[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210514075731.ipxq2o4cdxd3piu3@pengutronix.de>
Date: Fri, 14 May 2021 09:57:31 +0200
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Jonathan Cameron <jic23@...nel.org>
Cc: Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Pengutronix Kernel Team <kernel@...gutronix.de>,
David Jander <david@...tonic.nl>,
Robin van der Gracht <robin@...tonic.nl>,
linux-iio@...r.kernel.org, Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald-Stadler <pmeerw@...erw.net>,
Dmitry Torokhov <dmitry.torokhov@...il.com>
Subject: Re: [PATCH v6 0/3] mainline ti tsc2046 adc driver
Hi Jonathan,
On Mon, May 03, 2021 at 12:28:18PM +0100, Jonathan Cameron wrote:
> On Wed, 28 Apr 2021 09:32:05 +0200
> Oleksij Rempel <o.rempel@...gutronix.de> wrote:
>
> Hi Oleksij,
>
> Series applied with the tweaks as per review to patch 3. Please
> check I didn't mess those up though.
>
> Applied to the togreg branch of iio.git and pushed out as testing for
> the autobuilders to poke at it.
It works. Thx!
Now i need to make configurable iio buffer layout
for the drivers/input/touchscreen/resistive-adc-touch.c
Do you have ideas what is the proper way to make it?
Regards,
Oleksij
>
> Jonathan
>
> > changes v6:
> > - get blessing from Dmitry Torokhov
> > - rebase against latest iio/testing
> > - use simple name for iio_dev->name
> > - use Jonathan's version for oversampling-ratio description
> >
> > changes v5:
> > - remove type for the settling-time-us property
> >
> > changes v4:
> > - spell fixes
> > - add more comments
> > - make code more readable
> > - move scan_buf to the priv
> > - use FIELD_GET to extract ADC data
> > - make some multi line code as one line
> > - do not use atomic API for trig_more_count
> > - fix build warning on 64bit system
> > - add NULL check for the devm_kasprintf()
> > - use return devm_iio_device_register(), without additional error
> > printing.
> >
> > changes v3:
> > - different spell fixes
> > - add some notes about driver structure
> > - rename the trigger to point on the touchscreen nature of it
> > - rename DT binding to oversampling-ratio
> > - make sure we have some defaults in case no DT property is set
> >
> > changes v2:
> > - rework and extend DT binding properties
> > - remove touchscreen related code from the IIO ADC driver
> > - make trigger be active longer then IRQ is requesting. This is needed
> > to get "inactive" samples
> > - make oversampling and settle time configurable
> >
> > TI TSC2046 is a touchscreen controller based on 8 channel ADC. Since most of
> > this ADC based touchscreen controller share same set of challenges, it
> > is better keep then as simple IIO ADC devices attached to a generic
> > resistive-adc-touch driver.
> >
> > This driver can replace drivers/input/touchscreen/ads7846.c and has
> > following advantages over it:
> > - less code to maintain
> > - shared code paths (resistive-adc-touch, iio-hwmon, etc)
> > - can be used as plain IIO ADC to investigate signaling issues or test
> > real capacity of the plates and attached low-pass filters
> > (or use the touchscreen as a microphone if you like ;) )
> >
> > Oleksij Rempel (3):
> > dt-bindings:iio:adc: add generic settling-time-us and
> > oversampling-ratio channel properties
> > dt-bindings:iio:adc: add documentation for TI TSC2046 controller
> > iio: adc: add ADC driver for the TI TSC2046 controller
> >
> > .../devicetree/bindings/iio/adc/adc.yaml | 12 +
> > .../bindings/iio/adc/ti,tsc2046.yaml | 115 +++
> > MAINTAINERS | 8 +
> > drivers/iio/adc/Kconfig | 12 +
> > drivers/iio/adc/Makefile | 1 +
> > drivers/iio/adc/ti-tsc2046.c | 720 ++++++++++++++++++
> > 6 files changed, 868 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
> > create mode 100644 drivers/iio/adc/ti-tsc2046.c
> >
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Powered by blists - more mailing lists