linux-kernel - Re: (subset) [PATCH v2 0/7] RTL8231 GPIO expander support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 19 May 2021 17:10:13 +0100
From:   Mark Brown <broonie@...nel.org>
To:     Rob Herring <robh+dt@...nel.org>,
        Sander Vanheule <sander@...nheule.net>,
        Bartosz Golaszewski <bgolaszewski@...libre.com>,
        devicetree@...r.kernel.org, Pavel Machek <pavel@....cz>,
        Lee Jones <lee.jones@...aro.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        linux-gpio@...r.kernel.org, Michael Walle <michael@...le.cc>,
        linux-leds@...r.kernel.org,
        "Rafael J . Wysocki" <rafael@...nel.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc:     Mark Brown <broonie@...nel.org>, linux-kernel@...r.kernel.org,
        Andy Shevchenko <andy.shevchenko@...il.com>,
        Andrew Lunn <andrew@...n.ch>
Subject: Re: (subset) [PATCH v2 0/7] RTL8231 GPIO expander support

On Mon, 17 May 2021 21:28:02 +0200, Sander Vanheule wrote:
> The RTL8231 GPIO and LED expander can be configured for use as an MDIO or SMI
> bus device. Currently only the MDIO mode is supported, although SMI mode
> support should be fairly straightforward, once an SMI bus driver is available.
> 
> Provided features by the RTL8231:
>   - Up to 37 GPIOs
>     - Configurable drive strength: 8mA or 4mA (currently unsupported)
>     - Input debouncing on high GPIOs (currently unsupported)
>   - Up to 88 LEDs in multiple scan matrix groups
>     - On, off, or one of six toggling intervals
>     - "single-color mode": 2×36 single color LEDs + 8 bi-color LEDs
>     - "bi-color mode": (12 + 2×6) bi-color LEDs + 24 single color LEDs
>   - Up to one PWM output (currently unsupported)
>     - Fixed duty cycle, 8 selectable frequencies (1.2kHz - 4.8kHz)
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git for-next

Thanks!

[1/7] regmap: Add MDIO bus support
      commit: 1f89d2fe16072a74b34bdb895160910091427891

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark