Message-ID: <1621402273.10680.0.camel@mszsdaap41>
Date:   Wed, 19 May 2021 13:31:13 +0800
From:   Jitao Shi <jitao.shi@...iatek.com>
To:     Chun-Kuang Hu <chunkuang.hu@...nel.org>
CC:     Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Daniel Vetter <daniel@...ll.ch>,
        David Airlie <airlied@...ux.ie>,
        DRI Development <dri-devel@...ts.freedesktop.org>,
        linux-kernel <linux-kernel@...r.kernel.org>,
        DTML <devicetree@...r.kernel.org>,
        srv_heupstream <srv_heupstream@...iatek.com>,
        Huijuan Xie (谢慧娟) 
        <Huijuan.Xie@...iatek.com>,
        "stonea168@....com" <stonea168@....com>,
        Cawa Cheng (鄭曄禧) 
        <cawa.cheng@...iatek.com>,
        Rex-BC Chen (陳柏辰) 
        <Rex-BC.Chen@...iatek.com>,
        "moderated list:ARM/Mediatek SoC support" 
        <linux-mediatek@...ts.infradead.org>,
        Yingjoe Chen (陳英洲) 
        <Yingjoe.Chen@...iatek.com>,
        Eddie Huang (黃智傑) 
        <eddie.huang@...iatek.com>,
        Linux ARM <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 4/4] drm/mediatek: add dsi module reset driver

On Sat, 2021-04-24 at 07:50 +0800, Chun-Kuang Hu wrote:
> Hi, Jitao:
> 
> Jitao Shi <jitao.shi@...iatek.com> 於 2021年4月20日 週二 下午9:26寫道：
> >
> > Reset dsi HW to default when power on. Prevent the setting differet
> > between bootloader and kernel.
> >
> > Signed-off-by: Jitao Shi <jitao.shi@...iatek.com>
> > ---
> >  drivers/gpu/drm/mediatek/mtk_dsi.c | 36 +++++++++++++++++++++++++++++-
> >  1 file changed, 35 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> > index 455fe582c6b5..113438ddd4cc 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> > @@ -7,10 +7,12 @@
> >  #include <linux/component.h>
> >  #include <linux/iopoll.h>
> >  #include <linux/irq.h>
> > +#include <linux/mfd/syscon.h>
> >  #include <linux/of.h>
> >  #include <linux/of_platform.h>
> >  #include <linux/phy/phy.h>
> >  #include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> >
> >  #include <video/mipi_display.h>
> >  #include <video/videomode.h>
> > @@ -143,6 +145,8 @@
> >  #define DATA_0                         (0xff << 16)
> >  #define DATA_1                         (0xff << 24)
> >
> > +#define MMSYS_SW_RST_DSI_B BIT(25)
> > +
> >  #define NS_TO_CYCLE(n, c)    ((n) / (c) + (((n) % (c)) ? 1 : 0))
> >
> >  #define MTK_DSI_HOST_IS_READ(type) \
> > @@ -186,7 +190,8 @@ struct mtk_dsi {
> >         struct drm_bridge *next_bridge;
> >         struct drm_connector *connector;
> >         struct phy *phy;
> > -
> > +       struct regmap *mmsys_sw_rst_b;
> > +       u32 sw_rst_b;
> >         void __iomem *regs;
> >
> >         struct clk *engine_clk;
> > @@ -272,6 +277,16 @@ static void mtk_dsi_disable(struct mtk_dsi *dsi)
> >         mtk_dsi_mask(dsi, DSI_CON_CTRL, DSI_EN, 0);
> >  }
> >
> > +static void mtk_dsi_reset_all(struct mtk_dsi *dsi)
> > +{
> > +       regmap_update_bits(dsi->mmsys_sw_rst_b, dsi->sw_rst_b,
> > +                          MMSYS_SW_RST_DSI_B, 0);
> > +       usleep_range(1000, 1100);
> > +
> > +       regmap_update_bits(dsi->mmsys_sw_rst_b, dsi->sw_rst_b,
> > +                          MMSYS_SW_RST_DSI_B, MMSYS_SW_RST_DSI_B);
> > +}
> > +
> >  static void mtk_dsi_reset_engine(struct mtk_dsi *dsi)
> >  {
> >         mtk_dsi_mask(dsi, DSI_CON_CTRL, DSI_RESET, DSI_RESET);
> > @@ -985,6 +1000,8 @@ static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
> >
> >         ret = mtk_dsi_encoder_init(drm, dsi);
> >
> > +       mtk_dsi_reset_all(dsi);
> > +
> >         return ret;
> >  }
> >
> > @@ -1007,6 +1024,7 @@ static int mtk_dsi_probe(struct platform_device *pdev)
> >         struct device *dev = &pdev->dev;
> >         struct drm_panel *panel;
> >         struct resource *regs;
> > +       struct regmap *regmap;
> >         int irq_num;
> >         int ret;
> >
> > @@ -1022,6 +1040,22 @@ static int mtk_dsi_probe(struct platform_device *pdev)
> >                 return ret;
> >         }
> >
> > +       regmap = syscon_regmap_lookup_by_phandle(dev->of_node,
> > +                                                "mediatek,syscon-dsi");
> > +       ret = of_property_read_u32_index(dev->of_node, "mediatek,syscon-dsi", 1,
> > +                                        &dsi->sw_rst_b);
> > +
> > +       if (IS_ERR(regmap))
> > +               ret = PTR_ERR(regmap);
> > +
> > +       if (ret) {
> > +               ret = PTR_ERR(regmap);
> > +               dev_err(dev, "Failed to get mmsys registers: %d\n", ret);
> > +               return ret;
> > +       }
> > +
> > +       dsi->mmsys_sw_rst_b = regmap;
> > +
> 
> It looks like that mtk-mmsys is the reset controller and mtk-dsi is
> reset consumer. Please refer to [1], [2] to implement.
> 
> [1] https://www.kernel.org/doc/html/latest/driver-api/reset.html
> [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/reset/reset.txt?h=v5.12-rc8
> 
> Regards,
> Chun-Kuang.
> 

Thanks, I'll fix next version.

> >         ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
> >                                           &panel, &dsi->next_bridge);
> >         if (ret)
> > --
> > 2.25.1
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@...ts.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel

Powered by blists - more mailing lists