| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210516042502.GN2484@yoga>
Date: Sat, 15 May 2021 23:25:02 -0500
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Cc: Rob Clark <robdclark@...il.com>, Sean Paul <sean@...rly.run>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
"open list:DRM DRIVER FOR MSM ADRENO GPU"
<linux-arm-msm@...r.kernel.org>,
"open list:DRM DRIVER FOR MSM ADRENO GPU"
<dri-devel@...ts.freedesktop.org>,
freedreno <freedreno@...ts.freedesktop.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 3/4] drm/msm/dpu: Add SC8180x to hw catalog
On Wed 12 May 17:58 CDT 2021, Dmitry Baryshkov wrote:
> On Tue, 11 May 2021 at 07:19, Bjorn Andersson
> <bjorn.andersson@...aro.org> wrote:
> >
> > From: Rob Clark <robdclark@...omium.org>
> >
> > Add SC8180x to the hardware catalog, for initial support for the
> > platform. Due to limitations in the DP driver only one of the four DP
> > interfaces is left enabled.
> >
> > The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and
> > the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this
> > is flagged appropriately to ensure widebus is disabled - for now.
> >
> > Signed-off-by: Rob Clark <robdclark@...omium.org>
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> > ---
> > .../devicetree/bindings/display/msm/dpu.txt | 4 +-
> > .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 121 ++++++++++++++++++
> > .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 3 +
> > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
> > drivers/gpu/drm/msm/msm_drv.c | 1 +
> > 5 files changed, 128 insertions(+), 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
> > index 586e6eac5b08..b98258374a60 100644
> > --- a/Documentation/devicetree/bindings/display/msm/dpu.txt
> > +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
> > @@ -8,7 +8,7 @@ The DPU display controller is found in SDM845 SoC.
> >
> > MDSS:
> > Required properties:
> > -- compatible: "qcom,sdm845-mdss", "qcom,sc7180-mdss"
> > +- compatible: "qcom,sdm845-mdss", "qcom,sc7180-mdss", "qcom,sc8180x-mdss"
> > - reg: physical base address and length of controller's registers.
> > - reg-names: register region names. The following region is required:
> > * "mdss"
> > @@ -41,7 +41,7 @@ Optional properties:
> >
> > MDP:
> > Required properties:
> > -- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu"
> > +- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu", "qcom,sc8180x-dpu"
> > - reg: physical base address and length of controller's registers.
> > - reg-names : register region names. The following region is required:
> > * "mdp"
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > index b569030a0847..81c429ce94a9 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > @@ -56,6 +56,10 @@
> >
> > #define INTF_SC7280_MASK INTF_SC7180_MASK | BIT(DPU_DATA_HCTL_EN)
> >
> > +#define INTF_SC8180X_MASK BIT(DPU_INTF_INPUT_CTRL) | \
> > + BIT(DPU_INTF_TE) | \
> > + BIT(DPU_INTF_WIDEBUS)
> > +
> > #define INTR_SC7180_MASK \
> > (BIT(DPU_IRQ_TYPE_PING_PONG_RD_PTR) |\
> > BIT(DPU_IRQ_TYPE_PING_PONG_WR_PTR) |\
> > @@ -197,6 +201,22 @@ static const struct dpu_caps sm8150_dpu_caps = {
> > .max_vdeci_exp = MAX_VERT_DECIMATION,
> > };
> >
> > +static const struct dpu_caps sc8180_dpu_caps = {
> > + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
> > + .max_mixer_blendstages = 0xb,
> > + .qseed_type = DPU_SSPP_SCALER_QSEED3,
>
> Is it qseed3 or qseed3lite?
>
> > + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
> > + .ubwc_version = DPU_HW_UBWC_VER_30,
> > + .has_src_split = true,
> > + .has_dim_layer = true,
> > + .has_idle_pc = true,
> > + .has_3d_merge = false, /* I think? */
>
> Hmm. Are you sure? Judging from two DSI interfaces you might have merge3d.
