linux-kernel - [PATCH v2] serial: liteuart: Add support for earlycon

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 17 May 2021 20:54:52 +0900
From:   Stafford Horne <shorne@...il.com>
To:     LKML <linux-kernel@...r.kernel.org>
Cc:     jirislaby@...nel.org, Stafford Horne <shorne@...il.com>,
        Florent Kermarrec <florent@...oy-digital.fr>,
        Mateusz Holenko <mholenko@...micro.com>,
        Joel Stanley <joel@....id.au>,
        "Gabriel L . Somlo" <gsomlo@...il.com>,
        Jonathan Corbet <corbet@....net>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Karol Gugala <kgugala@...micro.com>,
        "Paul E. McKenney" <paulmck@...nel.org>,
        Randy Dunlap <rdunlap@...radead.org>,
        Andrew Morton <akpm@...ux-foundation.org>,
        Thomas Gleixner <tglx@...utronix.de>,
        Vlastimil Babka <vbabka@...e.cz>,
        Viresh Kumar <viresh.kumar@...aro.org>,
        Mike Kravetz <mike.kravetz@...cle.com>,
        Peter Zijlstra <peterz@...radead.org>,
        linux-doc@...r.kernel.org, linux-serial@...r.kernel.org
Subject: [PATCH v2] serial: liteuart: Add support for earlycon

Most litex boards using RISC-V soft cores us the sbi earlycon, however
this is not available for non RISC-V litex SoC's.  This patch enables
earlycon for liteuart which is available on all Litex SoC's making
support for earycon debugging more widely available.

Signed-off-by: Stafford Horne <shorne@...il.com>
Cc: Florent Kermarrec <florent@...oy-digital.fr>
Cc: Mateusz Holenko <mholenko@...micro.com>
Cc: Joel Stanley <joel@....id.au>
Cc: Gabriel L. Somlo <gsomlo@...il.com>
Reviewed-and-tested-by: Gabriel Somlo <gsomlo@...il.com>
---
Changes since v1:
 - Fixed subject
 - Fixed ifdef and config issues pointed out by Jiri
 - Use liteuart_putchar instead of early_liteuart_putc

 .../admin-guide/kernel-parameters.txt         |  5 +++++
 drivers/tty/serial/Kconfig                    |  1 +
 drivers/tty/serial/liteuart.c                 | 21 +++++++++++++++++++
 3 files changed, 27 insertions(+)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 04545725f187..2d4a43af8de2 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1084,6 +1084,11 @@
 			the driver will use only 32-bit accessors to read/write
 			the device registers.
 
+		liteuart,<addr>
+			Start an early console on a litex serial port at the
+			specified address. The serial port must already be
+			setup and configured. Options are not yet supported.
+
 		meson,<addr>
 			Start an early, polled-mode console on a meson serial
 			port at the specified address. The serial port must
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 0c4cd4a348f4..af41e534483c 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1550,6 +1550,7 @@ config SERIAL_LITEUART_CONSOLE
 	bool "LiteUART serial port console support"
 	depends on SERIAL_LITEUART=y
 	select SERIAL_CORE_CONSOLE
+	select SERIAL_EARLYCON
 	help
 	  Say 'Y' or 'M' here if you wish to use the FPGA-based LiteUART serial
 	  controller from LiteX SoC builder as the system console
diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c
index 64842f3539e1..1b75a4bf7c56 100644
--- a/drivers/tty/serial/liteuart.c
+++ b/drivers/tty/serial/liteuart.c
@@ -370,6 +370,27 @@ static int __init liteuart_console_init(void)
 	return 0;
 }
 console_initcall(liteuart_console_init);
+
+static void early_liteuart_write(struct console *console, const char *s,
+				    unsigned int count)
+{
+	struct earlycon_device *device = console->data;
+	struct uart_port *port = &device->port;
+
+	uart_console_write(port, s, count, liteuart_putchar);
+}
+
+static int __init early_liteuart_setup(struct earlycon_device *device,
+				       const char *options)
+{
+	if (!device->port.membase)
+		return -ENODEV;
+
+	device->con->write = early_liteuart_write;
+	return 0;
+}
+
+OF_EARLYCON_DECLARE(liteuart, "litex,liteuart", early_liteuart_setup);
 #endif /* CONFIG_SERIAL_LITEUART_CONSOLE */
 
 static int __init liteuart_init(void)
-- 
2.31.1