| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 10 May 2021 12:00:37 +0800
From: "Peng Fan (OSS)" <peng.fan@....nxp.com>
To: robh+dt@...nel.org, shawnguo@...nel.org, s.hauer@...gutronix.de
Cc: kernel@...gutronix.de, festevam@...il.com, linux-imx@....com,
p.zabel@...gutronix.de, l.stach@...gutronix.de, krzk@...nel.org,
agx@...xcpu.org, marex@...x.de, andrew.smirnov@...il.com,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, ping.bai@....com,
frieder.schrempf@...tron.de, aford173@...il.com, abel.vesa@....com,
Peng Fan <peng.fan@....com>
Subject: [PATCH V3 05/13] soc: imx: gpcv2: wait for ADB400 handshake
From: Lucas Stach <l.stach@...gutronix.de>
New reference manuals show that there is actually a status bit for
the ADB400 handshake. Add a poll loop to wait for the ADB400 to
acknowledge our request.
[Peng Fan: i.MX8MM has blk ctl module, the handshake can only finish
after setting blk ctl. The blk ctl driver will set the bus clk bit and
the handshake will finish there. we just add a delay and suppose the
handshake will finish after that.]
Tested-by: Frieder Schrempf <frieder.schrempf@...tron.de>
Signed-off-by: Lucas Stach <l.stach@...gutronix.de>
Signed-off-by: Peng Fan <peng.fan@....com>
---
drivers/soc/imx/gpcv2.c | 47 ++++++++++++++++++++++++++++++++++-------
1 file changed, 39 insertions(+), 8 deletions(-)
diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index bcf1f338b0bf..c449cd0e1499 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -69,6 +69,9 @@
#define GPC_PU_PWRHSK 0x1fc
+#define IMX8M_GPU_HSK_PWRDNACKN BIT(26)
+#define IMX8M_VPU_HSK_PWRDNACKN BIT(25)
+#define IMX8M_DISP_HSK_PWRDNACKN BIT(24)
#define IMX8M_GPU_HSK_PWRDNREQN BIT(6)
#define IMX8M_VPU_HSK_PWRDNREQN BIT(5)
#define IMX8M_DISP_HSK_PWRDNREQN BIT(4)
@@ -112,7 +115,8 @@ struct imx_pgc_domain {
const struct {
u32 pxx;
u32 map;
- u32 hsk;
+ u32 hskreq;
+ u32 hskack;
} bits;
const int voltage;
@@ -172,9 +176,23 @@ static int imx_pgc_power_up(struct generic_pm_domain *genpd)
GPC_PGC_CTRL_PCR);
/* request the ADB400 to power up */
- if (domain->bits.hsk)
+ if (domain->bits.hskreq) {
regmap_update_bits(domain->regmap, GPC_PU_PWRHSK,
- domain->bits.hsk, domain->bits.hsk);
+ domain->bits.hskreq, domain->bits.hskreq);
+
+ /*
+ * ret = regmap_read_poll_timeout(domain->regmap, GPC_PU_PWRHSK, reg_val,
+ * (reg_val & domain->bits.hskack), 0,
+ * USEC_PER_MSEC);
+ * Technically we need the commented code to wait handshake. But that needs
+ * the BLK-CTL module BUS clk-en bit being set.
+ *
+ * There is a separate BLK-CTL module and we will have such a driver for it,
+ * that driver will set the BUS clk-en bit and handshake will be triggered
+ * automatically there. Just add a delay and suppose the handshake finish
+ * after that.
+ */
+ }
/* Disable reset clocks for all devices in the domain */
clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
@@ -204,9 +222,19 @@ static int imx_pgc_power_down(struct generic_pm_domain *genpd)
}
/* request the ADB400 to power down */
- if (domain->bits.hsk)
+ if (domain->bits.hskreq) {
regmap_clear_bits(domain->regmap, GPC_PU_PWRHSK,
- domain->bits.hsk);
+ domain->bits.hskreq);
+
+ ret = regmap_read_poll_timeout(domain->regmap, GPC_PU_PWRHSK,
+ reg_val,
+ !(reg_val & domain->bits.hskack),
+ 0, USEC_PER_MSEC);
+ if (ret) {
+ dev_err(domain->dev, "failed to power down ADB400\n");
+ goto out_clk_disable;
+ }
+ }
/* enable power control */
regmap_update_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
@@ -369,7 +397,8 @@ static const struct imx_pgc_domain imx8m_pgc_domains[] = {
.bits = {
.pxx = IMX8M_GPU_SW_Pxx_REQ,
.map = IMX8M_GPU_A53_DOMAIN,
- .hsk = IMX8M_GPU_HSK_PWRDNREQN,
+ .hskreq = IMX8M_GPU_HSK_PWRDNREQN,
+ .hskack = IMX8M_GPU_HSK_PWRDNACKN,
},
.pgc = IMX8M_PGC_GPU,
},
@@ -381,7 +410,8 @@ static const struct imx_pgc_domain imx8m_pgc_domains[] = {
.bits = {
.pxx = IMX8M_VPU_SW_Pxx_REQ,
.map = IMX8M_VPU_A53_DOMAIN,
- .hsk = IMX8M_VPU_HSK_PWRDNREQN,
+ .hskreq = IMX8M_VPU_HSK_PWRDNREQN,
+ .hskack = IMX8M_VPU_HSK_PWRDNACKN,
},
.pgc = IMX8M_PGC_VPU,
},
@@ -393,7 +423,8 @@ static const struct imx_pgc_domain imx8m_pgc_domains[] = {
.bits = {
.pxx = IMX8M_DISP_SW_Pxx_REQ,
.map = IMX8M_DISP_A53_DOMAIN,
- .hsk = IMX8M_DISP_HSK_PWRDNREQN,
+ .hskreq = IMX8M_DISP_HSK_PWRDNREQN,
+ .hskack = IMX8M_DISP_HSK_PWRDNACKN,
},
.pgc = IMX8M_PGC_DISP,
},
--
2.30.0
Powered by blists - more mailing lists