| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210514210015.18142-8-ansuelsmth@gmail.com>
Date: Fri, 14 May 2021 22:59:57 +0200
From: Ansuel Smith <ansuelsmth@...il.com>
To: Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Ansuel Smith <ansuelsmth@...il.com>
Subject: [PATCH net-next v6 07/25] net: dsa: qca8k: handle error with qca8k_rmw operation
qca8k_rmw can fail. Rework any user to handle error values and
correctly return. Change qca8k_rmw to return the error code or 0 instead
of the reg value. The reg returned by qca8k_rmw wasn't used anywhere,
so this doesn't cause any functional change.
Signed-off-by: Ansuel Smith <ansuelsmth@...il.com>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
---
drivers/net/dsa/qca8k.c | 133 +++++++++++++++++++++++++---------------
1 file changed, 83 insertions(+), 50 deletions(-)
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 2fdd7c2e74d5..409f6592048a 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -190,12 +190,13 @@ qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val)
return ret;
}
-static u32
-qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 val)
+static int
+qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val)
{
struct mii_bus *bus = priv->bus;
u16 r1, r2, page;
- u32 ret;
+ u32 val;
+ int ret;
qca8k_split_addr(reg, &r1, &r2, &page);
@@ -205,10 +206,15 @@ qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 val)
if (ret < 0)
goto exit;
- ret = qca8k_mii_read32(bus, 0x10 | r2, r1);
- ret &= ~mask;
- ret |= val;
- qca8k_mii_write32(bus, 0x10 | r2, r1, ret);
+ val = qca8k_mii_read32(bus, 0x10 | r2, r1);
+ if (val < 0) {
+ ret = val;
+ goto exit;
+ }
+
+ val &= ~mask;
+ val |= write_val;
+ qca8k_mii_write32(bus, 0x10 | r2, r1, val);
exit:
mutex_unlock(&bus->mdio_lock);
@@ -216,16 +222,16 @@ qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 val)
return ret;
}
-static void
+static int
qca8k_reg_set(struct qca8k_priv *priv, u32 reg, u32 val)
{
- qca8k_rmw(priv, reg, 0, val);
+ return qca8k_rmw(priv, reg, 0, val);
}
-static void
+static int
qca8k_reg_clear(struct qca8k_priv *priv, u32 reg, u32 val)
{
- qca8k_rmw(priv, reg, val, 0);
+ return qca8k_rmw(priv, reg, val, 0);
}
static int
@@ -570,12 +576,19 @@ qca8k_mib_init(struct qca8k_priv *priv)
int ret;
mutex_lock(&priv->reg_mutex);
- qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY);
+ ret = qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY);
+ if (ret)
+ goto exit;
+
qca8k_busy_wait(priv, QCA8K_REG_MIB, QCA8K_MIB_BUSY);
- qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP);
+
+ ret = qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP);
+ if (ret)
+ goto exit;
ret = qca8k_write(priv, QCA8K_REG_MODULE_EN, QCA8K_MODULE_EN_MIB);
+exit:
mutex_unlock(&priv->reg_mutex);
return ret;
}
@@ -747,9 +760,8 @@ qca8k_setup_mdio_bus(struct qca8k_priv *priv)
* a dt-overlay and driver reload changed the configuration
*/
- qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
- QCA8K_MDIO_MASTER_EN);
- return 0;
+ return qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
+ QCA8K_MDIO_MASTER_EN);
}
priv->ops.phy_read = qca8k_phy_read;
@@ -782,8 +794,12 @@ qca8k_setup(struct dsa_switch *ds)
return ret;
/* Enable CPU Port */
- qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0,
- QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
+ ret = qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0,
+ QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
+ if (ret) {
+ dev_err(priv->dev, "failed enabling CPU port");
+ return ret;
+ }
/* Enable MIB counters */
ret = qca8k_mib_init(priv);
@@ -800,9 +816,12 @@ qca8k_setup(struct dsa_switch *ds)
}
/* Disable forwarding by default on all ports */
- for (i = 0; i < QCA8K_NUM_PORTS; i++)
- qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
- QCA8K_PORT_LOOKUP_MEMBER, 0);
+ for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+ QCA8K_PORT_LOOKUP_MEMBER, 0);
+ if (ret)
+ return ret;
+ }
/* Disable MAC by default on all ports */
for (i = 1; i < QCA8K_NUM_PORTS; i++)
@@ -821,28 +840,37 @@ qca8k_setup(struct dsa_switch *ds)
for (i = 0; i < QCA8K_NUM_PORTS; i++) {
/* CPU port gets connected to all user ports of the switch */
if (dsa_is_cpu_port(ds, i)) {
- qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(QCA8K_CPU_PORT),
- QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(QCA8K_CPU_PORT),
+ QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
+ if (ret)
+ return ret;
}
/* Individual user ports get connected to CPU port only */
if (dsa_is_user_port(ds, i)) {
int shift = 16 * (i % 2);
- qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
- QCA8K_PORT_LOOKUP_MEMBER,
- BIT(QCA8K_CPU_PORT));
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+ QCA8K_PORT_LOOKUP_MEMBER,
+ BIT(QCA8K_CPU_PORT));
+ if (ret)
+ return ret;
/* Enable ARP Auto-learning by default */
- qca8k_reg_set(priv, QCA8K_PORT_LOOKUP_CTRL(i),
- QCA8K_PORT_LOOKUP_LEARN);
+ ret = qca8k_reg_set(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+ QCA8K_PORT_LOOKUP_LEARN);
+ if (ret)
+ return ret;
/* For port based vlans to work we need to set the
* default egress vid
*/
- qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i),
- 0xfff << shift,
- QCA8K_PORT_VID_DEF << shift);
+ ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i),
+ 0xfff << shift,
+ QCA8K_PORT_VID_DEF << shift);
+ if (ret)
+ return ret;
+
ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i),
QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) |
QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF));
@@ -1234,7 +1262,7 @@ qca8k_port_bridge_join(struct dsa_switch *ds, int port, struct net_device *br)
{
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
int port_mask = BIT(QCA8K_CPU_PORT);
- int i;
+ int i, ret;
for (i = 1; i < QCA8K_NUM_PORTS; i++) {
if (dsa_to_port(ds, i)->bridge_dev != br)
@@ -1242,17 +1270,20 @@ qca8k_port_bridge_join(struct dsa_switch *ds, int port, struct net_device *br)
/* Add this port to the portvlan mask of the other ports
* in the bridge
*/
- qca8k_reg_set(priv,
- QCA8K_PORT_LOOKUP_CTRL(i),
- BIT(port));
+ ret = qca8k_reg_set(priv,
+ QCA8K_PORT_LOOKUP_CTRL(i),
+ BIT(port));
+ if (ret)
+ return ret;
if (i != port)
port_mask |= BIT(i);
}
+
/* Add all other ports to this ports portvlan mask */
- qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
- QCA8K_PORT_LOOKUP_MEMBER, port_mask);
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_MEMBER, port_mask);
- return 0;
+ return ret;
}
static void
@@ -1389,18 +1420,19 @@ qca8k_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
struct netlink_ext_ack *extack)
{
struct qca8k_priv *priv = ds->priv;
+ int ret;
if (vlan_filtering) {
- qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
- QCA8K_PORT_LOOKUP_VLAN_MODE,
- QCA8K_PORT_LOOKUP_VLAN_MODE_SECURE);
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_VLAN_MODE,
+ QCA8K_PORT_LOOKUP_VLAN_MODE_SECURE);
} else {
- qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
- QCA8K_PORT_LOOKUP_VLAN_MODE,
- QCA8K_PORT_LOOKUP_VLAN_MODE_NONE);
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_VLAN_MODE,
+ QCA8K_PORT_LOOKUP_VLAN_MODE_NONE);
}
- return 0;
+ return ret;
}
static int
@@ -1422,16 +1454,17 @@ qca8k_port_vlan_add(struct dsa_switch *ds, int port,
if (pvid) {
int shift = 16 * (port % 2);
- qca8k_rmw(priv, QCA8K_EGRESS_VLAN(port),
- 0xfff << shift, vlan->vid << shift);
+ ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(port),
+ 0xfff << shift, vlan->vid << shift);
+ if (ret)
+ return ret;
+
ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(port),
QCA8K_PORT_VLAN_CVID(vlan->vid) |
QCA8K_PORT_VLAN_SVID(vlan->vid));
- if (ret)
- return ret;
}
- return 0;
+ return ret;
}
static int
--
2.30.2
Powered by blists - more mailing lists