| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210511214605.2937099-1-pgwipeout@gmail.com>
Date: Tue, 11 May 2021 17:46:06 -0400
From: Peter Geis <pgwipeout@...il.com>
To: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>
Cc: linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
linux-rockchip@...ts.infradead.org,
Peter Geis <pgwipeout@...il.com>
Subject: [PATCH] net: phy: add driver for Motorcomm yt8511 phy
Add a driver for the Motorcomm yt8511 phy that will be used in the
production Pine64 rk3566-quartz64 development board.
It supports gigabit transfer speeds, rgmii, and 125mhz clk output.
Signed-off-by: Peter Geis <pgwipeout@...il.com>
---
MAINTAINERS | 6 +++
drivers/net/phy/Kconfig | 6 +++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/motorcomm.c | 85 +++++++++++++++++++++++++++++++++++++
4 files changed, 98 insertions(+)
create mode 100644 drivers/net/phy/motorcomm.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 601b5ae0368a..2a2e406238fc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12388,6 +12388,12 @@ F: Documentation/userspace-api/media/drivers/meye*
F: drivers/media/pci/meye/
F: include/uapi/linux/meye.h
+MOTORCOMM PHY DRIVER
+M: Peter Geis <pgwipeout@...il.com>
+L: netdev@...r.kernel.org
+S: Maintained
+F: drivers/net/phy/motorcomm.c
+
MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD
S: Orphan
F: Documentation/driver-api/serial/moxa-smartio.rst
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 288bf405ebdb..16db9f8037b5 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -229,6 +229,12 @@ config MICROSEMI_PHY
help
Currently supports VSC8514, VSC8530, VSC8531, VSC8540 and VSC8541 PHYs
+config MOTORCOMM_PHY
+ tristate "Motorcomm PHYs"
+ help
+ Enables support for Motorcomm network PHYs.
+ Currently supports the YT8511 gigabit PHY.
+
config NATIONAL_PHY
tristate "National Semiconductor PHYs"
help
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index bcda7ed2455d..37ffbc6e3c87 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -70,6 +70,7 @@ obj-$(CONFIG_MICREL_PHY) += micrel.o
obj-$(CONFIG_MICROCHIP_PHY) += microchip.o
obj-$(CONFIG_MICROCHIP_T1_PHY) += microchip_t1.o
obj-$(CONFIG_MICROSEMI_PHY) += mscc/
+obj-$(CONFIG_MOTORCOMM_PHY) += motorcomm.o
obj-$(CONFIG_NATIONAL_PHY) += national.o
obj-$(CONFIG_NXP_C45_TJA11XX_PHY) += nxp-c45-tja11xx.o
obj-$(CONFIG_NXP_TJA11XX_PHY) += nxp-tja11xx.o
diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c
new file mode 100644
index 000000000000..c6923dcf9f8f
--- /dev/null
+++ b/drivers/net/phy/motorcomm.c
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Motorcomm PHYs
+ *
+ * Author: Peter Geis <pgwipeout@...il.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define PHY_ID_YT8511 0x0000010a
+
+#define YT8511_PAGE_SELECT 0x1e
+#define YT8511_PAGE 0x1f
+#define YT8511_EXT_CLK_GATE 0x0c
+#define YT8511_EXT_SLEEP_CTRL 0x27
+
+/* 2b00 25m from pll
+ * 2b01 25m from xtl *default*
+ * 2b10 62.m from pll
+ * 2b11 125m from pll
+ */
+#define YT8511_CLK_125M (BIT(2) | BIT(1))
+
+static int yt8511_read_page(struct phy_device *phydev)
+{
+ return __phy_read(phydev, YT8511_PAGE_SELECT);
+};
+
+static int yt8511_write_page(struct phy_device *phydev, int page)
+{
+ return __phy_write(phydev, YT8511_PAGE_SELECT, page);
+};
+
+static int yt8511_config_init(struct phy_device *phydev)
+{
+ int ret, val, oldpage;
+
+ /* set clock mode to 125mhz */
+ oldpage = phy_select_page(phydev, YT8511_EXT_CLK_GATE);
+ if (oldpage < 0)
+ goto err_restore_page;
+
+ val = __phy_read(phydev, YT8511_PAGE);
+ val |= (YT8511_CLK_125M);
+ ret = __phy_write(phydev, YT8511_PAGE, val);
+
+ /* disable auto sleep */
+ ret = __phy_write(phydev, YT8511_PAGE_SELECT, YT8511_EXT_SLEEP_CTRL);
+ val = __phy_read(phydev, YT8511_PAGE);
+ val &= (~BIT(15));
+ ret = __phy_write(phydev, YT8511_PAGE, val);
+
+err_restore_page:
+ return phy_restore_page(phydev, oldpage, ret);
+}
+
+static struct phy_driver motorcomm_phy_drvs[] = {
+ {
+ PHY_ID_MATCH_EXACT(PHY_ID_YT8511),
+ .name = "YT8511 Gigabit Ethernet",
+ .config_init = &yt8511_config_init,
+ .get_features = genphy_read_abilities,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .read_page = yt8511_read_page,
+ .write_page = yt8511_write_page,
+ },
+};
+
+module_phy_driver(motorcomm_phy_drvs);
+
+MODULE_DESCRIPTION("Motorcomm PHY driver");
+MODULE_AUTHOR("Peter Geis");
+MODULE_LICENSE("GPL");
+
+static const struct mdio_device_id __maybe_unused motorcomm_tbl[] = {
+ { PHY_ID_MATCH_EXACT(PHY_ID_YT8511) },
+ { /* sentinal */ }
+};
+
+MODULE_DEVICE_TABLE(mdio, motorcomm_tbl);
--
2.25.1
Powered by blists - more mailing lists