| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <7de0296584334229917504da50a0ac38@realtek.com>
Date: Thu, 13 May 2021 03:13:36 +0000
From: Hayes Wang <hayeswang@...ltek.com>
To: syzbot <syzbot+95afd23673f5dd295c57@...kaller.appspotmail.com>,
"davem@...emloft.net" <davem@...emloft.net>,
"kuba@...nel.org" <kuba@...nel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"syzkaller-bugs@...glegroups.com" <syzkaller-bugs@...glegroups.com>
CC: nic_swsd <nic_swsd@...ltek.com>
Subject: RE: [syzbot] WARNING in rtl8152_probe
syzbot <syzbot+95afd23673f5dd295c57@...kaller.appspotmail.com>
> Sent: Wednesday, May 12, 2021 5:40 PM
[...]
> usb 1-1: New USB device found, idVendor=045e, idProduct=0927, bcdDevice=89.4f
> usb 1-1: New USB device strings: Mfr=0, Product=4, SerialNumber=0
> usb 1-1: Product: syz
> usb 1-1: config 0 descriptor??
The bcdDevice is strange. Could you dump your USB descriptor?
My log is as following.
[root@...2 r8152_inbox]# dmesg
[ 2174.703974] usb 2-8: new SuperSpeed Gen 1 USB device number 7 using xhci_hcd
[ 2174.716592] usb 2-8: New USB device found, idVendor=045e, idProduct=0927, bcdDevice=31.00
[ 2174.716604] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 2174.716609] usb 2-8: Product: USB 10/100/1000 LAN
[ 2174.716613] usb 2-8: Manufacturer: Realtek
[ 2174.716617] usb 2-8: SerialNumber: 0010010AA
[ 2174.837277] usb 2-8: reset SuperSpeed Gen 1 USB device number 7 using xhci_hcd
[ 2174.869013] r8152 2-8:1.0: load rtl8153b-2 v1 10/23/19 successfully
[ 2174.897836] r8152 2-8:1.0 eth2: v1.12.11
[root@...2 r8152_inbox]# ethtool -i eth2
driver: r8152
version: v1.12.11
firmware-version: rtl8153b-2 v1 10/23/19
expansion-rom-version:
bus-info: usb-0000:00:14.0-8
supports-statistics: yes
supports-test: no
supports-eeprom-access: no
supports-register-dump: no
supports-priv-flags: no
[root@...2 r8152_inbox]# lsusb -vd 045e:0927
Bus 002 Device 007: ID 045e:0927 Microsoft Corp. RTL8153B GigE [Surface Ethernet Adapter]
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x045e Microsoft Corp.
idProduct 0x0927 RTL8153B GigE [Surface Ethernet Adapter]
bcdDevice 31.00
iManufacturer 1 Realtek
iProduct 2 USB 10/100/1000 LAN
iSerial 6 0010010AA
bNumConfigurations 2
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0039
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 288mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 8
bMaxBurst 0
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0062
bNumInterfaces 2
bConfigurationValue 2
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 288mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 6 Ethernet Networking
bInterfaceProtocol 0
iInterface 5 CDC Communications Control
CDC Header:
bcdCDC 1.10
CDC Union:
bMasterInterface 0
bSlaveInterface 1
CDC Ethernet:
iMacAddress 3 00E04C660016
bmEthernetStatistics 0x00000000
wMaxSegmentSize 1514
wNumberMCFilters 0x0000
bNumberPowerFilters 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 8
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 4 Ethernet Data
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 3
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 0x0016
bNumDeviceCaps 2
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
HIRD Link Power Management (LPM) Supported
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x02
Latency Tolerance Messages (LTM) Supported
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 2
Lowest fully-functional device speed is High Speed (480Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 2047 micro seconds
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0010
(Bus Powered)
Latency Tolerance Messaging (LTM) Enabled
[root@...2 r8152_inbox]#
Best Regards,
Hayes
Powered by blists - more mailing lists