[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210508123743.18128-5-jbx6244@gmail.com>
Date: Sat, 8 May 2021 14:37:43 +0200
From: Johan Jonker <jbx6244@...il.com>
To: heiko@...ech.de
Cc: robh+dt@...nel.org, linus.walleij@...aro.org,
bgolaszewski@...libre.com, jay.xu@...k-chips.com,
shawn.lin@...k-chips.com, david.wu@...k-chips.com,
zhangqing@...k-chips.com, huangtao@...k-chips.com,
cl@...k-chips.com, linux-gpio@...r.kernel.org,
linux-rockchip@...ts.infradead.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v3 4/4] arm64: dts: rename grf-gpio nodename in rk3328.dtsi
A test with the command below gives this error:
/arch/arm64/boot/dts/rockchip/rk3328-a1.dt.yaml: syscon@...00000:
grf-gpio: {'compatible': ['rockchip,rk3328-grf-gpio'],
'gpio-controller': True, '#gpio-cells': [[2]], 'phandle': [[68]]} is not
of type 'array'
>From schema:
~/.local/lib/python3.5/site-packages/dtschema/schemas/gpio/gpio-consumer.yaml
Due to the regex "(?<!,nr)-gpios?$" anything that ends on
'-gpio', '-gpios' gives a match.
Rename 'grf-gpio' nodename to generic 'gpio'
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/
schemas/gpio/gpio-consumer.yaml
Signed-off-by: Johan Jonker <jbx6244@...il.com>
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 4ce49aae7..2e458fb87 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -291,7 +291,7 @@
status = "disabled";
};
- grf_gpio: grf-gpio {
+ grf_gpio: gpio {
compatible = "rockchip,rk3328-grf-gpio";
gpio-controller;
#gpio-cells = <2>;
--
2.11.0
Powered by blists - more mailing lists