[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20210518120133.73qmsd6uu6dwtjfu@backshift>
Date: Tue, 18 May 2021 07:01:33 -0500
From: Nishanth Menon <nm@...com>
To: Vaibhav Gupta <vaibhavgupta40@...il.com>
CC: Rob Herring <robh+dt@...nel.org>,
Kishon Vijay Abraham <kishon@...com>,
Sekhar Nori <nsekhar@...com>,
Lokesh Vutla <lokeshvutla@...com>,
Praneeth Bajjuri <praneeth@...com>,
Gowtham Tammana <g-tammana@...com>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2] arm64: dts: ti: k3-am64-main: Enable crypto
accelerator
On 11:56-20210518, Vaibhav Gupta wrote:
> From: Vaibhav Gupta <v_gupta@...com>
>
> Add the node for SA2UL including the random number generator.
>
> [v_gupta@...com: Add address ranges entry in cbass_main]
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@...com>
> Signed-off-by: Vaibhav Gupta <v_gupta@...com>
I see that you have missed the series Suman posted in [1]. It has a few
cleanups of interest.
> ---
> arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 25 ++++++++++++++++++++++++
> arch/arm64/boot/dts/ti/k3-am64.dtsi | 1 +
> 2 files changed, 26 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> index 25b702303637..adbc3c0673f3 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> @@ -160,6 +160,31 @@ k3_reset: reset-controller {
> };
> };
>
> + main_crypto: crypto@...00000 {
> + compatible = "ti,am64-sa2ul";
> + reg = <0x0 0x40900000 0x0 0x1200>;
> + power-domains = <&k3_pds 133 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 133 0>, <&k3_clks 133 1>, <&k3_clks 133 2>;
> + clock-names = "pka_in_clk" , "x1_clk" , "x2_clk";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x0 0x040900000 0x00 0x040900000 0x0 0x30000>;
> +
> + status = "okay";
drop this..
> +
> + dmas = <&main_pktdma 0xc001 15>, <&main_pktdma 0x4002 15>,
> + <&main_pktdma 0x4003 15>;
> + dma-names = "tx", "rx1", "rx2";
> +
> + eip76d_rng: rng@...10000 {
> + compatible = "inside-secure,safexcel-eip76";
> + reg = <0x0 0x40910000 0x0 0x80>;
> + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&k3_clks 133 2>;
> + clock-names = "x2_clk";
> + };
> + };
> +
> main_pmx0: pinctrl@...00 {
> compatible = "pinctrl-single";
> reg = <0x00 0xf4000 0x00 0x2d0>;
> diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi
> index 0ae8c844c482..e2bea44a16c5 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi
> @@ -85,6 +85,7 @@ cbass_main: bus@...00 {
> <0x00 0x78000000 0x00 0x78000000 0x00 0x00800000>, /* Main R5FSS */
> <0x06 0x00000000 0x06 0x00000000 0x01 0x00000000>, /* PCIe DAT1 */
> <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */
> + <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA2UL */
>
> /* MCU Domain Range */
> <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>;
I think you might have missed the discussion here:[1]
a) Could I suggest you co-ordinate with Suman as to which series should
I consider? Suman's looks a lot complete..
b) Considering the potential for TF-A booting Linux without u-boot on HS
devices, may I suggest making sure that the dts board files for evm have the
nodes disabled by default?
[1] https://lore.kernel.org/linux-arm-kernel/20210514221148.m42zldo6lfxn5l4m@underfed/
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D)/Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Powered by blists - more mailing lists