lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210511142402.4457-3-stephan@gerhold.net>
Date:   Tue, 11 May 2021 16:24:01 +0200
From:   Stephan Gerhold <stephan@...hold.net>
To:     Jonathan Cameron <jic23@...nel.org>
Cc:     Lars-Peter Clausen <lars@...afoo.de>,
        Rob Herring <robh+dt@...nel.org>,
        Robert Yang <decatf@...il.com>, linux-iio@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Michał Mirosław <mirq-linux@...e.qmqm.pl>,
        Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>,
        ~postmarketos/upstreaming@...ts.sr.ht,
        Hans de Goede <hdegoede@...hat.com>,
        Stephan Gerhold <stephan@...hold.net>
Subject: [PATCH v2 2/3] iio: accel: kxcjk-1013: Refactor configuration registers into struct

Most Kionix accelerometers seem to use fairly consistent register bits,
but the register addresses are not necessarily the same. This is already
partially the case for the KXTF9 (added in commit 1540d0106bcb
("iio: accel: kxcjk1013: add support for KXTF9")), which has some
registers at different addresses.

However, it's even much worse for the KX023-1025. All register bits
used by the kxcjk-1013 driver seem to be fully compatible with KX023,
but it has most registers at totally different addresses.

In preparation to add support for KX023-1025, move the fixed register
addresses into a struct so we can change them for KX023 more easily.

Cc: Michał Mirosław <mirq-linux@...e.qmqm.pl>
Cc: Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@...hat.com>
Signed-off-by: Stephan Gerhold <stephan@...hold.net>
---
 drivers/iio/accel/kxcjk-1013.c | 124 ++++++++++++++++++++++-----------
 1 file changed, 82 insertions(+), 42 deletions(-)

diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
index 283e6a3feffc..ab8c972e1a35 100644
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -51,13 +51,15 @@
 #define KXTF9_REG_TILT_POS_CUR		0x10
 #define KXTF9_REG_TILT_POS_PREV		0x11
 #define KXTF9_REG_INT_SRC1		0x15
-#define KXCJK1013_REG_INT_SRC1		0x16	/* compatible, but called INT_SRC2 in KXTF9 ds */
+#define KXTF9_REG_INT_SRC2		0x16
+#define KXCJK1013_REG_INT_SRC1		0x16
 #define KXCJK1013_REG_INT_SRC2		0x17
 #define KXCJK1013_REG_STATUS_REG	0x18
 #define KXCJK1013_REG_INT_REL		0x1A
 #define KXCJK1013_REG_CTRL1		0x1B
 #define KXTF9_REG_CTRL2			0x1C
-#define KXCJK1013_REG_CTRL2		0x1D	/* mostly compatible, CTRL_REG3 in KTXF9 ds */
+#define KXTF9_REG_CTRL3			0x1D
+#define KXCJK1013_REG_CTRL2		0x1D
 #define KXCJK1013_REG_INT_CTRL1		0x1E
 #define KXCJK1013_REG_INT_CTRL2		0x1F
 #define KXTF9_REG_INT_CTRL3		0x20
@@ -133,6 +135,43 @@ enum kx_acpi_type {
 	ACPI_KIOX010A,
 };
 
