| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210517125909.12024-4-o.rempel@pengutronix.de>
Date: Mon, 17 May 2021 14:59:09 +0200
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Dmitry Torokhov <dmitry.torokhov@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Jonathan Cameron <Jonathan.Cameron@...wei.com>
Cc: Oleksij Rempel <o.rempel@...gutronix.de>, kernel@...gutronix.de,
linux-kernel@...r.kernel.org, linux-input@...r.kernel.org,
David Jander <david@...tonic.nl>, devicetree@...r.kernel.org
Subject: [RFC PATCH v1 3/3] Input: resistive-adc-touch: add support for z1 and z2 channels
Typical touchscreen do not report pressure. Instead, it is calculated by
measuring resistance of touchscreen plates on different reference
points. Some ADC controllers, for example TI TSC2046, can provide this
measurements. With this patch resistive-adc-touch will be able to use it
and calculate pressure out if measured resistance.
Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
---
.../input/touchscreen/resistive-adc-touch.c | 142 ++++++++++++++++--
1 file changed, 129 insertions(+), 13 deletions(-)
diff --git a/drivers/input/touchscreen/resistive-adc-touch.c b/drivers/input/touchscreen/resistive-adc-touch.c
index e50af30183f4..f53f8a7fd186 100644
--- a/drivers/input/touchscreen/resistive-adc-touch.c
+++ b/drivers/input/touchscreen/resistive-adc-touch.c
@@ -20,7 +20,18 @@
#define DRIVER_NAME "resistive-adc-touch"
#define GRTS_DEFAULT_PRESSURE_MIN 50000
+#define GRTS_DEFAULT_PRESSURE_MAX 65535
#define GRTS_MAX_POS_MASK GENMASK(11, 0)
+#define GRTS_MAX_CHANNELS 4
+
+enum grts_ch_type {
+ GRTS_CH_NONE = 0,
+ GRTS_CH_X,
+ GRTS_CH_Y,
+ GRTS_CH_PRESSURE,
+ GRTS_CH_Z1,
+ GRTS_CH_Z2,
+};
/**
* struct grts_state - generic resistive touch screen information struct
@@ -33,24 +44,61 @@
*/
struct grts_state {
u32 pressure_min;
+ u32 x_plate_ohms;
bool pressure;
struct iio_channel *iio_chans;
struct iio_cb_buffer *iio_cb;
struct input_dev *input;
struct touchscreen_properties prop;
+ enum grts_ch_type ch[GRTS_MAX_CHANNELS];
};
static int grts_cb(const void *data, void *private)
{
const u16 *touch_info = data;
struct grts_state *st = private;
- unsigned int x, y, press = 0x0;
+ unsigned int x, y, press = 0x0, z1, z2;
+ unsigned int Rt;
+ unsigned int idx;
+
+ for (idx = 0; st->ch[idx] != GRTS_CH_NONE; idx++) {
+ switch (st->ch[idx]) {
+ case GRTS_CH_X:
+ x = touch_info[idx];
+ break;
+ case GRTS_CH_Y:
+ y = touch_info[idx];
+ break;
+ case GRTS_CH_PRESSURE:
+ press = touch_info[idx];
+ break;
+ case GRTS_CH_Z1:
+ z1 = touch_info[idx];
+ break;
+ case GRTS_CH_Z2:
+ z2 = touch_info[idx];
+ break;
+ case GRTS_CH_NONE:
+ break;
+ }
+ }
- /* channel data coming in buffer in the order below */
- x = touch_info[0];
- y = touch_info[1];
- if (st->pressure)
- press = touch_info[2];
+ if (z1) {
+ Rt = z2;
+ Rt -= z1;
+ Rt *= st->x_plate_ohms;
+ Rt = DIV_ROUND_CLOSEST(Rt, 16);
+ Rt *= x;
+ Rt /= z1;
+ Rt = DIV_ROUND_CLOSEST(Rt, 256);
+ /* On increased pressure the resistance (Rt) is decreasing
+ * so, convert values to make it looks as real pressure.