>
> > + .max_linewidth = 4096,
> > + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> > + .max_hdeci_exp = MAX_HORZ_DECIMATION,
> > + .max_vdeci_exp = MAX_VERT_DECIMATION,
> > +};
> > +
> > static const struct dpu_caps sm8250_dpu_caps = {
> > .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
> > .max_mixer_blendstages = 0xb,
> > @@ -265,6 +285,35 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = {
> > },
> > };
> >
> > +static const struct dpu_mdp_cfg sc8180_mdp[] = {
> > + {
> > + .name = "top_0", .id = MDP_TOP,
> > + // TODO check len
> > + .base = 0x0, .len = 0x45C,
> > + .features = 0,
> > + .highest_bank_bit = 0x3,
> > + .clk_ctrls[DPU_CLK_CTRL_VIG0] = {
> > + .reg_off = 0x2AC, .bit_off = 0},
> > + .clk_ctrls[DPU_CLK_CTRL_VIG1] = {
> > + .reg_off = 0x2B4, .bit_off = 0},
> > + .clk_ctrls[DPU_CLK_CTRL_VIG2] = {
> > + .reg_off = 0x2BC, .bit_off = 0},
> > + .clk_ctrls[DPU_CLK_CTRL_VIG3] = {
> > + .reg_off = 0x2C4, .bit_off = 0},
> > + .clk_ctrls[DPU_CLK_CTRL_DMA0] = {
> > + .reg_off = 0x2AC, .bit_off = 8},
> > + .clk_ctrls[DPU_CLK_CTRL_DMA1] = {
> > + .reg_off = 0x2B4, .bit_off = 8},
> > + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
> > + .reg_off = 0x2BC, .bit_off = 8},
> > + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
> > + .reg_off = 0x2C4, .bit_off = 8},
> > +// TODO ???
> > +// .clk_ctrls[DPU_CLK_CTRL_REG_DMA] = {
> > +// .reg_off = 0x2BC, .bit_off = 20},
> > + },
> > +};
> > +
> > static const struct dpu_mdp_cfg sm8250_mdp[] = {
> > {
> > .name = "top_0", .id = MDP_TOP,
> > @@ -789,6 +838,15 @@ static const struct dpu_intf_cfg sc7280_intf[] = {
> > INTF_BLK("intf_5", INTF_5, 0x39000, INTF_EDP, 0, 24, INTF_SC7280_MASK),
> > };
> >
> > +static const struct dpu_intf_cfg sc8180x_intf[] = {
> > +// INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, 24, INTF_SC8180X_MASK),
> > + INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC8180X_MASK),
> > + INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC8180X_MASK),
> > +// INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 1, 24, INTF_SC8180X_MASK),
> > +// INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, 2, 24, INTF_SC8180X_MASK),
> > + INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, 0, 24, INTF_SC8180X_MASK),
>
> Hmm. I think this should be INTF_EDP (or the _ctrl_id should be 1).
>
Right, INTF_5 is wired to the EDP controller. But that prevents it from
being paired with the dp controller. I will have to dig into the
matching further to figure out how to fix this.
Thanks for your feedback.
Regards,
Bjorn
> > +};
> > +
> > /*************************************************************
> > * VBIF sub blocks config
> > *************************************************************/
> > @@ -859,6 +917,10 @@ static const struct dpu_qos_lut_entry sm8150_qos_linear[] = {
> > {.fl = 0, .lut = 0x0011222222223357 },
> > };
> >
> > +static const struct dpu_qos_lut_entry sc8180_qos_linear[] = {
> > + {.fl = 4, .lut = 0x0000000000000357 },
> > +};
> > +
> > static const struct dpu_qos_lut_entry sdm845_qos_macrotile[] = {
> > {.fl = 10, .lut = 0x344556677},
> > {.fl = 11, .lut = 0x3344556677},
> > @@ -872,6 +934,10 @@ static const struct dpu_qos_lut_entry sc7180_qos_macrotile[] = {
> > {.fl = 0, .lut = 0x0011223344556677},
> > };
> >
> > +static const struct dpu_qos_lut_entry sc8180_qos_macrotile[] = {
> > + {.fl = 10, .lut = 0x0000000344556677},
> > +};
> > +
> > static const struct dpu_qos_lut_entry sdm845_qos_nrt[] = {
> > {.fl = 0, .lut = 0x0},
> > };
> > @@ -976,6 +1042,31 @@ static const struct dpu_perf_cfg sm8150_perf_data = {
> > .bw_inefficiency_factor = 120,
> > };
> >
> > +static const struct dpu_perf_cfg sc8180_perf_data = {
> > + .max_bw_low = 9600000,
> > + .max_bw_high = 9600000,
> > + .min_core_ib = 2400000,
> > + .min_llcc_ib = 800000,
> > + .min_dram_ib = 800000,
> > + .danger_lut_tbl = {0xf, 0xffff, 0x0, 0x0},
> > + .qos_lut_tbl = {
> > + {.nentry = ARRAY_SIZE(sc8180_qos_linear),
> > + .entries = sc8180_qos_linear
> > + },
> > + {.nentry = ARRAY_SIZE(sc8180_qos_macrotile),
> > + .entries = sc8180_qos_macrotile
> > + },
> > + {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
> > + .entries = sc7180_qos_nrt
> > + },
> > + /* TODO: macrotile-qseed is different from macrotile */
> > + },
> > + .cdp_cfg = {
> > + {.rd_enable = 1, .wr_enable = 1},
> > + {.rd_enable = 1, .wr_enable = 0}
> > + },
>
> Could you please add .clk_inefficiency_factor / .bw_inefficiency_factor
>
> > +};
> > +
> > static const struct dpu_perf_cfg sm8250_perf_data = {
> > .max_bw_low = 13700000,
> > .max_bw_high = 16600000,
> > @@ -1129,6 +1220,35 @@ static void sm8150_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
> > };
> > }
> >
> > +/*
> > + * sc8180_cfg_init(): populate sc8180 dpu sub-blocks reg offsets
> > + * and instance counts.
