lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210511020500.17269-24-ansuelsmth@gmail.com>
Date:   Tue, 11 May 2021 04:04:58 +0200
From:   Ansuel Smith <ansuelsmth@...il.com>
To:     Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Vladimir Oltean <olteanv@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        netdev@...r.kernel.org (open list:NETWORKING DRIVERS),
        devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS), linux-kernel@...r.kernel.org (open list)
Cc:     Ansuel Smith <ansuelsmth@...il.com>
Subject: [RFC PATCH net-next v5 23/25] net: dsa: qca8k: pass switch_revision info to phy dev_flags

Define get_phy_flags to pass switch_Revision needed to tweak the
internal PHY with debug values based on the revision.

Signed-off-by: Ansuel Smith <ansuelsmth@...il.com>
Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
---
 drivers/net/dsa/qca8k.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 920cdb1ff2b9..9da7eccfa558 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1732,6 +1732,22 @@ qca8k_port_vlan_del(struct dsa_switch *ds, int port,
 	return ret;
 }
 
+static u32 qca8k_get_phy_flags(struct dsa_switch *ds, int port)
+{
+	struct qca8k_priv *priv = ds->priv;
+
+	/* Communicate to the phy internal driver the switch revision.
+	 * Based on the switch revision different values needs to be
+	 * set to the dbg and mmd reg on the phy.
+	 * The first 2 bit are used to communicate the switch revision
+	 * to the phy driver.
+	 */
+	if (port > 0 && port < 6)
+		return priv->switch_revision;
+
+	return 0;
+}
+
 static enum dsa_tag_protocol
 qca8k_get_tag_protocol(struct dsa_switch *ds, int port,
 		       enum dsa_tag_protocol mp)
@@ -1765,6 +1781,7 @@ static const struct dsa_switch_ops qca8k_switch_ops = {
 	.phylink_mac_config	= qca8k_phylink_mac_config,
 	.phylink_mac_link_down	= qca8k_phylink_mac_link_down,
 	.phylink_mac_link_up	= qca8k_phylink_mac_link_up,
+	.get_phy_flags		= qca8k_get_phy_flags,
 };
 
 static int qca8k_read_switch_id(struct qca8k_priv *priv)
-- 
2.30.2

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