| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210514103405.29927-2-srinivas.kandagatla@linaro.org>
Date: Fri, 14 May 2021 11:33:57 +0100
From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To: broonie@...nel.org
Cc: robh@...nel.org, devicetree@...r.kernel.org, perex@...ex.cz,
alsa-devel@...a-project.org, linux-kernel@...r.kernel.org,
lgirdwood@...il.com,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Subject: [PATCH v5 1/9] ASoC: dt-bindings: wcd938x: add bindings for wcd938x
Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC
connected over SoundWire. This device has two SoundWire device RX and
TX respectively, supporting 4 x ADCs, ClassH, Ear, Aux PA, 2xHPH,
7 x TX diff inputs, 8 DMICs, MBHC.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
---
.../bindings/sound/qcom,wcd938x.yaml | 149 ++++++++++++++++++
1 file changed, 149 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
new file mode 100644
index 000000000000..d62d99981ea8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd938x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for Qualcomm WCD9380/WCD9385 Audio Codec
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
+
+description: |
+ Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC.
+ It has RX and TX Soundwire slave devices.
+
+properties:
+ compatible:
+ enum:
+ - qcom,wcd9380-codec
+ - qcom,wcd9385-codec
+
+ reset-gpios:
+ description: GPIO spec for reset line to use
+ maxItems: 1
+
+ vdd-buck-supply:
+ description: A reference to the 1.8V buck supply
+
+ vdd-rxtx-supply:
+ description: A reference to the 1.8V rx supply
+
+ vdd-io-supply:
+ description: A reference to the 1.8V I/O supply
+
+ qcom,tx-device:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+ description: A reference to Soundwire tx device phandle
+
+ qcom,rx-device:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+ description: A reference to Soundwire rx device phandle
+
+ qcom,micbias1-microvolt:
+ description: micbias1 voltage
+ minimum: 1800000
+ maximum: 2850000
+
+ qcom,micbias2-microvolt:
+ description: micbias2 voltage
+ minimum: 1800000
+ maximum: 2850000
+
+ qcom,micbias3-microvolt:
+ description: micbias3 voltage
+ minimum: 1800000
+ maximum: 2850000
+
+ qcom,micbias4-microvolt:
+ description: micbias4 voltage
+ minimum: 1800000
+ maximum: 2850000
+
+ qcom,hphl-jack-type-normally-closed:
+ description: Indicates that HPHL jack switch type is normally closed
+ type: boolean
+
+ qcom,ground-jack-type-normally-closed:
+ description: Indicates that Headset Ground switch type is normally closed
+ type: boolean
+
+ qcom,mbhc-headset-vthreshold-microvolt:
+ description: Voltage threshold value for headset detection
+ minimum: 0
+ maximum: 2850000
+
+ qcom,mbhc-headphone-vthreshold-microvolt:
+ description: Voltage threshold value for headphone detection
+ minimum: 0
+ maximum: 2850000
+
+ qcom,mbhc-buttons-vthreshold-microvolt:
+ description:
+ Array of 8 Voltage threshold values corresponding to headset
+ button0 - button7
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 8
+ maxItems: 8
+
+ '#sound-dai-cells':
+ const: 1
+
+required:
+ - compatible
+ - reset-gpios
+ - qcom,tx-device
+ - qcom,rx-device
+ - qcom,micbias1-microvolt
+ - qcom,micbias2-microvolt
+ - qcom,micbias3-microvolt
+ - qcom,micbias4-microvolt
+ - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ codec {
+ compatible = "qcom,wcd9380-codec";
+ reset-gpios = <&tlmm 32 0>;
+ #sound-dai-cells = <1>;
+ qcom,tx-device = <&wcd938x_tx>;
+ qcom,rx-device = <&wcd938x_rx>;
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+ qcom,hphl-jack-type-normally-closed;
+ qcom,ground-jack-type-normally-closed;
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+ };
+
+ /* ... */
+
+ soundwire@...0000 {
+ #address-cells = <2>;
+ #size-cells = <0>;
+ reg = <0x03210000 0x2000>;
+ wcd938x_rx: codec@0,4 {
+ compatible = "sdw20217010d00";
+ reg = <0 4>;
+ qcom,rx-port-mapping = <1 2 3 4 5>;
+ };
+ };
+
+ soundwire@...0000 {
+ #address-cells = <2>;
+ #size-cells = <0>;
+ reg = <0x03230000 0x2000>;
+ wcd938x_tx: codec@0,3 {
+ compatible = "sdw20217010d00";
+ reg = <0 3>;
+ qcom,tx-port-mapping = <2 3 4 5>;
+ };
+ };
+
+...
--
2.21.0
Powered by blists - more mailing lists