| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <AM6PR04MB4966AD2DAA6C27F714349F9F802C9@AM6PR04MB4966.eurprd04.prod.outlook.com>
Date: Tue, 18 May 2021 07:13:32 +0000
From: Aisheng Dong <aisheng.dong@....com>
To: Abel Vesa <abelvesa@...nel.org>, Shawn Guo <shawnguo@...nel.org>
CC: "Mirela Rabulea (OSS)" <mirela.rabulea@....nxp.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"G.n. Zhou" <guoniu.zhou@....com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
Peng Fan <peng.fan@....com>,
"s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
dl-linux-imx <linux-imx@....com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"mchehab@...nel.org" <mchehab@...nel.org>,
"hverkuil-cisco@...all.nl" <hverkuil-cisco@...all.nl>,
"linux-media@...r.kernel.org" <linux-media@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"paul.kocialkowski@...tlin.com" <paul.kocialkowski@...tlin.com>,
Daniel Baluta <daniel.baluta@....com>,
Robert Chiras <robert.chiras@....com>,
Laurentiu Palcu <laurentiu.palcu@....com>,
"p.zabel@...gutronix.de" <p.zabel@...gutronix.de>,
"ezequiel@...labora.com" <ezequiel@...labora.com>,
Mirela Rabulea <mirela.rabulea@....com>
Subject: RE: [PATCH v11] arm64: dts: imx8qxp: Add jpeg encoder/decoder nodes
> From: Abel Vesa <abelvesa@...nel.org>
> Sent: Friday, May 14, 2021 6:25 PM
>
> On 21-05-13 15:38:33, Shawn Guo wrote:
> > On Fri, Apr 23, 2021 at 01:14:14PM +0300, Mirela Rabulea (OSS) wrote:
> > > From: Mirela Rabulea <mirela.rabulea@....com>
> > >
> > > Add dts for imaging subsytem, include jpeg nodes here.
> > > Tested on imx8qxp only, should work on imx8qm, but it was not tested.
> > >
> > > Signed-off-by: Mirela Rabulea <mirela.rabulea@....com>
> >
> > So the bindings and driver parts have been accepted already?
> >
> > > ---
> > > Changes in v11:
> > > Adress feedback from Aisheng Dong:
> > > - Rename img_jpeg_dec_clk/img_jpeg_enc_clk to
> jpeg_dec_lpcg/jpeg_enc_lpcg to make it visible it's lpcg not other type of clk
> > > - Drop the cameradev node, not needed for jpeg
> > > - Match assigned-clocks & assigned-clock-rates
> > >
> > > .../arm64/boot/dts/freescale/imx8-ss-img.dtsi | 82
> +++++++++++++++++++
> > > arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 1 +
> > > 2 files changed, 83 insertions(+)
> > > create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
> > >
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
> > > b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
> > > new file mode 100644
> > > index 000000000000..c508e5d0c92b
> > > --- /dev/null
> > > +++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
> > > @@ -0,0 +1,82 @@
> > > +// SPDX-License-Identifier: GPL-2.0+
> > > +/*
> > > + * Copyright 2019-2021 NXP
> > > + * Zhou Guoniu <guoniu.zhou@....com> */
> > > +img_subsys: bus@...00000 {
> > > + compatible = "simple-bus";
> > > + #address-cells = <1>;
> > > + #size-cells = <1>;
> > > + ranges = <0x58000000 0x0 0x58000000 0x1000000>;
> > > +
> > > + img_ipg_clk: clock-img-ipg {
> > > + compatible = "fixed-clock";
> > > + #clock-cells = <0>;
> > > + clock-frequency = <200000000>;
> > > + clock-output-names = "img_ipg_clk";
> > > + };
> >
> > Hmm, not sure a fixed-clock should be in the subsystem.
> >
>
> Agreed. Assuming the img_ipg_clk is only used on 8QXP, you could move it
> into imx8qxp-ss-img.dtsi. This way every other platform that uses this ss file
> will not be impacted.
>
Imx_ipg_clk is used in this patch.