+struct kx_chipset_regs {
+	u8 int_src1;
+	u8 int_src2;
+	u8 int_rel;
+	u8 ctrl1;
+	u8 wuf_ctrl;
+	u8 int_ctrl1;
+	u8 data_ctrl;
+	u8 wake_timer;
+	u8 wake_thres;
+};
+
+static const struct kx_chipset_regs kxcjk1013_regs = {
+	.int_src1	= KXCJK1013_REG_INT_SRC1,
+	.int_src2	= KXCJK1013_REG_INT_SRC2,
+	.int_rel	= KXCJK1013_REG_INT_REL,
+	.ctrl1		= KXCJK1013_REG_CTRL1,
+	.wuf_ctrl	= KXCJK1013_REG_CTRL2,
+	.int_ctrl1	= KXCJK1013_REG_INT_CTRL1,
+	.data_ctrl	= KXCJK1013_REG_DATA_CTRL,
+	.wake_timer	= KXCJK1013_REG_WAKE_TIMER,
+	.wake_thres	= KXCJK1013_REG_WAKE_THRES,
+};
+
+static const struct kx_chipset_regs kxtf9_regs = {
+	/* .int_src1 was moved to INT_SRC2 on KXTF9 */
+	.int_src1	= KXTF9_REG_INT_SRC2,
+	/* .int_src2 is not available */
+	.int_rel	= KXCJK1013_REG_INT_REL,
+	.ctrl1		= KXCJK1013_REG_CTRL1,
+	.wuf_ctrl	= KXTF9_REG_CTRL3,
+	.int_ctrl1	= KXCJK1013_REG_INT_CTRL1,
+	.data_ctrl	= KXCJK1013_REG_DATA_CTRL,
+	.wake_timer	= KXCJK1013_REG_WAKE_TIMER,
+	.wake_thres	= KXTF9_REG_WAKE_THRESH,
+};
+
 struct kxcjk1013_data {
 	struct regulator_bulk_data regulators[2];
 	struct i2c_client *client;
@@ -152,6 +191,7 @@ struct kxcjk1013_data {
 	int64_t timestamp;
 	enum kx_chipset chipset;
 	enum kx_acpi_type acpi_type;
+	const struct kx_chipset_regs *regs;
 };
 
 enum kxcjk1013_axis {
@@ -309,7 +349,7 @@ static int kxcjk1013_set_mode(struct kxcjk1013_data *data,
 {
 	int ret;
 
-	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
+	ret = i2c_smbus_read_byte_data(data->client, data->regs->ctrl1);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
 		return ret;
@@ -320,8 +360,7 @@ static int kxcjk1013_set_mode(struct kxcjk1013_data *data,
 	else
 		ret |= KXCJK1013_REG_CTRL1_BIT_PC1;
 
-	ret = i2c_smbus_write_byte_data(data->client,
-					KXCJK1013_REG_CTRL1, ret);
+	ret = i2c_smbus_write_byte_data(data->client, data->regs->ctrl1, ret);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
 		return ret;
@@ -335,7 +374,7 @@ static int kxcjk1013_get_mode(struct kxcjk1013_data *data,
 {
 	int ret;
 
-	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
+	ret = i2c_smbus_read_byte_data(data->client, data->regs->ctrl1);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
 		return ret;
@@ -353,7 +392,7 @@ static int kxcjk1013_set_range(struct kxcjk1013_data *data, int range_index)
 {
 	int ret;
 
-	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
+	ret = i2c_smbus_read_byte_data(data->client, data->regs->ctrl1);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
 		return ret;
@@ -364,9 +403,7 @@ static int kxcjk1013_set_range(struct kxcjk1013_data *data, int range_index)
 	ret |= (KXCJK1013_scale_table[range_index].gsel_0 << 3);
 	ret |= (KXCJK1013_scale_table[range_index].gsel_1 << 4);
 
-	ret = i2c_smbus_write_byte_data(data->client,
-					KXCJK1013_REG_CTRL1,
-					ret);
+	ret = i2c_smbus_write_byte_data(data->client, data->regs->ctrl1, ret);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
 		return ret;
@@ -400,7 +437,7 @@ static int kxcjk1013_chip_init(struct kxcjk1013_data *data)
 	if (ret < 0)
 		return ret;
 
-	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
+	ret = i2c_smbus_read_byte_data(data->client, data->regs->ctrl1);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
 		return ret;
@@ -409,8 +446,7 @@ static int kxcjk1013_chip_init(struct kxcjk1013_data *data)
 	/* Set 12 bit mode */
 	ret |= KXCJK1013_REG_CTRL1_BIT_RES;
 
-	ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_CTRL1,
-					ret);
+	ret = i2c_smbus_write_byte_data(data->client, data->regs->ctrl1, ret);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error reading reg_ctrl\n");
 		return ret;
@@ -421,7 +457,7 @@ static int kxcjk1013_chip_init(struct kxcjk1013_data *data)
 	if (ret < 0)
 		return ret;
 
