| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210512065201.35268-2-masahiroy@kernel.org>
Date: Wed, 12 May 2021 15:52:01 +0900
From: Masahiro Yamada <masahiroy@...nel.org>
To: linux-kbuild@...r.kernel.org
Cc: Masahiro Yamada <masahiroy@...nel.org>,
Alexei Starovoitov <ast@...nel.org>,
Andrii Nakryiko <andrii@...nel.org>,
Daniel Borkmann <daniel@...earbox.net>,
John Fastabend <john.fastabend@...il.com>,
KP Singh <kpsingh@...nel.org>, Martin KaFai Lau <kafai@...com>,
Michal Marek <michal.lkml@...kovi.net>,
Song Liu <songliubraving@...com>, Yonghong Song <yhs@...com>,
bpf@...r.kernel.org, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org
Subject: [PATCH 2/2] kbuild: remove libelf checks from top Makefile
I do not see a good reason why only the libelf development package must
be so carefully checked.
Kbuild generally does not check host tools or libraries.
For example, x86_64 defconfig fails to build with no libssl development
package installed.
scripts/extract-cert.c:21:10: fatal error: openssl/bio.h: No such file or directory
21 | #include <openssl/bio.h>
| ^~~~~~~~~~~~~~~
To solve the build error, you need to install libssl-dev or openssl-devel
package, depending on your distribution.
'apt-file search', 'dnf provides', etc. is your frined to find a proper
package to install.
This commit removes all the libelf checks from the top Makefile.
If libelf is missing, objtool will fail to build in a similar pattern:
.../linux/tools/objtool/include/objtool/elf.h:10:10: fatal error: gelf.h: No such file or directory
10 | #include <gelf.h>
You need to install libelf-dev, libelf-devel, or elfutils-libelf-devel
to proceed.
Another remarkable change is, CONFIG_STACK_VALIDATION (without
CONFIG_UNWINDER_ORC) previously continued to build with a warning,
but now it will treat missing libelf as an error.
This is just a one-time installation, so it should not matter to break
a build and make a user install the package.
BTW, the traditional way to handle such checks is autotool, but according
to [1], I do not expect the kernel build would have similar scripting
like './configure' does.
[1]: https://lore.kernel.org/lkml/CA+55aFzr2HTZVOuzpHYDwmtRJLsVzE-yqg2DHpHi_9ePsYp5ug@mail.gmail.com/
Signed-off-by: Masahiro Yamada <masahiroy@...nel.org>
---
Makefile | 78 +++++++++++----------------------------
scripts/Makefile.build | 2 -
scripts/Makefile.modfinal | 2 -
3 files changed, 22 insertions(+), 60 deletions(-)
diff --git a/Makefile b/Makefile
index d60dc028f09c..bfbb7c8cbb0f 100644
--- a/Makefile
+++ b/Makefile
@@ -1081,41 +1081,6 @@ export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE)
MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
export MODLIB
-HOST_LIBELF_LIBS = $(shell pkg-config libelf --libs 2>/dev/null || echo -lelf)
-
-has_libelf = $(call try-run,\
- echo "int main() {}" | $(HOSTCC) $(KBUILD_HOSTLDFLAGS) -xc -o /dev/null $(HOST_LIBELF_LIBS) -,1,0)
-
-ifdef CONFIG_STACK_VALIDATION
- ifeq ($(has_libelf),1)
- objtool_target := tools/objtool FORCE
- else
- SKIP_STACK_VALIDATION := 1
- export SKIP_STACK_VALIDATION
- endif
-endif
-
-PHONY += resolve_btfids_clean
-
-resolve_btfids_O = $(abspath $(objtree))/tools/bpf/resolve_btfids
-
-# tools/bpf/resolve_btfids directory might not exist
-# in output directory, skip its clean in that case
-resolve_btfids_clean:
-ifneq ($(wildcard $(resolve_btfids_O)),)
- $(Q)$(MAKE) -sC $(srctree)/tools/bpf/resolve_btfids O=$(resolve_btfids_O) clean
-endif
-
-ifdef CONFIG_BPF
-ifdef CONFIG_DEBUG_INFO_BTF
- ifeq ($(has_libelf),1)
- resolve_btfids_target := tools/bpf/resolve_btfids FORCE
- else
- ERROR_RESOLVE_BTFIDS := 1
- endif
-endif # CONFIG_DEBUG_INFO_BTF
-endif # CONFIG_BPF
-
PHONY += prepare0
export extmod_prefix = $(if $(KBUILD_EXTMOD),$(KBUILD_EXTMOD)/)
@@ -1227,7 +1192,7 @@ prepare0: archprepare
$(Q)$(MAKE) $(build)=.
