[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210512144847.791271500@linuxfoundation.org>
Date: Wed, 12 May 2021 16:46:04 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Dinghao Liu <dinghao.liu@....edu.cn>,
Mark Brown <broonie@...nel.org>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.12 318/677] spi: spi-zynqmp-gqspi: Fix runtime PM imbalance in zynqmp_qspi_probe
From: Dinghao Liu <dinghao.liu@....edu.cn>
[ Upstream commit a21fbc42807b15b74b0891bd557063e6acf4fcae ]
When platform_get_irq() fails, a pairing PM usage counter
increment is needed to keep the counter balanced. It's the
same for the following error paths.
Signed-off-by: Dinghao Liu <dinghao.liu@....edu.cn>
Link: https://lore.kernel.org/r/20210408092559.3824-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@...nel.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/spi/spi-zynqmp-gqspi.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index 408e348382c5..32e53f379e9b 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -1163,11 +1163,16 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
+
+ ret = pm_runtime_get_sync(&pdev->dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to pm_runtime_get_sync: %d\n", ret);
+ goto clk_dis_all;
+ }
+
/* QSPI controller initializations */
zynqmp_qspi_init_hw(xqspi);
- pm_runtime_mark_last_busy(&pdev->dev);
- pm_runtime_put_autosuspend(&pdev->dev);
xqspi->irq = platform_get_irq(pdev, 0);
if (xqspi->irq <= 0) {
ret = -ENXIO;
@@ -1190,6 +1195,7 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_RX_QUAD |
SPI_TX_DUAL | SPI_TX_QUAD;
ctlr->dev.of_node = np;
+ ctlr->auto_runtime_pm = true;
ret = devm_spi_register_controller(&pdev->dev, ctlr);
if (ret) {
@@ -1197,9 +1203,13 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
goto clk_dis_all;
}
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
+
return 0;
clk_dis_all:
+ pm_runtime_put_sync(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_disable(&pdev->dev);
clk_disable_unprepare(xqspi->refclk);
--
2.30.2
Powered by blists - more mailing lists