-	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_DATA_CTRL);
+	ret = i2c_smbus_read_byte_data(data->client, data->regs->data_ctrl);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error reading reg_data_ctrl\n");
 		return ret;
@@ -430,7 +466,7 @@ static int kxcjk1013_chip_init(struct kxcjk1013_data *data)
 	data->odr_bits = ret;
 
 	/* Set up INT polarity */
-	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_CTRL1);
+	ret = i2c_smbus_read_byte_data(data->client, data->regs->int_ctrl1);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error reading reg_int_ctrl1\n");
 		return ret;
@@ -441,8 +477,7 @@ static int kxcjk1013_chip_init(struct kxcjk1013_data *data)
 	else
 		ret &= ~KXCJK1013_REG_INT_CTRL1_BIT_IEA;
 
-	ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_INT_CTRL1,
-					ret);
+	ret = i2c_smbus_write_byte_data(data->client, data->regs->int_ctrl1, ret);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n");
 		return ret;
@@ -497,10 +532,9 @@ static int kxcjk1013_set_power_state(struct kxcjk1013_data *data, bool on)
 
 static int kxcjk1013_chip_update_thresholds(struct kxcjk1013_data *data)
 {
-	int waketh_reg, ret;
+	int ret;
 
-	ret = i2c_smbus_write_byte_data(data->client,
-					KXCJK1013_REG_WAKE_TIMER,
+	ret = i2c_smbus_write_byte_data(data->client, data->regs->wake_timer,
 					data->wake_dur);
 	if (ret < 0) {
 		dev_err(&data->client->dev,
@@ -508,9 +542,7 @@ static int kxcjk1013_chip_update_thresholds(struct kxcjk1013_data *data)
 		return ret;
 	}
 
-	waketh_reg = data->chipset == KXTF9 ?
-		KXTF9_REG_WAKE_THRESH : KXCJK1013_REG_WAKE_THRES;
-	ret = i2c_smbus_write_byte_data(data->client, waketh_reg,
+	ret = i2c_smbus_write_byte_data(data->client, data->regs->wake_thres,
 					data->wake_thres);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error writing reg_wake_thres\n");
@@ -539,7 +571,7 @@ static int kxcjk1013_setup_any_motion_interrupt(struct kxcjk1013_data *data,
 	if (ret < 0)
 		return ret;
 
-	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_CTRL1);
+	ret = i2c_smbus_read_byte_data(data->client, data->regs->int_ctrl1);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error reading reg_int_ctrl1\n");
 		return ret;
@@ -550,14 +582,13 @@ static int kxcjk1013_setup_any_motion_interrupt(struct kxcjk1013_data *data,
 	else
 		ret &= ~KXCJK1013_REG_INT_CTRL1_BIT_IEN;
 
-	ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_INT_CTRL1,
-					ret);
+	ret = i2c_smbus_write_byte_data(data->client, data->regs->int_ctrl1, ret);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n");
 		return ret;
 	}
 
-	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
+	ret = i2c_smbus_read_byte_data(data->client, data->regs->ctrl1);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
 		return ret;
@@ -568,8 +599,7 @@ static int kxcjk1013_setup_any_motion_interrupt(struct kxcjk1013_data *data,
 	else
 		ret &= ~KXCJK1013_REG_CTRL1_BIT_WUFE;
 
-	ret = i2c_smbus_write_byte_data(data->client,
-					KXCJK1013_REG_CTRL1, ret);
+	ret = i2c_smbus_write_byte_data(data->client, data->regs->ctrl1, ret);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
 		return ret;
@@ -599,7 +629,7 @@ static int kxcjk1013_setup_new_data_interrupt(struct kxcjk1013_data *data,
 	if (ret < 0)
 		return ret;
 
-	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_CTRL1);
+	ret = i2c_smbus_read_byte_data(data->client, data->regs->int_ctrl1);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error reading reg_int_ctrl1\n");
 		return ret;
@@ -610,14 +640,13 @@ static int kxcjk1013_setup_new_data_interrupt(struct kxcjk1013_data *data,
 	else
 		ret &= ~KXCJK1013_REG_INT_CTRL1_BIT_IEN;
 
