Date:   Wed, 19 May 2021 15:15:49 -0700
From:   Saravana Kannan <saravanak@...gle.com>
To:     Ondřej Jirman <megous@...ous.com>,
        Saravana Kannan <saravanak@...gle.com>,
        linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
        linux-sunxi@...ts.linux.dev, mripard@...nel.org, wens@...e.org,
        jernej.skrabec@...il.com,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        "Rafael J. Wysocki" <rafael@...nel.org>,
        LKML <linux-kernel@...r.kernel.org>, andre.przywara@....com
Subject: Re: fw_devlink=on and sunxi HDMI

On Wed, May 19, 2021 at 3:00 PM Ondřej Jirman <megous@...ous.com> wrote:
>
> Hello Saravana,
>
> On Wed, May 19, 2021 at 02:29:48PM -0700, Saravana Kannan wrote:
> >
> > Nothing in sun8i_hdmi_phy_probe() depends on anything from
> > sun8i_dw_hdmi.c other than getting a struct device pointer to use with
> > dev_err and some devm_* APIs. So it seems pretty straightforward to
> > fix this so that you don't have one struct device trying to represent
> > two distinct hardware blocks. What am I missing?
> >
> > Anyway, I took a swing at fixing this while preserving the ordering of
> > the important bits. The changes are fairly trivial/straightforward and
> > not meant to be final code, but can you test this out please?
>
> the patch seems to work, after fixing a few compilation issues. See
> bellow. Thanks!

Thanks for the quick test! Do you want to fix it up and get it
upstreamed? I can do it, but I have other stuff I need to take care
of. Also, I just wanted to prove the change I was suggesting wasn't
complicated and fairly trivial.

> I think the probe order is reversed, but HDMI works in my case, so
> I guess that doesn't matter in the end. Or at least it didn't in the
> short test I made.

I don't think the "probe" order really changed. Firstly there was no
real phy "probe" before. However, I'm guessing the order that really
matters is the order between sun8i_hdmi_phy_init() and dw_hdmi_bind().
My patch still preserves that and that's why I think it works fine.
sun8i_hdmi_phy_probe() was just doing a bunch of "gets" on resources
so doing that a bit earlier seens pretty harmless.

-Saravana

>
> kind regards,
>         o.
>
>
> From 0eac644368711f52fffa4246aefc546591cef090 Mon Sep 17 00:00:00 2001
> From: Ondrej Jirman <megous@...ous.com>
> Date: Wed, 19 May 2021 23:44:45 +0200
> Subject: [PATCH] fix compilation issues
>
> ---
>  drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> index c44ed22d8aef0..947b4231f6449 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> +++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> @@ -5,6 +5,7 @@
>
>  #include <linux/delay.h>
>  #include <linux/of_address.h>
> +#include <linux/of_platform.h>
>
>  #include "sun8i_dw_hdmi.h"
>
> @@ -748,7 +749,7 @@ int sun8i_hdmi_phy_probe(struct platform_device *pdev)
>         return ret;
>  }
>
> -void sun8i_hdmi_phy_remove(struct platform_device *pdev)
> +int sun8i_hdmi_phy_remove(struct platform_device *pdev)
>  {
>         struct sun8i_hdmi_phy *phy = platform_get_drvdata(pdev);
>
> --
> 2.31.1
>
>
> [    0.307254] platform 1c28000.serial: probe deferral - supplier 1c20800.pinctrl not ready
> [    0.307340] platform 1c28400.serial: probe deferral - supplier 1c20800.pinctrl not ready
> [    0.307379] platform 1c28c00.serial: probe deferral - supplier 1c20800.pinctrl not ready
> [    0.309235] fwnode_links_purge_suppliers: display-engine
> [    0.310176] platform 1c0c000.lcd-controller: probe deferral - wait for supplier mixer@...000
> [    0.310228] platform 1c0d000.lcd-controller: probe deferral - wait for supplier mixer@...000
> [    0.311902] platform 1ca0000.dsi: probe deferral - wait for supplier pmic@3a3
> [    0.312287] platform 1ee0000.hdmi: probe deferral - wait for supplier pmic@3a3
> [    0.313076] fwnode_links_purge_suppliers: hdmi-phy@...0000    <------ phy probed
> [    0.316766] platform 1c21800.lradc: probe deferral - wait for supplier pmic@3a3
> [    0.317258] platform vibrator: probe deferral - wait for supplier pmic@3a3
> [    0.318703] sun6i-rtc 1f00000.rtc: registered as rtc0
> [    0.318748] sun6i-rtc 1f00000.rtc: setting system clock to 2021-05-19T21:40:59 UTC (1621460459)
> [    0.318917] sun6i-rtc 1f00000.rtc: RTC enabled
> [    0.318938] fwnode_links_purge_suppliers: rtc@...0000
> [    0.318960] fwnode_links_purge_consumers: reboot-mode@4
> [    0.319185] i2c /dev entries driver
>
> ....
>
> [    0.453301] fwnode_links_purge_consumers: port
> [    0.453323] fwnode_links_purge_consumers: endpoint
> [    0.453346] fwnode_links_purge_consumers: panel@0
> [    0.491868] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffffffc010a44230)
> [    0.501830] sun4i-drm display-engine: bound 1200000.mixer (ops 0xffffffc010a44230)
> [    0.502915] sun4i-drm display-engine: No panel or bridge found... RGB output disabled
> [    0.502956] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xffffffc010a415a0)
> [    0.503466] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops 0xffffffc010a415a0)
> [    0.503545] sun4i-drm display-engine: bound 1ca0000.dsi (ops 0xffffffc010a431c8)
> [    0.505330] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
> [    0.507566] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
> [    0.510717] sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xffffffc010a43568)
> [    0.514674] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
> [    0.514932] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
> [    0.515160] fwnode_links_purge_suppliers: hdmi@...0000           <------ hdmi probed
> [    0.515195] fwnode_links_purge_consumers: ports
> [    0.515217] fwnode_links_purge_consumers: port@0
> [    0.515240] fwnode_links_purge_consumers: endpoint
> [    0.515264] fwnode_links_purge_consumers: port@1
> [    0.515343] fwnode_links_purge_consumers: endpoint
> [    0.517089] input: 1c21800.lradc as /devices/platform/soc/1c21800.lradc/input/input1
> [    0.517358] fwnode_links_purge_suppliers: lradc@...1800
> [    0.517384] fwnode_links_purge_consumers: button-200
> [    0.517407] fwnode_links_purge_consumers: button-400
> [    0.518414] input: gpio-vibrator as /devices/platform/vibrator/input/input2
> [    0.518582] fwnode_links_purge_suppliers: vibrator
>
>
>
> > -Saravana

Powered by blists - more mailing lists