[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210512144859.225190440@linuxfoundation.org>
Date: Wed, 12 May 2021 16:51:44 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Tobias Waldekranz <tobias@...dekranz.com>,
Andrew Lunn <andrew@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.12 658/677] net: dsa: mv88e6xxx: Fix 6095/6097/6185 ports in non-SERDES CMODE
From: Tobias Waldekranz <tobias@...dekranz.com>
[ Upstream commit 6066234aa33850e9e35e7be82d92b9e9091e774b ]
The .serdes_get_lane op used the magic value 0xff to indicate a valid
SERDES lane and 0 signaled that a non-SERDES mode was set on the port.
Unfortunately, "0" is also a valid lane ID, so even when these ports
where configured to e.g. RGMII the driver would set them up as SERDES
ports.
- Replace 0xff with 0 to indicate a valid lane ID. The number is on
the one hand just as arbitrary, but it is at least the first valid one
and therefore less of a surprise.
- Follow the other .serdes_get_lane implementations and return -ENODEV
in the case where no SERDES is assigned to the port.
Fixes: f5be107c3338 ("net: dsa: mv88e6xxx: Support serdes ports on MV88E6097/6095/6185")
Signed-off-by: Tobias Waldekranz <tobias@...dekranz.com>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/net/dsa/mv88e6xxx/serdes.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.c b/drivers/net/dsa/mv88e6xxx/serdes.c
index 3195936dc5be..2ce04fef698d 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.c
+++ b/drivers/net/dsa/mv88e6xxx/serdes.c
@@ -443,15 +443,15 @@ int mv88e6185_serdes_power(struct mv88e6xxx_chip *chip, int port, u8 lane,
u8 mv88e6185_serdes_get_lane(struct mv88e6xxx_chip *chip, int port)
{
/* There are no configurable serdes lanes on this switch chip but we
- * need to return non-zero so that callers of
+ * need to return a non-negative lane number so that callers of
* mv88e6xxx_serdes_get_lane() know this is a serdes port.
*/
switch (chip->ports[port].cmode) {
case MV88E6185_PORT_STS_CMODE_SERDES:
case MV88E6185_PORT_STS_CMODE_1000BASE_X:
- return 0xff;
- default:
return 0;
+ default:
+ return -ENODEV;
}
}
--
2.30.2
Powered by blists - more mailing lists