# All the preparing..
-prepare: prepare0 prepare-objtool prepare-resolve_btfids
+prepare: prepare0
PHONY += remove-stale-files
remove-stale-files:
@@ -1244,26 +1209,6 @@ uapi-asm-generic:
$(Q)$(MAKE) $(asm-generic)=arch/$(SRCARCH)/include/generated/uapi/asm \
generic=include/uapi/asm-generic
-PHONY += prepare-objtool prepare-resolve_btfids
-prepare-objtool: $(objtool_target)
-ifeq ($(SKIP_STACK_VALIDATION),1)
-ifdef CONFIG_FTRACE_MCOUNT_USE_OBJTOOL
- @echo "error: Cannot generate __mcount_loc for CONFIG_DYNAMIC_FTRACE=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2
- @false
-endif
-ifdef CONFIG_UNWINDER_ORC
- @echo "error: Cannot generate ORC metadata for CONFIG_UNWINDER_ORC=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2
- @false
-else
- @echo "warning: Cannot use CONFIG_STACK_VALIDATION=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2
-endif
-endif
-
-prepare-resolve_btfids: $(resolve_btfids_target)
-ifeq ($(ERROR_RESOLVE_BTFIDS),1)
- @echo "error: Cannot resolve BTF IDs for CONFIG_DEBUG_INFO_BTF, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2
- @false
-endif
# Generate some files
# ---------------------------------------------------------------------------
@@ -1354,6 +1299,27 @@ scripts_unifdef: scripts_basic
# ---------------------------------------------------------------------------
# Tools
+ifdef CONFIG_STACK_VALIDATION
+prepare: tools/objtool
+endif
+
+ifdef CONFIG_BPF
+ifdef CONFIG_DEBUG_INFO_BTF
+prepare: tools/bpf/resolve_btfids
+endif
+endif
+
+PHONY += resolve_btfids_clean
+
+resolve_btfids_O = $(abspath $(objtree))/tools/bpf/resolve_btfids
+
+# tools/bpf/resolve_btfids directory might not exist
+# in output directory, skip its clean in that case
+resolve_btfids_clean:
+ifneq ($(wildcard $(resolve_btfids_O)),)
+ $(Q)$(MAKE) -sC $(srctree)/tools/bpf/resolve_btfids O=$(resolve_btfids_O) clean
+endif
+
# Clear a bunch of variables before executing the submake
ifeq ($(quiet),silent_)
tools_silent=s
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 949f723efe53..7adc3a2c3c31 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -219,7 +219,6 @@ endif # CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT
ifdef CONFIG_STACK_VALIDATION
ifndef CONFIG_LTO_CLANG
-ifneq ($(SKIP_STACK_VALIDATION),1)
__objtool_obj := $(objtree)/tools/objtool/objtool
@@ -233,7 +232,6 @@ objtool_obj = $(if $(patsubst y%,, \
$(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n), \
$(__objtool_obj))
-endif # SKIP_STACK_VALIDATION
endif # CONFIG_LTO_CLANG
endif # CONFIG_STACK_VALIDATION
diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
index dd87cea9fba7..bdee3babc5cf 100644
--- a/scripts/Makefile.modfinal
+++ b/scripts/Makefile.modfinal
@@ -39,12 +39,10 @@ prelink-ext := .lto
# so let's now process the prelinked binary before we link the module.
ifdef CONFIG_STACK_VALIDATION
-ifneq ($(SKIP_STACK_VALIDATION),1)
cmd_ld_ko_o += \
$(objtree)/tools/objtool/objtool $(objtool_args) \
$(@:.ko=$(prelink-ext).o);
-endif # SKIP_STACK_VALIDATION
endif # CONFIG_STACK_VALIDATION
endif # CONFIG_LTO_CLANG
--
2.27.0
Powered by blists - more mailing lists