[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210517171205.1581938-8-abelvesa@kernel.org>
Date: Mon, 17 May 2021 20:12:05 +0300
From: abelvesa@...nel.org
To: Rob Herring <robh@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
Jacky Bai <ping.bai@....com>,
Dong Aisheng <aisheng.dong@....com>
Cc: NXP Linux Team <linux-imx@....com>, devicetree@...r.kernel.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-arm-kernel@...ts.infradead.org, Abel Vesa <abel.vesa@....com>
Subject: [PATCH 7/7] arm64: dts: imx8dxl: Add i.MX8DXL evk board support
From: Jacky Bai <ping.bai@....com>
Add i.MX8DXL EVK board support.
Signed-off-by: Jacky Bai <ping.bai@....com>
Signed-off-by: Abel Vesa <abel.vesa@....com>
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 429 ++++++++++++++++++
2 files changed, 430 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 44890d56c194..feaa7b4054ce 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -60,6 +60,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
new file mode 100644
index 000000000000..28ab4fd76aaa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -0,0 +1,429 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2021 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8dxl.dtsi"
+
+/ {
+ model = "Freescale i.MX8DXL EVK";
+ compatible = "fsl,imx8dxl-evk", "fsl,imx8dxl";
+
+ chosen {
+ stdout-path = &lpuart0;
+ };
+
+ memory@...00000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /*
+ * 0x8800_0000 ~ 0x8FFF_FFFF is reserved for M4
+ * Shouldn't be used at A core and Linux side.
+ *
+ */
+ m4_reserved: m4@...8000000 {
+ no-map;
+ reg = <0 0x88000000 0 0x8000000>;
+ };
+
+ rpmsg_reserved: rpmsg@...0200000 {
+ no-map;
+ reg = <0 0x90200000 0 0x200000>;
+ };
+
+ /* global autoconfigured region for contiguous allocations */
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0 0x14000000>;
+ alloc-ranges = <0 0x98000000 0 0x14000000>;
+ linux,cma-default;
+ };
+
+ vdev0vring0: vdev0vring0@...00000 {
+ reg = <0 0x90000000 0 0x8000>;
+ no-map;
+ };
+
+ vdev0vring1: vdev0vring1@...08000 {
+ reg = <0 0x90008000 0 0x8000>;
+ no-map;
+ };
+
+ vdev1vring0: vdev1vring0@...10000 {
+ reg = <0 0x90010000 0 0x8000>;
+ no-map;
+ };
+
+ vdev1vring1: vdev1vring1@...18000 {
+ reg = <0 0x90018000 0 0x8000>;
+ no-map;
+ };
+
+ vdevbuffer: vdevbuffer {
+ compatible = "shared-dma-pool";
+ reg = <0 0x90400000 0 0x100000>;
+ no-map;
+ };
+ };
+
+ modem_reset: modem-reset {
+ compatible = "gpio-reset";
+ reset-gpios = <&pca6416_2 0 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <2000>;
+ reset-post-delay-ms = <40>;
+ #reset-cells = <0>;
+ };
+
+ reg_usdhc2_vmmc: usdhc2-vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "SD1_SPWR";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&lsio_gpio4 30 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ off-on-delay-us = <3480>;
+ };
+};
+
+&imx8dxl_cm4 {
+ memory-region = <&vdev0vring0>, <&vdev0vring1>, <&vdevbuffer>,
+ <&vdev1vring0>, <&vdev1vring1>;
+ status = "disabled";
+};
+
+&i2c2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ pca6416_1: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pca6416_2: gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pca9548_1: pca9548@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+
+ max7322: gpio@68 {
+ compatible = "maxim,max7322";
+ reg = <0x68>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+ };
+
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+ };
+
+ i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x5>;
+ };
+
+ i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x6>;
+ };
+ };
+};
+
+&i2c3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ pca6416_3: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&lsio_gpio2>;
+ interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pca9548_2: pca9548@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+ };
+
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+ };
+ };
+};
+
+&lpuart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart0>;
+ status = "okay";
+};
+
+&lpuart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart1>;
+ resets = <&modem_reset>;
+ status = "okay";
+};
+
+&lsio_gpio4 {
+ status = "okay";
+};
+
+&lsio_gpio5 {
+ status = "okay";
+};
+
+&thermal_zones {
+ pmic-thermal0 {
+ polling-delay-passive = <250>;
+ polling-delay = <2000>;
+ thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
+ trips {
+ pmic_alert0: trip0 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ pmic_crit0: trip1 {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&pmic_alert0>;
+ cooling-device =
+ <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ bus-width = <8>;
+ no-sd;
+ no-sdio;
+ non-removable;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ bus-width = <4>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ cd-gpios = <&lsio_gpio5 1 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_HIGH>;
+ max-frequency = <100000000>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD 0x000514a0
+ IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHK_PAD 0x000014a0
+ IMX8DXL_SPI3_CS0_ADMA_ACM_MCLK_OUT1 0x0600004c
+ IMX8DXL_SNVS_TAMPER_OUT1_LSIO_GPIO2_IO05_IN 0x0600004c
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ IMX8DXL_SPI1_SCK_ADMA_I2C2_SDA 0x06000021
+ IMX8DXL_SPI1_SDO_ADMA_I2C2_SCL 0x06000021
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ IMX8DXL_SPI1_CS0_ADMA_I2C3_SDA 0x06000021
+ IMX8DXL_SPI1_SDI_ADMA_I2C3_SCL 0x06000021
+ >;
+ };
+
+ pinctrl_lpuart0: lpuart0grp {
+ fsl,pins = <
+ IMX8DXL_UART0_RX_ADMA_UART0_RX 0x06000020
+ IMX8DXL_UART0_TX_ADMA_UART0_TX 0x06000020
+ >;
+ };
+
+ pinctrl_lpuart1: lpuart1grp {
+ fsl,pins = <
+ IMX8DXL_UART1_TX_ADMA_UART1_TX 0x06000020
+ IMX8DXL_UART1_RX_ADMA_UART1_RX 0x06000020
+ IMX8DXL_UART1_RTS_B_ADMA_UART1_RTS_B 0x06000020
+ IMX8DXL_UART1_CTS_B_ADMA_UART1_CTS_B 0x06000020
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
+ IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021
+ IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021
+ IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021
+ IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021
+ IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021
+ IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021
+ IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021
+ IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021
+ IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021
+ IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
+ IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021
+ IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021
+ IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021
+ IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021
+ IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021
+ IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021
+ IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021
+ IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021
+ IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021
+ IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
+ IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021
+ IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021
+ IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021
+ IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021
+ IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021
+ IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021
+ IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021
+ IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021
+ IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021
+ IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ IMX8DXL_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30 0x00000040 /* RESET_B */
+ IMX8DXL_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00 0x00000021 /* WP */
+ IMX8DXL_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01 0x00000021 /* CD */
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK 0x06000041
+ IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3 0x00000021
+ IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT 0x00000021
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ fsl,pins = <
+ IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK 0x06000041
+ IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3 0x00000021
+ IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT 0x00000021
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ fsl,pins = <
+ IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK 0x06000041
+ IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3 0x00000021
+ IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT 0x00000021
+ >;
+ };
+};
--
2.31.1
Powered by blists - more mailing lists