| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 8 May 2021 10:46:57 +0800
From: 乱石 <zhangliguang@...ux.alibaba.com>
To: Jarkko Sakkinen <jarkko@...nel.org>
Cc: Peter Huewe <peterhuewe@....de>, Jason Gunthorpe <jgg@...pe.ca>,
linux-integrity@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] tpm_tis_spi: set default probe function if device id not
match
Hi,
在 2021/5/8 10:01, Jarkko Sakkinen 写道:
> On Fri, May 07, 2021 at 10:52:55PM +0800, Liguang Zhang wrote:
>> In DSDT table, TPM _CID was SMO0768, and no _HID definition. After a
>> kernel upgrade from 4.19 to 5.10, TPM probe function was changed which
>> causes device probe fails. In order to make newer kernel to be
>> compatible with the older acpi definition, it would be best set default
>> probe function.
>>
>> Signed-off-by: Liguang Zhang <zhangliguang@...ux.alibaba.com>
>> ---
>> drivers/char/tpm/tpm_tis_spi_main.c | 12 ++++++++----
>> 1 file changed, 8 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/char/tpm/tpm_tis_spi_main.c b/drivers/char/tpm/tpm_tis_spi_main.c
>> index 3856f6ebcb34..da632a582621 100644
>> --- a/drivers/char/tpm/tpm_tis_spi_main.c
>> +++ b/drivers/char/tpm/tpm_tis_spi_main.c
>> @@ -240,10 +240,14 @@ static int tpm_tis_spi_driver_probe(struct spi_device *spi)
>> tpm_tis_spi_probe_func probe_func;
>>
>> probe_func = of_device_get_match_data(&spi->dev);
>> - if (!probe_func && spi_dev_id)
>> - probe_func = (tpm_tis_spi_probe_func)spi_dev_id->driver_data;
>> - if (!probe_func)
>> - return -ENODEV;
>> + if (!probe_func) {
>> + if (spi_dev_id) {
>> + probe_func = (tpm_tis_spi_probe_func)spi_dev_id->driver_data;
>> + if (!probe_func)
>> + return -ENODEV;
> Perhaps also hear fallback to tpm_tis_spi_probe?
Yes, I do not think of a good way. Do you have any suggestions?
The arm platform is kunpeng-920, detail dsdt information here:
Device (SPI0)
{
Name (_HID, "HISI0173") // _HID: Hardware ID
Name (_ADR, Zero) // _ADR: Address
Name (_UID, Zero) // _UID: Unique ID
Name (RBUF, ResourceTemplate ()
{
GpioIo (Exclusive, PullUp, 0x0000, 0x0000,
IoRestrictionNone,
"\\_SB.GPO1", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0006
}
QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, NonCacheable, ReadWrite,
0x0000000000000000, // Granularity
0x00000002011A0000, // Range Minimum
0x00000002011AFFFF, // Range Maximum
0x0000000000000000, // Translation Offset
0x0000000000010000, // Length
,, , AddressRangeMemory, TypeStatic)
Interrupt (ResourceConsumer, Level, ActiveHigh,
Exclusive, ,, )
{
0x000001EB,
}
})
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource
Settings
{
Return (RBUF) /* \_SB_.SPI0.RBUF */
}
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /*
Device Properties for _DSD */,
Package (0x03)
{
Package (0x02)
{
"reg-io-width",
0x04
},
Package (0x02)
{
"num-cs",
One
},
Package (0x02)
{
"cs-gpios",
Package (0x04)
{
SPI0,
Zero,
Zero,
Zero
}
}
}
})
}
Scope (SPI0)
{
Device (TPM)
{
Name (_ADR, Zero) // _ADR: Address
Name (_CID, Package (0x01) // _CID: Compatible ID
{
"SMO0768"
})
Name (_UID, Zero) // _UID: Unique ID
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /*
Device Properties for _DSD */,
Package (0x00){}
})
Method (_CRS, 0, NotSerialized) // _CRS: Current
Resource Settings
{
Name (RBUF, ResourceTemplate ()
{
SpiSerialBusV2 (0x0000, PolarityLow,
FourWireMode, 0x08,
ControllerInitiated, 0x000F4240,
ClockPolarityLow,
ClockPhaseFirst, "\\_SB.SPI0",
0x00, ResourceConsumer, , Exclusive,
)
})
Return (RBUF) /* \_SB_.SPI0.TPM_._CRS.RBUF */
}
Method (_STA, 0, NotSerialized) // _STA: Status
{
If ((TPEN == One))
{
Return (0x0F)
}
Else
{
Return (Zero)
}
}
}
}
}
Regards
Liguang
>
>> + } else
>> + probe_func = tpm_tis_spi_probe;
>> + }
>>
>> return probe_func(spi);
>> }
>> --
>> 2.19.1.6.gb485710b
>>
>>
> /Jarkko
Powered by blists - more mailing lists