Date:   Mon, 10 May 2021 12:26:37 +0200
From:   Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
To:     Linux Doc Mailing List <linux-doc@...r.kernel.org>
Cc:     Mauro Carvalho Chehab <mchehab+huawei@...nel.org>,
        "Jonathan Corbet" <corbet@....net>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        Randy Dunlap <rdunlap@...radead.org>,
        linux-kernel@...r.kernel.org, linux-media@...r.kernel.org
Subject: [PATCH 25/53] docs: userspace-api: media: dvb: avoid using UTF-8 chars

While UTF-8 characters can be used at the Linux documentation,
the best is to use them only when ASCII doesn't offer a good replacement.
So, replace the occurences of the following UTF-8 characters:

	- U+00a0 (' '): NO-BREAK SPACE
	- U+2019 ('’'): RIGHT SINGLE QUOTATION MARK
	- U+201c ('“'): LEFT DOUBLE QUOTATION MARK
	- U+201d ('”'): RIGHT DOUBLE QUOTATION MARK

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
---
 .../userspace-api/media/dvb/audio-set-bypass-mode.rst       | 2 +-
 Documentation/userspace-api/media/dvb/audio.rst             | 2 +-
 Documentation/userspace-api/media/dvb/dmx-fopen.rst         | 2 +-
 Documentation/userspace-api/media/dvb/dmx-fread.rst         | 2 +-
 Documentation/userspace-api/media/dvb/dmx-set-filter.rst    | 2 +-
 Documentation/userspace-api/media/dvb/intro.rst             | 6 +++---
 Documentation/userspace-api/media/dvb/video.rst             | 2 +-
 7 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/Documentation/userspace-api/media/dvb/audio-set-bypass-mode.rst b/Documentation/userspace-api/media/dvb/audio-set-bypass-mode.rst
index ecac02f1b2fc..80d551a2053a 100644
--- a/Documentation/userspace-api/media/dvb/audio-set-bypass-mode.rst
+++ b/Documentation/userspace-api/media/dvb/audio-set-bypass-mode.rst
@@ -50,7 +50,7 @@ Description
 
 This ioctl call asks the Audio Device to bypass the Audio decoder and
 forward the stream without decoding. This mode shall be used if streams
-that can’t be handled by the Digital TV system shall be decoded. Dolby
+that can't be handled by the Digital TV system shall be decoded. Dolby
 DigitalTM streams are automatically forwarded by the Digital TV subsystem if
 the hardware can handle it.
 
diff --git a/Documentation/userspace-api/media/dvb/audio.rst b/Documentation/userspace-api/media/dvb/audio.rst
index eaae5675a47d..aa753336b31f 100644
--- a/Documentation/userspace-api/media/dvb/audio.rst
+++ b/Documentation/userspace-api/media/dvb/audio.rst
@@ -11,7 +11,7 @@ TV hardware. It can be accessed through ``/dev/dvb/adapter?/audio?``. Data
 types and ioctl definitions can be accessed by including
 ``linux/dvb/audio.h`` in your application.
 
-Please note that some Digital TV cards don’t have their own MPEG decoder, which
+Please note that some Digital TV cards don't have their own MPEG decoder, which
 results in the omission of the audio and video device.
 
 These ioctls were also used by V4L2 to control MPEG decoders implemented
diff --git a/Documentation/userspace-api/media/dvb/dmx-fopen.rst b/Documentation/userspace-api/media/dvb/dmx-fopen.rst
index 8f0a2b831d4a..50b36eb4371e 100644
--- a/Documentation/userspace-api/media/dvb/dmx-fopen.rst
+++ b/Documentation/userspace-api/media/dvb/dmx-fopen.rst
@@ -82,7 +82,7 @@ appropriately.
     :widths: 1 16
 
     -  -  ``EMFILE``
-       -  “Too many open files”, i.e. no more filters available.
+       -  "Too many open files", i.e. no more filters available.
 
 The generic error codes are described at the
 :ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/dmx-fread.rst b/Documentation/userspace-api/media/dvb/dmx-fread.rst
index 78e9daef595a..88c4cddf7c30 100644
--- a/Documentation/userspace-api/media/dvb/dmx-fread.rst
+++ b/Documentation/userspace-api/media/dvb/dmx-fread.rst
@@ -34,7 +34,7 @@ Description
 
 This system call returns filtered data, which might be section or Packetized
 Elementary Stream (PES) data. The filtered data is transferred from
-the driver’s internal circular buffer to ``buf``. The maximum amount of data
+the driver's internal circular buffer to ``buf``. The maximum amount of data
 to be transferred is implied by count.
 
 .. note::
diff --git a/Documentation/userspace-api/media/dvb/dmx-set-filter.rst b/Documentation/userspace-api/media/dvb/dmx-set-filter.rst
index f43455b7adae..1b8c8071b14f 100644
--- a/Documentation/userspace-api/media/dvb/dmx-set-filter.rst
+++ b/Documentation/userspace-api/media/dvb/dmx-set-filter.rst
@@ -37,7 +37,7 @@ parameters provided. A timeout may be defined stating number of seconds
 to wait for a section to be loaded. A value of 0 means that no timeout
 should be applied. Finally there is a flag field where it is possible to
 state whether a section should be CRC-checked, whether the filter should
-be a ”one-shot” filter, i.e. if the filtering operation should be
+be a "one-shot" filter, i.e. if the filtering operation should be
 stopped after the first section is received, and whether the filtering
 operation should be started immediately (without waiting for a
 :ref:`DMX_START` ioctl call). If a filter was previously set-up, this
diff --git a/Documentation/userspace-api/media/dvb/intro.rst b/Documentation/userspace-api/media/dvb/intro.rst
index a935f3914e56..6784ae79657c 100644
--- a/Documentation/userspace-api/media/dvb/intro.rst
+++ b/Documentation/userspace-api/media/dvb/intro.rst
@@ -107,7 +107,7 @@ Audio and video decoder
       a Systems on a Chip (SoC) integrated circuit.
 
       It may also not be needed for certain usages (e.g. for data-only
-      uses like “internet over satellite”).
+      uses like "internet over satellite").
 
 :ref:`stb_components` shows a crude schematic of the control and data
 flow between those components.
@@ -148,9 +148,9 @@ individual devices are called:
 
 -  ``/dev/dvb/adapterN/caM``,
 
-where ``N`` enumerates the Digital TV cards in a system starting from 0, and
+where ``N`` enumerates the Digital TV cards in a system starting from 0, and
 ``M`` enumerates the devices of each type within each adapter, starting
-from 0, too. We will omit the “``/dev/dvb/adapterN/``\ ” in the further
+from 0, too. We will omit the "``/dev/dvb/adapterN/``\ " in the further
 discussion of these devices.
 
 More details about the data structures and function calls of all the
diff --git a/Documentation/userspace-api/media/dvb/video.rst b/Documentation/userspace-api/media/dvb/video.rst
index 38a8d39a1d25..808705b769a1 100644
--- a/Documentation/userspace-api/media/dvb/video.rst
+++ b/Documentation/userspace-api/media/dvb/video.rst
@@ -16,7 +16,7 @@ stream, not its presentation on the TV or computer screen. On PCs this
 is typically handled by an associated video4linux device, e.g.
 **/dev/video**, which allows scaling and defining output windows.
 
-Some Digital TV cards don’t have their own MPEG decoder, which results in the
+Some Digital TV cards don't have their own MPEG decoder, which results in the
 omission of the audio and video device as well as the video4linux
 device.
 
-- 
2.30.2

Powered by blists - more mailing lists