| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210517223113.GA3302542@robh.at.kernel.org>
Date: Mon, 17 May 2021 17:31:13 -0500
From: Rob Herring <robh@...nel.org>
To: Sander Vanheule <sander@...nheule.net>
Cc: Pavel Machek <pavel@....cz>, Lee Jones <lee.jones@...aro.org>,
Linus Walleij <linus.walleij@...aro.org>,
linux-leds@...r.kernel.org, devicetree@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/5] dt-bindings: leds: Binding for RTL8231 scan matrix
On Tue, May 11, 2021 at 02:25:19PM +0200, Sander Vanheule wrote:
> Add a binding description for the Realtek RTL8231's LED support, which
> consists of up to 88 LEDs arranged in a number of scanning matrices.
>
> Signed-off-by: Sander Vanheule <sander@...nheule.net>
> ---
> .../bindings/leds/realtek,rtl8231-leds.yaml | 159 ++++++++++++++++++
> 1 file changed, 159 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/realtek,rtl8231-leds.yaml
>
> diff --git a/Documentation/devicetree/bindings/leds/realtek,rtl8231-leds.yaml b/Documentation/devicetree/bindings/leds/realtek,rtl8231-leds.yaml
> new file mode 100644
> index 000000000000..aba2b55fb9c9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/realtek,rtl8231-leds.yaml
> @@ -0,0 +1,159 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/realtek,rtl8231-leds.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Realtek RTL8231 LED scan matrix.
> +
> +maintainers:
> + - Sander Vanheule <sander@...nheule.net>
> +
> +description: |
> + The RTL8231 has support for driving a number of LED matrices, by scanning
> + over the LEDs pins, alternatingly lighting different columns and/or rows.
> +
> + In single color scan mode, 88 LEDs are supported. These are grouped into
> + three output matrices:
> + - Group A of 6×6 single color LEDs. Rows and columns are driven by GPIO
> + pins 0-11.
> + L0[n] L1[n] L2[n] L0[n+6] L1[n+6] L2[n+6]
> + | | | | | |
> + P0/P6 --<--------<--------<--------<--------<--------< (3)
> + | | | | | |
> + P1/P7 --<--------<--------<--------<--------<--------< (4)
> + | | | | | |
> + P2/P8 --<--------<--------<--------<--------<--------< (5)
> + | | | | | |
> + P3/P9 --<--------<--------<--------<--------<--------< (6)
> + | | | | | |
> + P4/P10 --<--------<--------<--------<--------<--------< (7)
> + | | | | | |
> + P5/P11 --<--------<--------<--------<--------<--------< (8)
> + (0) (1) (2) (9) (10) (11)
> + - Group B of 6×6 single color LEDs. Rows and columns are driven by GPIO
> + pins 12-23.
> + L0[n] L1[n] L2[n] L0[n+6] L1[n+6] L2[n+6]
> + | | | | | |
> + P12/P18 --<--------<--------<--------<--------<--------< (15)
> + | | | | | |
> + P13/P19 --<--------<--------<--------<--------<--------< (16)
> + | | | | | |
> + P14/P20 --<--------<--------<--------<--------<--------< (17)
> + | | | | | |
> + P15/P21 --<--------<--------<--------<--------<--------< (18)
> + | | | | | |
> + P16/P22 --<--------<--------<--------<--------<--------< (19)
> + | | | | | |
> + P17/P23 --<--------<--------<--------<--------<--------< (20)
> + (12) (13) (14) (21) (22) (23)
> + - Group C of 8 pairs of anti-parallel (or bi-color) LEDs. LED selection is
> + provided by GPIO pins 24-27 and 29-32, polarity selection by GPIO 28.
> + P24 P25 ... P30 P31
> + | | | |
> + LED POL --X-------X---/\/---X-------X (28)
> + (24) (25) ... (31) (32)
> +
> + In bi-color scan mode, 72 LEDs are supported. These are grouped into four
> + output matrices:
> + - Group A of 12 pairs of anti-parallel LEDs. LED selection is provided
> + by GPIO pins 0-11, polarity selection by GPIO 12.
> + - Group B of 6 pairs of anti-parallel LEDs. LED selection is provided
> + by GPIO pins 23-28, polarity selection by GPIO 21.
> + - Group C of 6 pairs of anti-parallel LEDs. LED selection is provided
> + by GPIO pins 29-34, polarity selection by GPIO 22.
> + - Group of 4×6 single color LEDs. Rows are driven by GPIO pins 15-20,
> + columns by GPIO pins 13-14 and 21-22 (shared with groups B and C).
> + P[n] P[n+6] P[n+12] P[n+18]
> + | | | |
> + +0 --<--------<--------<--------< (15)
> + | | | |
> + +1 --<--------<--------<--------< (16)
> + | | | |
> + +2 --<--------<--------<--------< (17)
> + | | | |
> + +3 --<--------<--------<--------< (18)
> + | | | |
> + +4 --<--------<--------<--------< (19)
> + | | | |
> + +6 --<--------<--------<--------< (20)
> + (13) (14) (21) (22)
> +
> + This node must always be a child of a 'realtek,rtl8231' node.
> +
> +properties:
> + $nodename:
> + const: leds
led-controller
> +
> + compatible:
> + const: realtek,rtl8231-leds
How is this device controlled?
> +
> + "#address-cells":
> + const: 2
> +
> + "#size-cells":
> + const: 0
> +
> + realtek,led-scan-mode:
> + $ref: /schemas/types.yaml#/definitions/string
> + description: |
> + Specify the scanning mode the chip should run in. See general description
> + for how the scanning matrices are wired up.
> + enum: ["single-color", "bi-color"]
> +
> +patternProperties:
> + "^led@[0-9]+,[0-2]$":
> + description: |
> + LEDs are addressed by their port index and led index. Ports 0-23 always
> + support three LEDs. Additionally, but only when used in single color scan
> + mode, ports 24-31 support two LEDs.
Normally unit-addresses are hex values.
> + type: object
> +
> + properties:
> + reg:
> + maxItems: 1
This should have more constraints:
reg:
items:
- items:
- description: port index
maximum: 31
- description: led index
maximum: 2
> +
> + allOf:
> + - $ref: ../leds/common.yaml#
> +
> + required:
> + - reg
> +
> +required:
> + - compatible
> + - "#address-cells"
> + - "#size-cells"
> + - realtek,led-scan-mode
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/leds/common.h>
> + leds {
> + compatible = "realtek,rtl8231-leds";
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + realtek,led-scan-mode = "single-color";
> +
> + led@0,0 {
> + reg = <0 0>;
> + color = <LED_COLOR_ID_GREEN>;
> + function = LED_FUNCTION_LAN;
> + function-enumerator = <0>;
> + };
> +
> + led@0,1 {
> + reg = <0 1>;
> + color = <LED_COLOR_ID_AMBER>;
> + function = LED_FUNCTION_LAN;
> + function-enumerator = <0>;
> + };
> +
> + led@0,2 {
> + reg = <0 2>;
> + color = <LED_COLOR_ID_GREEN>;
> + function = LED_FUNCTION_STATUS;
> + };
> + };
> --
> 2.31.1
>
Powered by blists - more mailing lists