linux-kernel - [PATCH v2 4/6] arm64: dts: ti: k3-am642-evm: Enable PCIe and SERDES

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210517061739.5762-5-kishon@ti.com>
Date:   Mon, 17 May 2021 11:47:37 +0530
From:   Kishon Vijay Abraham I <kishon@...com>
To:     Nishanth Menon <nm@...com>, Tero Kristo <kristo@...nel.org>,
        Rob Herring <robh+dt@...nel.org>
CC:     <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        Kishon Vijay Abraham I <kishon@...com>,
        Lokesh Vutla <lokeshvutla@...com>, <a-govindraju@...com>
Subject: [PATCH v2 4/6] arm64: dts: ti: k3-am642-evm: Enable PCIe and SERDES

AM642 EVM has a x4 lane PCIe connector. Enable PCIe in RC mode here.

Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
---
 arch/arm64/boot/dts/ti/k3-am642-evm.dts | 30 +++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index dad0efa961ed..8c27f563a390 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -5,6 +5,8 @@
 
 /dts-v1/;
 
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/mux/ti-serdes.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/net/ti-dp83867.h>
@@ -466,3 +468,31 @@
 &mailbox0_cluster7 {
 	status = "disabled";
 };
+
+&serdes_ln_ctrl {
+	idle-states = <AM64_SERDES0_LANE0_PCIE0>;
+};
+
+&serdes0 {
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&pcie0_rc {
+	reset-gpios = <&exp1 5 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+};
+
+&pcie0_ep {
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+	status = "disabled";
+};
-- 
2.17.1