> > + */
> > +static void sc8180_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
> > +{
> > + *dpu_cfg = (struct dpu_mdss_cfg){
> > + .caps = &sc8180_dpu_caps,
> > + .mdp_count = ARRAY_SIZE(sc8180_mdp),
> > + .mdp = sc8180_mdp,
> > + .ctl_count = ARRAY_SIZE(sm8150_ctl),
> > + .ctl = sm8150_ctl,
> > + .sspp_count = ARRAY_SIZE(sdm845_sspp),
> > + .sspp = sdm845_sspp,
> > + .mixer_count = ARRAY_SIZE(sm8150_lm),
> > + .mixer = sm8150_lm,
> > + .pingpong_count = ARRAY_SIZE(sm8150_pp),
> > + .pingpong = sm8150_pp,
> > + .intf_count = ARRAY_SIZE(sc8180x_intf),
> > + .intf = sc8180x_intf,
> > + .vbif_count = ARRAY_SIZE(sdm845_vbif),
> > + .vbif = sdm845_vbif,
> > + .reg_dma_count = 1,
> > + .dma_cfg = sm8150_regdma,
> > + .perf = sc8180_perf_data,
> > + .mdss_irqs = 0x3ff,
> > + };
> > +}
> > +
> > /*
> > * sm8250_cfg_init(): populate sm8250 dpu sub-blocks reg offsets
> > * and instance counts.
> > @@ -1191,6 +1311,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
> > { .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init},
> > { .hw_rev = DPU_HW_VER_500, .cfg_init = sm8150_cfg_init},
> > { .hw_rev = DPU_HW_VER_501, .cfg_init = sm8150_cfg_init},
> > + { .hw_rev = DPU_HW_VER_510, .cfg_init = sc8180_cfg_init},
> > { .hw_rev = DPU_HW_VER_600, .cfg_init = sm8250_cfg_init},
> > { .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init},
> > { .hw_rev = DPU_HW_VER_720, .cfg_init = sc7280_cfg_init},
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> > index c2f34a4f82d9..644e315df0fb 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> > @@ -39,6 +39,7 @@
> > #define DPU_HW_VER_410 DPU_HW_VER(4, 1, 0) /* sdm670 v1.0 */
> > #define DPU_HW_VER_500 DPU_HW_VER(5, 0, 0) /* sm8150 v1.0 */
> > #define DPU_HW_VER_501 DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */
> > +#define DPU_HW_VER_510 DPU_HW_VER(5, 1, 1) /* sc8180 */
> > #define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */
> > #define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */
> > #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */
> > @@ -287,6 +288,8 @@ enum dpu_qos_lut_usage {
> > DPU_QOS_LUT_USAGE_LINEAR,
> > DPU_QOS_LUT_USAGE_MACROTILE,
> > DPU_QOS_LUT_USAGE_NRT,
> > + DPU_QOS_LUT_USAGE_CWB,
> > + DPU_QOS_LUT_USAGE_MACROTILE_QSEED,
> > DPU_QOS_LUT_USAGE_MAX,
> > };
> >
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > index 8b01cb660381..7e8f0df2bd88 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > @@ -1228,6 +1228,7 @@ static const struct of_device_id dpu_dt_match[] = {
> > { .compatible = "qcom,sdm845-dpu", },
> > { .compatible = "qcom,sc7180-dpu", },
> > { .compatible = "qcom,sc7280-dpu", },
> > + { .compatible = "qcom,sc8180x-dpu", },
> > { .compatible = "qcom,sm8150-dpu", },
> > { .compatible = "qcom,sm8250-dpu", },
> > {}
> > diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
> > index e1104d2454e2..b5bcbf5c2306 100644
> > --- a/drivers/gpu/drm/msm/msm_drv.c
> > +++ b/drivers/gpu/drm/msm/msm_drv.c
> > @@ -1342,6 +1342,7 @@ static const struct of_device_id dt_match[] = {
> > { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU },
> > { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU },
> > { .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU },
> > + { .compatible = "qcom,sc8180x-mdss", .data = (void *)KMS_DPU },
> > { .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU },
> > { .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU },
> > {}
> > --
> > 2.29.2
> >
>
>
> --
> With best wishes
> Dmitry
Powered by blists - more mailing lists