Here we define subsys.dtsi mostly based on MX8QXP.
MX8QM can overwrite it in QM subsys.dtsi if needed.
Regards
Aisheng
> > > +
> > > + img_jpeg_dec_lpcg: clock-controller@...d0000 {
> > > + compatible = "fsl,imx8qxp-lpcg";
> > > + reg = <0x585d0000 0x10000>;
> > > + #clock-cells = <1>;
> > > + clocks = <&img_ipg_clk>, <&img_ipg_clk>;
> > > + clock-indices = <IMX_LPCG_CLK_0>,
> > > + <IMX_LPCG_CLK_4>;
> > > + clock-output-names = "img_jpeg_dec_lpcg_clk",
> > > + "img_jpeg_dec_lpcg_ipg_clk";
> > > + power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>;
> > > + };
> > > +
> > > + img_jpeg_enc_lpcg: clock-controller@...f0000 {
> > > + compatible = "fsl,imx8qxp-lpcg";
> > > + reg = <0x585f0000 0x10000>;
> > > + #clock-cells = <1>;
> > > + clocks = <&img_ipg_clk>, <&img_ipg_clk>;
> > > + clock-indices = <IMX_LPCG_CLK_0>,
> > > + <IMX_LPCG_CLK_4>;
> > > + clock-output-names = "img_jpeg_enc_lpcg_clk",
> > > + "img_jpeg_enc_lpcg_ipg_clk";
> > > + power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>;
> > > + };
> > > +
> > > + jpegdec: jpegdec@...00000 {
> >
> > Keep nodes sorted in unit address.
> >
> > Shawn
> >
> > > + compatible = "nxp,imx8qxp-jpgdec";
> > > + reg = <0x58400000 0x00050000 >;
> > > + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
> > > + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
> > > + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
> > > + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&img_jpeg_dec_lpcg 0>,
> > > + <&img_jpeg_dec_lpcg 1>;
> > > + clock-names = "per", "ipg";
> > > + assigned-clocks = <&img_jpeg_dec_lpcg 0>,
> > > + <&img_jpeg_dec_lpcg 1>;
> > > + assigned-clock-rates = <200000000>, <200000000>;
> > > + power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>,
> > > + <&pd IMX_SC_R_MJPEG_DEC_S0>,
> > > + <&pd IMX_SC_R_MJPEG_DEC_S1>,
> > > + <&pd IMX_SC_R_MJPEG_DEC_S2>,
> > > + <&pd IMX_SC_R_MJPEG_DEC_S3>;
> > > + };
> > > +
> > > + jpegenc: jpegenc@...50000 {
> > > + compatible = "nxp,imx8qxp-jpgenc";
> > > + reg = <0x58450000 0x00050000 >;
> > > + interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
> > > + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
> > > + <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
> > > + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&img_jpeg_enc_lpcg 0>,
> > > + <&img_jpeg_enc_lpcg 1>;
> > > + clock-names = "per", "ipg";
> > > + assigned-clocks = <&img_jpeg_enc_lpcg 0>,
> > > + <&img_jpeg_enc_lpcg 1>;
> > > + assigned-clock-rates = <200000000>, <200000000>;
> > > + power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>,
> > > + <&pd IMX_SC_R_MJPEG_ENC_S0>,
> > > + <&pd IMX_SC_R_MJPEG_ENC_S1>,
> > > + <&pd IMX_SC_R_MJPEG_ENC_S2>,
> > > + <&pd IMX_SC_R_MJPEG_ENC_S3>;
> > > + };
> > > +};
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > > b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > > index 1e6b4995091e..2d9589309bd0 100644
> > > --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > > +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > > @@ -258,6 +258,7 @@
> > > };
> > >
> > > /* sorted in register address */
> > > + #include "imx8-ss-img.dtsi"
> > > #include "imx8-ss-adma.dtsi"
> > > #include "imx8-ss-conn.dtsi"
> > > #include "imx8-ss-ddr.dtsi"
> > > --
> > > 2.17.1
> > >
Powered by blists - more mailing lists