[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210517140305.813692170@linuxfoundation.org>
Date: Mon, 17 May 2021 15:59:21 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, David Mosberger-Tang <davidm@...uge.net>,
Kalle Valo <kvalo@...eaurora.org>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.12 095/363] wilc1000: Bring MAC address setting in line with typical Linux behavior
From: David Mosberger-Tang <davidm@...uge.net>
[ Upstream commit a381b78a1598dde34a6e40dae2842024308a6ef2 ]
Linux network drivers normally disallow changing the MAC address when
the interface is up. This driver has been different in that it allows
to change the MAC address *only* when it's up. This patch brings
wilc1000 behavior more in line with other network drivers. We could
have replaced wilc_set_mac_addr() with eth_mac_addr() but that would
break existing documentation on how to change the MAC address.
Likewise, return -EADDRNOTAVAIL (not -EINVAL) when the specified MAC
address is invalid or unavailable.
Signed-off-by: David Mosberger-Tang <davidm@...uge.net>
Signed-off-by: Kalle Valo <kvalo@...eaurora.org>
Link: https://lore.kernel.org/r/20210303194846.1823596-1-davidm@egauge.net
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
.../net/wireless/microchip/wilc1000/netdev.c | 25 ++++++++++++-------
1 file changed, 16 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/microchip/wilc1000/netdev.c b/drivers/net/wireless/microchip/wilc1000/netdev.c
index 1b205e7d97a8..37f40039e4ca 100644
--- a/drivers/net/wireless/microchip/wilc1000/netdev.c
+++ b/drivers/net/wireless/microchip/wilc1000/netdev.c
@@ -575,7 +575,6 @@ static int wilc_mac_open(struct net_device *ndev)
{
struct wilc_vif *vif = netdev_priv(ndev);
struct wilc *wl = vif->wilc;
- unsigned char mac_add[ETH_ALEN] = {0};
int ret = 0;
struct mgmt_frame_regs mgmt_regs = {};
@@ -598,9 +597,12 @@ static int wilc_mac_open(struct net_device *ndev)
wilc_set_operation_mode(vif, wilc_get_vif_idx(vif), vif->iftype,
vif->idx);
- wilc_get_mac_address(vif, mac_add);
- netdev_dbg(ndev, "Mac address: %pM\n", mac_add);
- ether_addr_copy(ndev->dev_addr, mac_add);
+
+ if (is_valid_ether_addr(ndev->dev_addr))
+ wilc_set_mac_address(vif, ndev->dev_addr);
+ else
+ wilc_get_mac_address(vif, ndev->dev_addr);
+ netdev_dbg(ndev, "Mac address: %pM\n", ndev->dev_addr);
if (!is_valid_ether_addr(ndev->dev_addr)) {
netdev_err(ndev, "Wrong MAC address\n");
@@ -639,7 +641,14 @@ static int wilc_set_mac_addr(struct net_device *dev, void *p)
int srcu_idx;
if (!is_valid_ether_addr(addr->sa_data))
- return -EINVAL;
+ return -EADDRNOTAVAIL;
+
+ if (!vif->mac_opened) {
+ eth_commit_mac_addr_change(dev, p);
+ return 0;
+ }
+
+ /* Verify MAC Address is not already in use: */
srcu_idx = srcu_read_lock(&wilc->srcu);
list_for_each_entry_rcu(tmp_vif, &wilc->vif_list, list) {
@@ -647,7 +656,7 @@ static int wilc_set_mac_addr(struct net_device *dev, void *p)
if (ether_addr_equal(addr->sa_data, mac_addr)) {
if (vif != tmp_vif) {
srcu_read_unlock(&wilc->srcu, srcu_idx);
- return -EINVAL;
+ return -EADDRNOTAVAIL;
}
srcu_read_unlock(&wilc->srcu, srcu_idx);
return 0;
@@ -659,9 +668,7 @@ static int wilc_set_mac_addr(struct net_device *dev, void *p)
if (result)
return result;
- ether_addr_copy(vif->bssid, addr->sa_data);
- ether_addr_copy(vif->ndev->dev_addr, addr->sa_data);
-
+ eth_commit_mac_addr_change(dev, p);
return result;
}
--
2.30.2
Powered by blists - more mailing lists