linux-kernel - [PATCH v2 3/4] usb: typec: tcpm: Move TCPC to APPLY_RC state during PR

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210517192112.40934-3-badhri@google.com>
Date:   Mon, 17 May 2021 12:21:11 -0700
From:   Badhri Jagan Sridharan <badhri@...gle.com>
To:     Guenter Roeck <linux@...ck-us.net>,
        Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc:     linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
        Kyle Tso <kyletso@...gle.com>, stable@...r.kernel.org,
        Badhri Jagan Sridharan <badhri@...gle.com>
Subject: [PATCH v2 3/4] usb: typec: tcpm: Move TCPC to APPLY_RC state during PR_SWAP

When vbus auto discharge is enabled, TCPCI based TCPC transitions
into Attached.SNK/Attached.SRC state. During PR_SWAP, TCPCI based
TCPC would disconnect when partner changes power roles. TCPC has
to be moved APPLY RC state during PR_SWAP. This is done by
ROLE_CONTROL.CC1 != ROLE_CONTROL.CC2 and
POWER_CONTROL.AutodischargeDisconnect is 0. Once the swap sequence
is done, AutoDischargeDisconnect is re-enabled.

Fixes: f321a02caebd ("usb: typec: tcpm: Implement enabling Auto Discharge disconnect support")
Signed-off-by: Badhri Jagan Sridharan <badhri@...gle.com>
---
Changes since v1:
- Added additional check port->tcpc->apply_rc as suggested by Guenter
  Roeck
---
 drivers/usb/typec/tcpm/tcpm.c | 16 ++++++++++++++++
 include/linux/usb/tcpm.h      |  4 ++++
 2 files changed, 20 insertions(+)

diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index b475d9b9d38d..3c2cade986c9 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -786,6 +786,19 @@ static int tcpm_enable_auto_vbus_discharge(struct tcpm_port *port, bool enable)
 	return ret;
 }
 
+static void tcpm_apply_rc(struct tcpm_port *port)
+{
+	/*
+	 * TCPCI: Move to APPLY_RC state to prevent disconnect during PR_SWAP
+	 * when Vbus auto discharge on disconnect is enabled.
+	 */
+	if (port->tcpc->enable_auto_vbus_discharge && port->tcpc->apply_rc) {
+		tcpm_log(port, "Apply_RC");
+		port->tcpc->apply_rc(port->tcpc, port->cc_req, port->polarity);
+		tcpm_enable_auto_vbus_discharge(port, false);
+	}
+}
+
 /*
  * Determine RP value to set based on maximum current supported
  * by a port if configured as source.
@@ -4428,6 +4441,7 @@ static void run_state_machine(struct tcpm_port *port)
 		tcpm_set_state(port, ready_state(port), 0);
 		break;
 	case PR_SWAP_START:
+		tcpm_apply_rc(port);
 		if (port->pwr_role == TYPEC_SOURCE)
 			tcpm_set_state(port, PR_SWAP_SRC_SNK_TRANSITION_OFF,
 				       PD_T_SRC_TRANSITION);
@@ -4467,6 +4481,7 @@ static void run_state_machine(struct tcpm_port *port)
 		tcpm_set_state(port, ERROR_RECOVERY, PD_T_PS_SOURCE_ON_PRS);
 		break;
 	case PR_SWAP_SRC_SNK_SINK_ON:
+		tcpm_enable_auto_vbus_discharge(port, true);
 		/* Set the vbus disconnect threshold for implicit contract */
 		tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, false, VSAFE5V);
 		tcpm_set_state(port, SNK_STARTUP, 0);
@@ -4483,6 +4498,7 @@ static void run_state_machine(struct tcpm_port *port)
 			       PD_T_PS_SOURCE_OFF);
 		break;
 	case PR_SWAP_SNK_SRC_SOURCE_ON:
+		tcpm_enable_auto_vbus_discharge(port, true);
 		tcpm_set_cc(port, tcpm_rp_cc(port));
 		tcpm_set_vbus(port, true);
 		/*
diff --git a/include/linux/usb/tcpm.h b/include/linux/usb/tcpm.h
index 42fcfbe10590..bffc8d3e14ad 100644
--- a/include/linux/usb/tcpm.h
+++ b/include/linux/usb/tcpm.h
@@ -66,6 +66,8 @@ enum tcpm_transmit_type {
  *		For example, some tcpcs may include BC1.2 charger detection
  *		and use that in this case.
  * @set_cc:	Called to set value of CC pins
+ * @apply_rc:	Optional; Needed to move TCPCI based chipset to APPLY_RC state
+ *		as stated by the TCPCI specification.
  * @get_cc:	Called to read current CC pin values
  * @set_polarity:
  *		Called to set polarity
@@ -120,6 +122,8 @@ struct tcpc_dev {
 	int (*get_vbus)(struct tcpc_dev *dev);
 	int (*get_current_limit)(struct tcpc_dev *dev);
 	int (*set_cc)(struct tcpc_dev *dev, enum typec_cc_status cc);
+	int (*apply_rc)(struct tcpc_dev *dev, enum typec_cc_status cc,
+			enum typec_cc_polarity polarity);
 	int (*get_cc)(struct tcpc_dev *dev, enum typec_cc_status *cc1,
 		      enum typec_cc_status *cc2);
 	int (*set_polarity)(struct tcpc_dev *dev,
-- 
2.31.1.751.gd2f1c929bd-goog