+ */
+ if (Rt < GRTS_DEFAULT_PRESSURE_MAX)
+ press = GRTS_DEFAULT_PRESSURE_MAX - Rt;
+ else
+ press = 0;
+ }
if ((!x && !y) || (st->pressure && (press < st->pressure_min))) {
/* report end of touch */
@@ -94,6 +142,73 @@ static void grts_disable(void *data)
iio_channel_release_all_cb(data);
}
+static int grts_get_properties(struct grts_state *st, struct device *dev)
+{
+ int idx;
+
+ idx = device_property_match_string(dev, "io-channel-names", "x");
+ if (idx < 0)
+ return idx;
+
+ if (idx >= GRTS_MAX_CHANNELS)
+ return -EOVERFLOW;
+
+ st->ch[idx] = GRTS_CH_X;
+
+ idx = device_property_match_string(dev, "io-channel-names", "y");
+ if (idx < 0)
+ return idx;
+
+ if (idx >= GRTS_MAX_CHANNELS)
+ return -EOVERFLOW;
+
+ st->ch[idx] = GRTS_CH_Y;
+
+ /* pressure is optional */
+ idx = device_property_match_string(dev, "io-channel-names", "pressure");
+ if (idx >= 0) {
+ if (idx >= GRTS_MAX_CHANNELS)
+ return -EOVERFLOW;
+
+ st->ch[idx] = GRTS_CH_PRESSURE;
+ st->pressure = true;
+
+ return 0;
+ }
+
+ /* if no pressure is defined, try optional z1 + z2 */
+ idx = device_property_match_string(dev, "io-channel-names", "z1");
+ if (idx >= 0) {
+ int error;
+
+ if (idx >= GRTS_MAX_CHANNELS)
+ return -EOVERFLOW;
+
+ st->ch[idx] = GRTS_CH_Z1;
+
+ /* if z1 is provided z2 is not optional */
+ idx = device_property_match_string(dev, "io-channel-names", "z2");
+ if (idx < 0)
+ return idx;
+
+ if (idx >= GRTS_MAX_CHANNELS)
+ return -EOVERFLOW;
+
+ st->ch[idx] = GRTS_CH_Z2;
+ st->pressure = true;
+
+ error = device_property_read_u32(dev,
+ "touchscreen-x-plate-ohms",
+ &st->x_plate_ohms);
+ if (error) {
+ dev_err(dev, "can't get touchscreen-x-plate-ohms property\n");
+ return error;
+ }
+ }
+
+ return 0;
+}
+
static int grts_probe(struct platform_device *pdev)
{
struct grts_state *st;
@@ -115,12 +230,13 @@ static int grts_probe(struct platform_device *pdev)
return error;
}
- chan = &st->iio_chans[0];
- st->pressure = false;
- while (chan && chan->indio_dev) {
- if (!strcmp(chan->channel->datasheet_name, "pressure"))
- st->pressure = true;
- chan++;
+ if (!device_property_present(dev, "io-channel-names"))
+ return -ENODEV;
+
+ error = grts_get_properties(st, dev);
+ if (error) {
+ dev_err(dev, "Failed to parse properties\n");
+ return error;
}
if (st->pressure) {
@@ -148,7 +264,7 @@ static int grts_probe(struct platform_device *pdev)
input_set_abs_params(input, ABS_Y, 0, GRTS_MAX_POS_MASK - 1, 0, 0);
if (st->pressure)
input_set_abs_params(input, ABS_PRESSURE, st->pressure_min,
- 0xffff, 0, 0);
+ GRTS_DEFAULT_PRESSURE_MAX, 0, 0);
input_set_capability(input, EV_KEY, BTN_TOUCH);
--
2.29.2
Powered by blists - more mailing lists