(hdev, "QCA Failed to request file: %s (%d)",
> + config->fwname, ret);
> + return ret;
> + }
> }
>
> - qca_tlv_check_data(config, fw, soc_type);
> + qca_tlv_check_data(hdev, config, fw, soc_type);
>
> segment = fw->data;
> remain = fw->size;
> @@ -520,14 +551,18 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> } else if (soc_type == QCA_WCN6750) {
> rom_ver = ((soc_ver & 0x00000f00) >> 0x04) |
> (soc_ver & 0x0000000f);
> + /* Choose mbn file by default.If mbn file is not found
> + * then choose tlv file
> + */
> + config.type = ELF_TYPE_PATCH;
> snprintf(config.fwname, sizeof(config.fwname),
> - "qca/msbtfw%02x.tlv", rom_ver);
> + "qca/msbtfw%02x.mbn", rom_ver);
> } else {
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/rampatch_%08x.bin", soc_ver);
> }
>
> - err = qca_download_firmware(hdev, &config, soc_type);
> + err = qca_download_firmware(hdev, &config, soc_type, rom_ver);
> if (err < 0) {
> bt_dev_err(hdev, "QCA Failed to download patch (%d)", err);
> return err;
> @@ -560,7 +595,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/nvm_%08x.bin", soc_ver);
>
> - err = qca_download_firmware(hdev, &config, soc_type);
> + err = qca_download_firmware(hdev, &config, soc_type, rom_ver);
> if (err < 0) {
> bt_dev_err(hdev, "QCA Failed to download NVM (%d)", err);
> return err;
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
> index dd82d2c..5a5e699 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -80,7 +80,8 @@ enum qca_tlv_dnld_mode {
>
> enum qca_tlv_type {
> TLV_TYPE_PATCH = 1,
> - TLV_TYPE_NVM
> + TLV_TYPE_NVM,
> + ELF_TYPE_PATCH
> };
If you end the enum in a , then future diffs only show a single line of addition. So please ELF_TYPE_PATCH,.
Regards
Marcel
Powered by blists - more mailing lists