-	ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_INT_CTRL1,
-					ret);
+	ret = i2c_smbus_write_byte_data(data->client, data->regs->int_ctrl1, ret);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n");
 		return ret;
 	}
 
-	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
+	ret = i2c_smbus_read_byte_data(data->client, data->regs->ctrl1);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
 		return ret;
@@ -628,8 +657,7 @@ static int kxcjk1013_setup_new_data_interrupt(struct kxcjk1013_data *data,
 	else
 		ret &= ~KXCJK1013_REG_CTRL1_BIT_DRDY;
 
-	ret = i2c_smbus_write_byte_data(data->client,
-					KXCJK1013_REG_CTRL1, ret);
+	ret = i2c_smbus_write_byte_data(data->client, data->regs->ctrl1, ret);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
 		return ret;
@@ -701,7 +729,7 @@ static int kxcjk1013_set_odr(struct kxcjk1013_data *data, int val, int val2)
 	if (ret < 0)
 		return ret;
 
-	ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_DATA_CTRL,
+	ret = i2c_smbus_write_byte_data(data->client, data->regs->data_ctrl,
 					odr_setting->odr_bits);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error writing data_ctrl\n");
@@ -710,7 +738,7 @@ static int kxcjk1013_set_odr(struct kxcjk1013_data *data, int val, int val2)
 
 	data->odr_bits = odr_setting->odr_bits;
 
-	ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_CTRL2,
+	ret = i2c_smbus_write_byte_data(data->client, data->regs->wuf_ctrl,
 					odr_setting->wuf_bits);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error writing reg_ctrl2\n");
@@ -1113,7 +1141,7 @@ static void kxcjk1013_trig_reen(struct iio_trigger *trig)
 	struct kxcjk1013_data *data = iio_priv(indio_dev);
 	int ret;
 
-	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_REL);
+	ret = i2c_smbus_read_byte_data(data->client, data->regs->int_rel);
 	if (ret < 0)
 		dev_err(&data->client->dev, "Error reading reg_int_rel\n");
 }
@@ -1166,8 +1194,7 @@ static void kxcjk1013_report_motion_event(struct iio_dev *indio_dev)
 {
 	struct kxcjk1013_data *data = iio_priv(indio_dev);
 
-	int ret = i2c_smbus_read_byte_data(data->client,
-					   KXCJK1013_REG_INT_SRC2);
+	int ret = i2c_smbus_read_byte_data(data->client, data->regs->int_src2);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error reading reg_int_src2\n");
 		return;
@@ -1234,7 +1261,7 @@ static irqreturn_t kxcjk1013_event_handler(int irq, void *private)
 	struct kxcjk1013_data *data = iio_priv(indio_dev);
 	int ret;
 
-	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_SRC1);
+	ret = i2c_smbus_read_byte_data(data->client, data->regs->int_src1);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error reading reg_int_src1\n");
 		goto ack_intr;
@@ -1257,7 +1284,7 @@ static irqreturn_t kxcjk1013_event_handler(int irq, void *private)
 	if (data->dready_trigger_on)
 		return IRQ_HANDLED;
 
-	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_REL);
+	ret = i2c_smbus_read_byte_data(data->client, data->regs->int_rel);
 	if (ret < 0)
 		dev_err(&data->client->dev, "Error reading reg_int_rel\n");
 
@@ -1378,6 +1405,19 @@ static int kxcjk1013_probe(struct i2c_client *client,
 	} else
 		return -ENODEV;
 
+	switch (data->chipset) {
+	case KXCJK1013:
+	case KXCJ91008:
+	case KXTJ21009:
+		data->regs = &kxcjk1013_regs;
+		break;
+	case KXTF9:
+		data->regs = &kxtf9_regs;
+		break;
+	default:
+		return -EINVAL;
+	}
+
 	ret = kxcjk1013_chip_init(data);
 	if (ret < 0)
 		return ret;
-- 
2.31.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