| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAAOTY_94qU7Qm8yLjKOypTAP8m2yT27n2xainc70=buMCjMTcg@mail.gmail.com>
Date: Wed, 12 May 2021 00:59:37 +0800
From: Chun-Kuang Hu <chunkuang.hu@...nel.org>
To: Rex-BC Chen <rex-bc.chen@...iatek.com>
Cc: Chun-Kuang Hu <chunkuang.hu@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
DTML <devicetree@...r.kernel.org>,
Linux ARM <linux-arm-kernel@...ts.infradead.org>,
"moderated list:ARM/Mediatek SoC support"
<linux-mediatek@...ts.infradead.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
Project_Global_Chrome_Upstream_Group@...iatek.com,
Jitao Shi <jitao.shi@...iatek.com>
Subject: Re: [v3 RESEND,PATCH 3/3] drm/mediatek: dpi: add bus format negotiation
Hi, Rex:
Rex-BC Chen <rex-bc.chen@...iatek.com> 於 2021年4月29日 週四 下午12:16寫道：
>
> Add the atomic_get_output_bus_fmts, atomic_get_input_bus_fmts to negotiate
> the possible output and input formats for the current mode and monitor,
> and use the negotiated formats in a basic atomic_check callback.
>
> Signed-off-by: Jitao Shi <jitao.shi@...iatek.com>
> Signed-off-by: Rex-BC Chen <rex-bc.chen@...iatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_dpi.c | 92 ++++++++++++++++++++++++++++--
> 1 file changed, 87 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index c548780dd3a5..8822d9448ae8 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -536,6 +536,87 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
> return 0;
> }
>
> +#define MAX_OUTPUT_SEL_FORMATS 2
> +
> +static u32 *mtk_dpi_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge,
> + struct drm_bridge_state *bridge_state,
> + struct drm_crtc_state *crtc_state,
> + struct drm_connector_state *conn_state,
> + unsigned int *num_output_fmts)
> +{
> + u32 *output_fmts;
> + struct mtk_dpi *dpi = bridge_to_dpi(bridge);
> +
> + *num_output_fmts = 0;
> +
> + output_fmts = kcalloc(MAX_OUTPUT_SEL_FORMATS, sizeof(*output_fmts),
> + GFP_KERNEL);
> + if (!output_fmts)
> + return NULL;
> +
> + /* Default 8bit RGB fallback */
> + if (dpi->conf->dual_edge) {
> + output_fmts[0] = MEDIA_BUS_FMT_RGB888_2X12_LE;
> + output_fmts[1] = MEDIA_BUS_FMT_RGB888_2X12_BE;
> + *num_output_fmts = 2;
> + } else {
> + output_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24;
> + *num_output_fmts = 1;
> + }
> +
> + return output_fmts;
> +}
> +
> +#define MAX_INPUT_SEL_FORMATS 1
> +
> +static u32 *mtk_dpi_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
> + struct drm_bridge_state *bridge_state,
> + struct drm_crtc_state *crtc_state,
> + struct drm_connector_state *conn_state,
> + u32 output_fmt,
> + unsigned int *num_input_fmts)
> +{
> + u32 *input_fmts;
> +
> + *num_input_fmts = 0;
> +
> + input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts),
> + GFP_KERNEL);
> + if (!input_fmts)
> + return NULL;
> +
> + *num_input_fmts = 1;
> + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24;
> +
> + return input_fmts;
> +}
> +
> +static int mtk_dpi_bridge_atomic_check(struct drm_bridge *bridge,
> + struct drm_bridge_state *bridge_state,
> + struct drm_crtc_state *crtc_state,
> + struct drm_connector_state *conn_state)
> +{
> + struct mtk_dpi *dpi = bridge->driver_private;
> + unsigned int out_bus_format;
> +
> + out_bus_format = bridge_state->output_bus_cfg.format;
> +
> + dev_dbg(dpi->dev, "input format 0x%04x, output format 0x%04x\n",
> + bridge_state->input_bus_cfg.format,
> + bridge_state->output_bus_cfg.format);
> +
> + dpi->ddr_edge_sel = (out_bus_format == MEDIA_BUS_FMT_RGB888_2X12_LE) ?
> + true : false;
I would like to keep the out_bus_format rather than keep ddr_edge_sel,
and in mtk_dpi_dual_edge() use dpi->out_bus_format to decide edge
selection.
Regards,
Chun-Kuang.
> +
> + dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
> + dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
> + dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB;
> + dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
> +
> + return 0;
> +}
> +
> static int mtk_dpi_bridge_attach(struct drm_bridge *bridge,
> enum drm_bridge_attach_flags flags)
> {
>
> @@ -574,6 +655,12 @@ static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = {
> .mode_set = mtk_dpi_bridge_mode_set,
> .disable = mtk_dpi_bridge_disable,
> .enable = mtk_dpi_bridge_enable,
> + .atomic_check = mtk_dpi_bridge_atomic_check,
> + .atomic_get_output_bus_fmts = mtk_dpi_bridge_atomic_get_output_bus_fmts,
> + .atomic_get_input_bus_fmts = mtk_dpi_bridge_atomic_get_input_bus_fmts,
> + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
> + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
> + .atomic_reset = drm_atomic_helper_bridge_reset,
> };
>
> void mtk_dpi_start(struct device *dev)
> @@ -620,11 +707,6 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
> }
> drm_connector_attach_encoder(dpi->connector, &dpi->encoder);
>
> - dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
> - dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
> - dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB;
> - dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
> -
> return 0;
>
> err_cleanup:
> --
> 2.18.0
>
Powered by blists - more mailing lists