linux-kernel - [PATCH 5.11 145/601] serial: stm32: fix probe and remove order for dma

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210512144832.597438589@linuxfoundation.org>
Date:   Wed, 12 May 2021 16:43:42 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Erwan Le Ray <erwan.leray@...s.st.com>,
        Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.11 145/601] serial: stm32: fix probe and remove order for dma

From: Erwan Le Ray <erwan.leray@...s.st.com>

[ Upstream commit 87fd0741d6dcf63ebdb14050c2b921ae14c7f307 ]

The probe and remove orders are wrong as the uart_port is registered
before saving device data in the probe, and unregistered after DMA
resource deallocation in the remove. uart_port registering should be
done at the end of probe and unregistering should be done at the begin of
remove to avoid resource allocation issues.

Fix probe and remove orders. This enforce resource allocation occur at
proper time.
Terminate both DMA rx and tx transfers before removing device.

Move pm_runtime after uart_remove_one_port() call in remove() to keep the
probe error path.

Fixes: 3489187204eb ("serial: stm32: adding dma support")
Signed-off-by: Erwan Le Ray <erwan.leray@...s.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-2-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/tty/serial/stm32-usart.c | 57 ++++++++++++++++++++++++--------
 1 file changed, 44 insertions(+), 13 deletions(-)

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 717a97759928..dd029696893a 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -1245,10 +1245,6 @@ static int stm32_usart_serial_probe(struct platform_device *pdev)
 		device_set_wakeup_enable(&pdev->dev, false);
 	}
 
-	ret = uart_add_one_port(&stm32_usart_driver, &stm32port->port);
-	if (ret)
-		goto err_wirq;
-
 	ret = stm32_usart_of_dma_rx_probe(stm32port, pdev);
 	if (ret)
 		dev_info(&pdev->dev, "interrupt mode used for rx (no dma)\n");
@@ -1262,11 +1258,40 @@ static int stm32_usart_serial_probe(struct platform_device *pdev)
 	pm_runtime_get_noresume(&pdev->dev);
 	pm_runtime_set_active(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
+
+	ret = uart_add_one_port(&stm32_usart_driver, &stm32port->port);
+	if (ret)
+		goto err_port;
+
 	pm_runtime_put_sync(&pdev->dev);
 
 	return 0;
 
-err_wirq:
+err_port:
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+
+	if (stm32port->rx_ch) {
+		dmaengine_terminate_async(stm32port->rx_ch);
+		dma_release_channel(stm32port->rx_ch);
+	}
+
+	if (stm32port->rx_dma_buf)
+		dma_free_coherent(&pdev->dev,
+				  RX_BUF_L, stm32port->rx_buf,
+				  stm32port->rx_dma_buf);
+
+	if (stm32port->tx_ch) {
+		dmaengine_terminate_async(stm32port->tx_ch);
+		dma_release_channel(stm32port->tx_ch);
+	}
+
+	if (stm32port->tx_dma_buf)
+		dma_free_coherent(&pdev->dev,
+				  TX_BUF_L, stm32port->tx_buf,
+				  stm32port->tx_dma_buf);
+
 	if (stm32port->wakeirq > 0)
 		dev_pm_clear_wake_irq(&pdev->dev);
 
@@ -1288,11 +1313,20 @@ static int stm32_usart_serial_remove(struct platform_device *pdev)
 	int err;
 
 	pm_runtime_get_sync(&pdev->dev);
+	err = uart_remove_one_port(&stm32_usart_driver, port);
+	if (err)
+		return(err);
+
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
 
 	stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAR);
 
-	if (stm32_port->rx_ch)
+	if (stm32_port->rx_ch) {
+		dmaengine_terminate_async(stm32_port->rx_ch);
 		dma_release_channel(stm32_port->rx_ch);
+	}
 
 	if (stm32_port->rx_dma_buf)
 		dma_free_coherent(&pdev->dev,
@@ -1301,8 +1335,10 @@ static int stm32_usart_serial_remove(struct platform_device *pdev)
 
 	stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT);
 
-	if (stm32_port->tx_ch)
+	if (stm32_port->tx_ch) {
+		dmaengine_terminate_async(stm32_port->tx_ch);
 		dma_release_channel(stm32_port->tx_ch);
+	}
 
 	if (stm32_port->tx_dma_buf)
 		dma_free_coherent(&pdev->dev,
@@ -1316,12 +1352,7 @@ static int stm32_usart_serial_remove(struct platform_device *pdev)
 
 	clk_disable_unprepare(stm32_port->clk);
 
-	err = uart_remove_one_port(&stm32_usart_driver, port);
-
-	pm_runtime_disable(&pdev->dev);
-	pm_runtime_put_noidle(&pdev->dev);
-
-	return err;
+	return 0;
 }
 
 #ifdef CONFIG_SERIAL_STM32_CONSOLE
-- 
2.30.2