lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210511020500.17269-15-ansuelsmth@gmail.com>
Date:   Tue, 11 May 2021 04:04:49 +0200
From:   Ansuel Smith <ansuelsmth@...il.com>
To:     Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Vladimir Oltean <olteanv@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        netdev@...r.kernel.org (open list:NETWORKING DRIVERS),
        devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS), linux-kernel@...r.kernel.org (open list)
Cc:     Ansuel Smith <ansuelsmth@...il.com>
Subject: [RFC PATCH net-next v5 14/25] net: dsa: qca8k: add support for switch rev

qca8k internal phy driver require some special debug value to be set
based on the switch revision. Rework the switch id read function to
also read the chip revision.

Signed-off-by: Ansuel Smith <ansuelsmth@...il.com>
Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
---
 drivers/net/dsa/qca8k.c | 53 ++++++++++++++++++++++++++---------------
 drivers/net/dsa/qca8k.h |  7 ++++--
 2 files changed, 39 insertions(+), 21 deletions(-)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 10e3e1ca7e95..35ff4cf08786 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1579,12 +1579,40 @@ static const struct dsa_switch_ops qca8k_switch_ops = {
 	.phylink_mac_link_up	= qca8k_phylink_mac_link_up,
 };
 
+static int qca8k_read_switch_id(struct qca8k_priv *priv)
+{
+	const struct qca8k_match_data *data;
+	u32 val;
+	u8 id;
+
+	/* get the switches ID from the compatible */
+	data = of_device_get_match_data(priv->dev);
+	if (!data)
+		return -ENODEV;
+
+	val = qca8k_read(priv, QCA8K_REG_MASK_CTRL);
+	if (val < 0)
+		return -ENODEV;
+
+	id = QCA8K_MASK_CTRL_DEVICE_ID(val & QCA8K_MASK_CTRL_DEVICE_ID_MASK);
+	if (id != data->id) {
+		dev_err(priv->dev, "Switch id detected %x but expected %x", id, data->id);
+		return -ENODEV;
+	}
+
+	priv->switch_id = id;
+
+	/* Save revision to communicate to the internal PHY driver */
+	priv->switch_revision = (val & QCA8K_MASK_CTRL_REV_ID_MASK);
+
+	return 0;
+}
+
 static int
 qca8k_sw_probe(struct mdio_device *mdiodev)
 {
-	const struct qca8k_match_data *data;
 	struct qca8k_priv *priv;
-	u32 id;
+	int ret;
 
 	/* allocate the private data struct so that we can probe the switches
 	 * ID register
@@ -1610,24 +1638,11 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
 		gpiod_set_value_cansleep(priv->reset_gpio, 0);
 	}
 
-	/* get the switches ID from the compatible */
-	data = of_device_get_match_data(&mdiodev->dev);
-	if (!data)
-		return -ENODEV;
-
-	/* read the switches ID register */
-	id = qca8k_read(priv, QCA8K_REG_MASK_CTRL);
-	if (id < 0)
-		return id;
-
-	id >>= QCA8K_MASK_CTRL_ID_S;
-	id &= QCA8K_MASK_CTRL_ID_M;
-	if (id != data->id) {
-		dev_err(&mdiodev->dev, "Switch id detected %x but expected %x", id, data->id);
-		return -ENODEV;
-	}
+	/* Check the detected switch id */
+	ret = qca8k_read_switch_id(priv);
+	if (ret)
+		return ret;
 
-	priv->switch_id = id;
 	priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL);
 	if (!priv->ds)
 		return -ENOMEM;
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index eceeacfe2c5d..338277978ec0 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -30,8 +30,10 @@
 
 /* Global control registers */
 #define QCA8K_REG_MASK_CTRL				0x000
-#define   QCA8K_MASK_CTRL_ID_M				0xff
-#define   QCA8K_MASK_CTRL_ID_S				8
+#define   QCA8K_MASK_CTRL_REV_ID_MASK			GENMASK(7, 0)
+#define   QCA8K_MASK_CTRL_REV_ID(x)			((x) >> 0)
+#define   QCA8K_MASK_CTRL_DEVICE_ID_MASK		GENMASK(15, 8)
+#define   QCA8K_MASK_CTRL_DEVICE_ID(x)			((x) >> 8)
 #define QCA8K_REG_PORT0_PAD_CTRL			0x004
 #define QCA8K_REG_PORT5_PAD_CTRL			0x008
 #define QCA8K_REG_PORT6_PAD_CTRL			0x00c
@@ -251,6 +253,7 @@ struct qca8k_match_data {
 
 struct qca8k_priv {
 	u8 switch_id;
+	u8 switch_revision;
 	struct regmap *regmap;
 	struct mii_bus *bus;
 	struct ar8xxx_port_status port_sts[QCA8K_NUM_PORTS];
-- 
2.30.2

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